From: Frans Pop <elendil@planet.nl>
To: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Frans Pop <elendil@planet.nl>, "Luis R. Rodriguez" <mcgrof@gmail.com>
Subject: [PATCH 5/7] wireless/prism54: remove trailing space in messages
Date: Wed, 24 Mar 2010 19:46:33 +0100 [thread overview]
Message-ID: <1269456395-15343-5-git-send-email-elendil@planet.nl> (raw)
In-Reply-To: <201003241927.12434.elendil@planet.nl>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
---
drivers/net/wireless/p54/txrx.c | 2 +-
drivers/net/wireless/prism54/islpci_dev.c | 16 ++++++++--------
drivers/net/wireless/prism54/islpci_eth.c | 8 ++++----
drivers/net/wireless/prism54/islpci_mgt.c | 8 ++++----
drivers/net/wireless/prism54/oid_mgt.c | 2 +-
5 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index 6605799..2ceff54 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -38,7 +38,7 @@ static void p54_dump_tx_queue(struct p54_common *priv)
u32 largest_hole = 0, free;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) --- \n",
+ printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) ---\n",
wiphy_name(priv->hw->wiphy), skb_queue_len(&priv->tx_queue));
prev_addr = priv->rx_start;
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index a3ba353..7c82e43 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -227,14 +227,14 @@ islpci_interrupt(int irq, void *config)
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS,
- "IRQ: Identification register 0x%p 0x%x \n", device, reg);
+ "IRQ: Identification register 0x%p 0x%x\n", device, reg);
#endif
/* check for each bit in the register separately */
if (reg & ISL38XX_INT_IDENT_UPDATE) {
#if VERBOSE > SHOW_ERROR_MESSAGES
/* Queue has been updated */
- DEBUG(SHOW_TRACING, "IRQ: Update flag \n");
+ DEBUG(SHOW_TRACING, "IRQ: Update flag\n");
DEBUG(SHOW_QUEUE_INDEXES,
"CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
@@ -300,7 +300,7 @@ islpci_interrupt(int irq, void *config)
ISL38XX_CB_RX_DATA_LQ) != 0) {
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
- "Received frame in Data Low Queue \n");
+ "Received frame in Data Low Queue\n");
#endif
islpci_eth_receive(priv);
}
@@ -325,7 +325,7 @@ islpci_interrupt(int irq, void *config)
/* Device has been initialized */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
- "IRQ: Init flag, device initialized \n");
+ "IRQ: Init flag, device initialized\n");
#endif
wake_up(&priv->reset_done);
}
@@ -333,7 +333,7 @@ islpci_interrupt(int irq, void *config)
if (reg & ISL38XX_INT_IDENT_SLEEP) {
/* Device intends to move to powersave state */
#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n");
+ DEBUG(SHOW_TRACING, "IRQ: Sleep flag\n");
#endif
isl38xx_handle_sleep_request(priv->control_block,
&powerstate,
@@ -343,7 +343,7 @@ islpci_interrupt(int irq, void *config)
if (reg & ISL38XX_INT_IDENT_WAKEUP) {
/* Device has been woken up to active state */
#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n");
+ DEBUG(SHOW_TRACING, "IRQ: Wakeup flag\n");
#endif
isl38xx_handle_wakeup(priv->control_block,
@@ -634,7 +634,7 @@ islpci_alloc_memory(islpci_private *priv)
ioremap(pci_resource_start(priv->pdev, 0),
ISL38XX_PCI_MEM_SIZE))) {
/* error in remapping the PCI device memory address range */
- printk(KERN_ERR "PCI memory remapping failed \n");
+ printk(KERN_ERR "PCI memory remapping failed\n");
return -1;
}
@@ -901,7 +901,7 @@ islpci_setup(struct pci_dev *pdev)
if (register_netdev(ndev)) {
DEBUG(SHOW_ERROR_MESSAGES,
- "ERROR: register_netdev() failed \n");
+ "ERROR: register_netdev() failed\n");
goto do_islpci_free_memory;
}
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 872b647..af9e7fb 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -89,7 +89,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
u32 curr_frag;
#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n");
#endif
/* lock the driver code */
@@ -140,7 +140,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
}
#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data,
+ DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data,
src, skb->len);
#endif
} else {
@@ -319,7 +319,7 @@ islpci_eth_receive(islpci_private *priv)
int discard = 0;
#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n");
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n");
#endif
/* the device has written an Ethernet frame in the data area
@@ -431,7 +431,7 @@ islpci_eth_receive(islpci_private *priv)
skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
if (unlikely(skb == NULL)) {
/* error allocating an sk_buff structure elements */
- DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n");
+ DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n");
break;
}
skb_reserve(skb, (4 - (long) skb->data) & 0x03);
diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c
index 69d2f88..89b0278 100644
--- a/drivers/net/wireless/prism54/islpci_mgt.c
+++ b/drivers/net/wireless/prism54/islpci_mgt.c
@@ -113,7 +113,7 @@ islpci_mgmt_rx_fill(struct net_device *ndev)
u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]);
#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill \n");
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill\n");
#endif
while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) {
@@ -211,7 +211,7 @@ islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid,
{
pimfor_header_t *h = buf.mem;
DEBUG(SHOW_PIMFOR_FRAMES,
- "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x \n",
+ "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x\n",
h->operation, oid, h->device_id, h->flags, length);
/* display the buffer contents for debugging */
@@ -279,7 +279,7 @@ islpci_mgt_receive(struct net_device *ndev)
u32 curr_frag;
#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive \n");
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive\n");
#endif
/* Only once per interrupt, determine fragment range to
@@ -338,7 +338,7 @@ islpci_mgt_receive(struct net_device *ndev)
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_PIMFOR_FRAMES,
- "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x \n",
+ "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x\n",
header->operation, header->oid, header->device_id,
header->flags, header->length);
diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c
index 1187e61..07df70a 100644
--- a/drivers/net/wireless/prism54/oid_mgt.c
+++ b/drivers/net/wireless/prism54/oid_mgt.c
@@ -819,7 +819,7 @@ mgt_response_to_str(enum oid_num_t n, union oid_res_t *r, char *str)
k = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", list->nr);
for (i = 0; i < list->nr; i++)
k += snprintf(str + k, PRIV_STR_SIZE - k,
- "bss[%u] : \nage=%u\nchannel=%u\n"
+ "bss[%u] :\nage=%u\nchannel=%u\n"
"capinfo=0x%X\nrates=0x%X\n"
"basic_rates=0x%X\n",
i, list->bsslist[i].age,
--
1.6.6.1
next prev parent reply other threads:[~2010-03-24 18:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-24 18:27 [PATCH 00/07] net: remove trailing spaces " Frans Pop
2010-03-24 18:46 ` [PATCH 1/7] wireless: remove trailing space " Frans Pop
2010-03-24 18:46 ` [PATCH 2/7] wireless/ath: " Frans Pop
2010-03-24 18:52 ` Luis R. Rodriguez
2010-03-24 18:46 ` [PATCH 3/7] wireless/ipw2x00: " Frans Pop
2010-03-24 18:46 ` [PATCH 4/7] wireless/iwlwifi: " Frans Pop
2010-03-24 20:18 ` reinette chatre
2010-03-24 20:28 ` Frans Pop
2010-03-24 20:34 ` reinette chatre
2010-03-24 21:19 ` [PATCH 4/7 v2] " Frans Pop
2010-03-24 21:38 ` reinette chatre
2010-03-24 18:46 ` Frans Pop [this message]
2010-03-24 18:46 ` [PATCH 6/7] wireless/raylink: " Frans Pop
2010-03-24 18:46 ` [PATCH 7/7] wireless/libertas: remove trailing space in debugfs header Frans Pop
2010-03-24 21:12 ` [PATCH 00/07] net: remove trailing spaces in messages David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1269456395-15343-5-git-send-email-elendil@planet.nl \
--to=elendil@planet.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mcgrof@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®