From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>,
Linus Walleij <linus.walleij@stericsson.com>
Cc: linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] mfd: Staticise ab3550 register access functions
Date: Wed, 9 Jun 2010 14:54:54 +0100 [thread overview]
Message-ID: <1276091694-31331-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
These are now exported via an ops table rather than referenced
directly and so should be staticised.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/ab3550-core.c | 23 ++++++++++++-----------
1 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c
index f54ab62..8a98739 100644
--- a/drivers/mfd/ab3550-core.c
+++ b/drivers/mfd/ab3550-core.c
@@ -589,16 +589,16 @@ static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
}
/*
- * The exported register access functionality.
+ * The register access functionality.
*/
-int ab3550_get_chip_id(struct device *dev)
+static int ab3550_get_chip_id(struct device *dev)
{
struct ab3550 *ab = dev_get_drvdata(dev->parent);
return (int)ab->chip_id;
}
-int ab3550_mask_and_set_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues)
+static int ab3550_mask_and_set_register_interruptible(struct device *dev,
+ u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
{
struct ab3550 *ab;
struct platform_device *pdev = to_platform_device(dev);
@@ -612,15 +612,15 @@ int ab3550_mask_and_set_register_interruptible(struct device *dev, u8 bank,
bitmask, bitvalues);
}
-int ab3550_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
- u8 value)
+static int ab3550_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 value)
{
return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
value);
}
-int ab3550_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
- u8 *value)
+static int ab3550_get_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 *value)
{
struct ab3550 *ab;
struct platform_device *pdev = to_platform_device(dev);
@@ -633,7 +633,7 @@ int ab3550_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
return get_register_interruptible(ab, bank, reg, value);
}
-int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
+static int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
u8 first_reg, u8 *regvals, u8 numregs)
{
struct ab3550 *ab;
@@ -649,7 +649,8 @@ int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
numregs);
}
-int ab3550_event_registers_startup_state_get(struct device *dev, u8 *event)
+static int ab3550_event_registers_startup_state_get(struct device *dev,
+ u8 *event)
{
struct ab3550 *ab;
@@ -661,7 +662,7 @@ int ab3550_event_registers_startup_state_get(struct device *dev, u8 *event)
return 0;
}
-int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
+static int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
{
struct ab3550 *ab;
struct ab3550_platform_data *plf_data;
--
1.7.1
next reply other threads:[~2010-06-09 13:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-09 13:54 Mark Brown [this message]
2010-06-10 14:40 ` Linus WALLEIJ
2010-06-18 21:55 ` Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1276091694-31331-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linus.walleij@stericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®