From: ygeorgie@gmail.com
To: linux-kernel@vger.kernel.org
Cc: Yury Georgievskiy <ygeorgie@gmail.com>
Subject: [PATCH 1/1] serial: mcf: Don't take spinlocks in already protected functions
Date: Wed, 9 Jun 2010 09:56:26 +0200 [thread overview]
Message-ID: <1276070186-11393-1-git-send-email-ygeorgie@gmail.com> (raw)
From: Yury Georgievskiy <ygeorgie@gmail.com>
Don't take the port spinlock in uart functions where the serial core
already takes care of locking/unlocking them.
The code would actually lock up on architectures where spinlocks are
implemented.
Also protect calling mcf_rx_chars/mcf_tx_chars in the
interrupt handler by the port spinlock and use IRQ_RETVAL
to return from isr.
Signed-off-by: Yury Georgievskiy <ygeorgie@gmail.com>
---
drivers/serial/mcf.c | 22 ++++++----------------
1 files changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index b5aaef9..6235444 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -70,16 +70,14 @@ static unsigned int mcf_tx_empty(struct uart_port *port)
static unsigned int mcf_get_mctrl(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
unsigned int sigs;
- spin_lock_irqsave(&port->lock, flags);
sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ?
0 : TIOCM_CTS;
sigs |= (pp->sigs & TIOCM_RTS);
sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0);
sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0);
- spin_unlock_irqrestore(&port->lock, flags);
+
return sigs;
}
@@ -88,16 +86,13 @@ static unsigned int mcf_get_mctrl(struct uart_port *port)
static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->sigs = sigs;
mcf_setppdtr(port->line, (sigs & TIOCM_DTR));
if (sigs & TIOCM_RTS)
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
else
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -105,12 +100,9 @@ static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
static void mcf_start_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr |= MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -118,12 +110,9 @@ static void mcf_start_tx(struct uart_port *port)
static void mcf_stop_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -131,12 +120,9 @@ static void mcf_stop_tx(struct uart_port *port)
static void mcf_stop_rx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~MCFUART_UIR_RXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -368,11 +354,15 @@ static irqreturn_t mcf_interrupt(int irq, void *data)
unsigned int isr;
isr = readb(port->membase + MCFUART_UISR) & pp->imr;
+
+ spin_lock(&port->lock);
if (isr & MCFUART_UIR_RXREADY)
mcf_rx_chars(pp);
if (isr & MCFUART_UIR_TXREADY)
mcf_tx_chars(pp);
- return IRQ_HANDLED;
+ spin_unlock(&port->lock);
+
+ return IRQ_RETVAL(isr);
}
/****************************************************************************/
--
1.7.0
next reply other threads:[~2010-06-09 7:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-09 7:56 ygeorgie [this message]
2010-06-14 19:12 ` Andrew Morton
2010-06-14 20:20 ` Yury Georgievskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1276070186-11393-1-git-send-email-ygeorgie@gmail.com \
--to=ygeorgie@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®