From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932148Ab0FAUxt (ORCPT ); Tue, 1 Jun 2010 16:53:49 -0400 Received: from moutng.kundenserver.de ([212.227.17.8]:62893 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757501Ab0FAUxr (ORCPT ); Tue, 1 Jun 2010 16:53:47 -0400 From: Arnd Bergmann To: Greg KH Cc: linux-kernel@vger.kernel.org, Arnd Bergmann , Alan Cox , Frederic Weisbecker , John Kacur , Alan Cox Subject: [PATCH 18/31] serial: add port helpers Date: Tue, 1 Jun 2010 22:52:58 +0200 Message-Id: <1275425591-8803-19-git-send-email-arnd@arndb.de> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: <1275425591-8803-1-git-send-email-arnd@arndb.de> References: <1275425591-8803-1-git-send-email-arnd@arndb.de> X-Provags-ID: V01U2FsdGVkX19g2es0S9asqGMsM0fyx5uSuwUf6tUt/cbMDbI uc6loMa2EeKtNRN3B31S0dxB2JxV4I6ltO73C9Sne4aN4ex8xh Pck/zDUH9lWlmQwXdoj/Q== Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Alan Cox We can make this the same as the ones that will be needed by the tty_port helper logic that we want to move to but still call them from the existing code base. Signed-off-by: Alan Cox --- drivers/serial/serial_core.c | 51 ++++++++++++++++++++++++++++++----------- 1 files changed, 37 insertions(+), 14 deletions(-) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 424b1c7..2379045 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1501,6 +1501,34 @@ static void uart_update_termios(struct tty_struct *tty, } } +static int uart_carrier_raised(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + int mctrl; + mutex_lock(&port->mutex); + spin_lock_irq(&uport->lock); + uport->ops->enable_ms(uport); + mctrl = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + mutex_unlock(&port->mutex); + if (mctrl & TIOCM_CAR) + return 1; + return 0; +} + +static void uart_dtr_rts(struct tty_port *port, int onoff) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + mutex_lock(&port->mutex); + if (onoff) + uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + else + uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + mutex_unlock(&port->mutex); +} + /* * Block the open until the port is ready. We must be called with * the per-port semaphore held. @@ -1509,9 +1537,7 @@ static int uart_block_til_ready(struct file *filp, struct uart_state *state) { DECLARE_WAITQUEUE(wait, current); - struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; - unsigned int mctrl; unsigned long flags; spin_lock_irqsave(&port->lock, flags); @@ -1555,23 +1581,14 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) * not set RTS here - we want to make sure we catch * the data from the modem. */ - if (port->tty->termios->c_cflag & CBAUD) { - mutex_lock(&port->mutex); - uart_set_mctrl(uport, TIOCM_DTR); - mutex_unlock(&port->mutex); - } + if (port->tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); /* * and wait for the carrier to indicate that the * modem is ready for us. */ - mutex_lock(&port->mutex); - spin_lock_irq(&uport->lock); - uport->ops->enable_ms(uport); - mctrl = uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); - mutex_unlock(&port->mutex); - if (mctrl & TIOCM_CAR) + if (tty_port_carrier_raised(port)) break; schedule(); @@ -2349,6 +2366,11 @@ static const struct tty_operations uart_ops = { #endif }; +static const struct tty_port_operations uart_port_ops = { + .carrier_raised = uart_carrier_raised, + .dtr_rts = uart_dtr_rts, +}; + /** * uart_register_driver - register a driver with the uart core layer * @drv: low level driver structure @@ -2405,6 +2427,7 @@ int uart_register_driver(struct uart_driver *drv) struct tty_port *port = &state->port; tty_port_init(port); + port->ops = &uart_port_ops; port->close_delay = 500; /* .5 seconds */ port->closing_wait = 30000; /* 30 seconds */ tasklet_init(&state->tlet, uart_tasklet_action, -- 1.7.0.4