From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 40/67] tty: reorder ldisc locking
Date: Thu, 5 Aug 2010 15:23:07 -0700 [thread overview]
Message-ID: <1281047014-23429-40-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20100805213528.GA13794@kroah.com>
From: Arnd Bergmann <arnd@arndb.de>
We need to release the BTM in paste_selection() when
sleeping in tty_ldisc_ref_wait to avoid deadlocks
with tty_ldisc_enable.
In tty_set_ldisc, we now always grab the BTM before
taking the ldisc_mutex in order to avoid AB-BA
deadlocks between the two.
tty_ldisc_halt potentially blocks on a workqueue
function that takes the BTM, so we must release
the BTM before calling it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/selection.c | 9 +++++++--
drivers/char/tty_ldisc.c | 24 ++++++++++++++++++++----
2 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index 85211a3..75889cd 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -319,8 +319,13 @@ int paste_selection(struct tty_struct *tty)
poke_blanked_console();
release_console_sem();
- ld = tty_ldisc_ref_wait(tty);
-
+ ld = tty_ldisc_ref(tty);
+ if (!ld) {
+ tty_unlock();
+ ld = tty_ldisc_ref_wait(tty);
+ tty_lock();
+ }
+
add_wait_queue(&vc->paste_wait, &wait);
while (sel_buffer && sel_buffer_lth > pasted) {
set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 97681ff..0f49479 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -582,6 +582,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
tty_wait_until_sent(tty, 0);
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
/*
@@ -591,13 +592,13 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
mutex_unlock(&tty->ldisc_mutex);
+ tty_unlock();
wait_event(tty_ldisc_wait,
test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
}
- tty_lock();
-
set_bit(TTY_LDISC_CHANGING, &tty->flags);
/*
@@ -634,8 +635,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
flush_scheduled_work();
- mutex_lock(&tty->ldisc_mutex);
tty_lock();
+ mutex_lock(&tty->ldisc_mutex);
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
@@ -782,7 +783,20 @@ void tty_ldisc_hangup(struct tty_struct *tty)
* Avoid racing set_ldisc or tty_ldisc_release
*/
mutex_lock(&tty->ldisc_mutex);
- tty_ldisc_halt(tty);
+
+ /*
+ * this is like tty_ldisc_halt, but we need to give up
+ * the BTM before calling cancel_delayed_work_sync,
+ * which may need to wait for another function taking the BTM
+ */
+ clear_bit(TTY_LDISC, &tty->flags);
+ tty_unlock();
+ cancel_delayed_work_sync(&tty->buf.work);
+ mutex_unlock(&tty->ldisc_mutex);
+
+ tty_lock();
+ mutex_lock(&tty->ldisc_mutex);
+
/* At this point we have a closed ldisc and we want to
reopen it. We could defer this to the next open but
it means auditing a lot of other paths so this is
@@ -853,8 +867,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
* race with the set_ldisc code path.
*/
+ tty_unlock();
tty_ldisc_halt(tty);
flush_scheduled_work();
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
/*
--
1.7.2
next prev parent reply other threads:[~2010-08-05 22:39 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-05 21:35 [GIT PATCH] TTY patches for 2.6.36 Greg KH
2010-08-05 22:22 ` [PATCH 01/67] n_gsm.c: removed duplicated #includes Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 02/67] serial: There's no config CONSOLE Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 03/67] vt: clean up the code - use kernel library Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 04/67] serial: add UART_CAP_EFR and UART_CAP_SLEEP flags to 16C950 UARTs definition Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 05/67] mrst_max3110: add UART driver for Max3110 on Moorestown Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 06/67] max3110 sanity check a register Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 07/67] serial: replace open coded mutex with a real mutex in mrst_max3110.c Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 08/67] serial: fix wakup races in the mrst_max3110 driver Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 09/67] tty: Remove Hayes ESP ioctls Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 10/67] tty: remove remaining " Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 11/67] tty: Add EXTPROC support for LINEMODE Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 12/67] vt/console: try harder to print output when panicing Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 13/67] stallion: prune lock_kernel calls Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 14/67] istallion: use bit ops for the board flags Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 15/67] riscom8: kill use of lock_kernel Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 16/67] isicom: kill off the BKL Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 17/67] rocket: kill BKL Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 18/67] synclink: kill the big kernel lock Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 19/67] cyclades: Kill off BKL usage Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 20/67] epca: Kill the big kernel lock Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 21/67] specialix: Kill the BKL Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 22/67] tty: Fix the digi acceleport driver NULL checks Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 23/67] synclink: reworking locking a bit Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 24/67] tty: serial - fix various misuses/mishandlings of port->tty Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 25/67] tty: serial - fix tty back references in termios Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 26/67] tty: serial - fix tty referencing in set_ldisc Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 27/67] vc: Locking clean up Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 28/67] tty: Make vt's have a tty_port Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 29/67] tty: Move the vt_tty field from the vc_data into the standard tty_port Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 30/67] serial: Change the wait for carrier locking Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 31/67] serial: add port helpers Greg Kroah-Hartman
2010-08-05 22:22 ` [PATCH 32/67] serial: trim locking on the helpers Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 33/67] serial: Use block_til_ready helper Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 34/67] serial: fix termios settings in open Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 35/67] tty: replace BKL with a new tty_lock Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 36/67] tty: never hold BTM while getting tty_mutex Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 37/67] tty: fix console_sem lock order Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 38/67] cdc-acm: remove dead code Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 39/67] tty: introduce wait_event_interruptible_tty Greg Kroah-Hartman
2010-08-05 22:23 ` Greg Kroah-Hartman [this message]
2010-08-05 22:23 ` [PATCH 41/67] tty: untangle locking of wait_until_sent Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 42/67] tty: remove tty_lock_nested Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 43/67] tty: implement BTM as mutex instead of BKL Greg Kroah-Hartman
2010-08-06 19:40 ` [PATCH retry] " Arnd Bergmann
2010-08-05 22:23 ` [PATCH 44/67] tty: release BTM while sleeping in block_til_ready Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 45/67] 8250: fix set_ldisc operation Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 46/67] tty: avoid recursive BTM in pty_close Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 47/67] serial: max3107: introduce a max3107 driver Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 48/67] serial: max3107: Abstract out the platform specific bits Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 49/67] tty_io: remove casts from void* Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 50/67] vt: Fix warning: statement with no effect due to vt_kern.h Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 51/67] serial: crisv10: formatting of pointers in printk() Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 52/67] serial: "altera_uart: simplify altera_uart_console_putc()" checkpatch fixes Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 53/67] serial: fix missing bit coverage of ASYNC_FLAGS Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 54/67] serial: general fixes in the serial_rs485 structure Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 55/67] serial: mcf: don't take spinlocks in already protected functions Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 56/67] serial: MMIO32 support for 8250_early.c Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 57/67] timbuart: use __devinit and __devexit macros for probe and remove Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 58/67] serial: 68328serial.c: remove dead (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 59/67] serial: add support for OX16PCI958 card Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 60/67] mxser: remove unnesesary NULL check Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 61/67] hsu: driver for Medfield High Speed UART device Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 62/67] hsu: add a periodic timer to check dma rx channel Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 63/67] hsu: some code cleanup Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 64/67] hsu: call PCI pm hooks in suspend/resume function Greg Kroah-Hartman
2010-08-05 22:23 ` [PATCH 65/67] serial: max3107: Fix gpiolib support Greg Kroah-Hartman
2010-08-06 18:40 ` [GIT PATCH] TTY patches for 2.6.36 Linus Torvalds
2010-08-06 18:51 ` Greg KH
2010-08-06 19:40 ` Arnd Bergmann
2010-08-06 19:45 ` Alan Cox
2010-08-06 19:37 ` Greg KH
2010-08-06 19:38 ` Linus Torvalds
2010-08-06 19:58 ` Arnd Bergmann
2010-08-06 20:11 ` Linus Torvalds
2010-08-06 20:19 ` Arnd Bergmann
2010-08-06 20:22 ` Greg KH
2010-08-09 16:06 ` Andy Whitcroft
2010-08-09 18:38 ` Arnd Bergmann
2010-08-09 19:24 ` Alan Cox
2010-08-10 7:31 ` Andy Whitcroft
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281047014-23429-40-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome