From: Mike Frysinger <vapier@gentoo.org>
To: uclinux-dist-devel@blackfin.uclinux.org
Cc: linux-kernel@vger.kernel.org
Subject: Blackfin updates for 2.6.36-rc0
Date: Fri, 6 Aug 2010 12:30:06 -0400 [thread overview]
Message-ID: <1281112206-31808-1-git-send-email-vapier@gentoo.org> (raw)
This update is focused on the core architecture. It features support
for dynamic ftrace, clean ups & bug fixes for the GPIO/portmux core,
a few random important bug fixes, and general cleanup of the global
namespace with some peripherals.
Another update will go out that features board updates.
Christian Dietrich (1):
Blackfin: remove CONFIG_MEM_GENERIC_BOARD
Michael Hennerich (7):
Blackfin: fix DMA/cache bug when resuming from suspend to RAM
Blackfin: make sure mmiowb inserts a write barrier with SSYNC
Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger
options
Blackfin: remove useless and outdated documentation
Blackfin: document SPI CS limitations with CPHA=0
Blackfin: portmux: fix peripheral map overflow when requesting pins
Blackfin: dpmc: punt unnecessary RTC_ISTAT clearing
Mike Frysinger (25):
Blackfin: switch to asm-generic/io.h
Blackfin: punt NFC MMR bits
Blackfin: new dynamic bfin read/write mmr helpers
Blackfin: stub fpregs dumping
Blackfin: use common EXCEPTION_TABLE() in vmlinux.lds
Blackfin: move MPU anomaly check to common location
Blackfin: merge anomalies 475 and 220 to follow official lists
Blackfin: update anomaly lists to latest public info
Blackfin: allow cache funcs to be in L1 for IFLUSH Anomaly 05000491
Blackfin: gpio: unify & clean up reserved map handling
Blackfin: BF54x: add ifdef protection to gpio header
Blackfin: BF51x: fix typo in HWAIT pin define
Blackfin: fix typo in hweight asm
Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CS
Blackfin: BF51x: fix handling of PH8 (the "internal" SPI0SEL4 pin)
Blackfin: gpio/portmux: clean up whitespace corruption
Blackfin: add support for LZO compressed kernels
Blackfin: add support for dynamic ftrace
Blackfin: add EVT_OVERRIDE/IPRIO core MMR helpers
Blackfin: TWI: clean up the MMR names
Blackfin: BF54x: tweak DMAC MMR naming to match other ports
Blackfin: unify SDH/RSI bitmasks
Blackfin: unify rotary encoder bitmasks
Blackfin: update defconfigs
Blackfin: gpio: add a debounce stub
Documentation/blackfin/00-INDEX | 11 +-
Documentation/blackfin/Filesystems | 169 -------------
Documentation/blackfin/bfin-spi-notes.txt | 14 +
Documentation/blackfin/cachefeatures.txt | 55 ----
arch/blackfin/Kconfig | 20 ++-
arch/blackfin/Makefile | 3 +-
arch/blackfin/boot/Makefile | 11 +-
arch/blackfin/configs/BF518F-EZBRD_defconfig | 163 ++++++++-----
arch/blackfin/configs/BF526-EZBRD_defconfig | 129 ++++++++--
arch/blackfin/configs/BF527-EZKIT-V2_defconfig | 149 +++++++++---
arch/blackfin/configs/BF527-EZKIT_defconfig | 139 ++++++++---
arch/blackfin/configs/BF533-EZKIT_defconfig | 93 ++++++--
arch/blackfin/configs/BF533-STAMP_defconfig | 131 +++++++---
arch/blackfin/configs/BF537-STAMP_defconfig | 141 ++++++++----
arch/blackfin/configs/BF538-EZKIT_defconfig | 121 +++++++---
arch/blackfin/configs/BF548-EZKIT_defconfig | 156 +++++++++----
arch/blackfin/configs/BF561-ACVILON_defconfig | 1 -
arch/blackfin/configs/BF561-EZKIT_defconfig | 85 ++++++-
arch/blackfin/configs/CM-BF527_defconfig | 1 -
arch/blackfin/configs/CM-BF533_defconfig | 1 -
arch/blackfin/configs/CM-BF537E_defconfig | 1 -
arch/blackfin/configs/CM-BF537U_defconfig | 1 -
arch/blackfin/configs/CM-BF548_defconfig | 1 -
arch/blackfin/configs/CM-BF561_defconfig | 1 -
arch/blackfin/configs/PNAV-10_defconfig | 123 +++++++---
arch/blackfin/configs/TCM-BF518_defconfig | 1 -
arch/blackfin/configs/TCM-BF537_defconfig | 1 -
arch/blackfin/include/asm/bfin_rotary.h | 74 ++++++-
arch/blackfin/include/asm/bfin_sdh.h | 119 +++++++++-
arch/blackfin/include/asm/bitops.h | 2 +-
arch/blackfin/include/asm/cdef_LPBlackfin.h | 8 +-
arch/blackfin/include/asm/def_LPBlackfin.h | 18 ++
arch/blackfin/include/asm/dma.h | 1 +
arch/blackfin/include/asm/elf.h | 1 +
arch/blackfin/include/asm/ftrace.h | 16 ++
arch/blackfin/include/asm/gpio.h | 111 +++++----
arch/blackfin/include/asm/io.h | 262 +++-----------------
arch/blackfin/include/asm/mem_init.h | 18 --
arch/blackfin/include/asm/portmux.h | 10 +-
arch/blackfin/kernel/Makefile | 1 +
arch/blackfin/kernel/bfin_dma_5xx.c | 19 ++-
arch/blackfin/kernel/bfin_gpio.c | 111 +++++----
arch/blackfin/kernel/cplb-mpu/cplbinit.c | 4 -
arch/blackfin/kernel/ftrace-entry.S | 85 ++++++-
arch/blackfin/kernel/ftrace.c | 86 +++++++-
arch/blackfin/kernel/setup.c | 7 +
arch/blackfin/kernel/vmlinux.lds.S | 7 +-
arch/blackfin/mach-bf518/Kconfig | 61 +++++
arch/blackfin/mach-bf518/include/mach/anomaly.h | 21 ++-
arch/blackfin/mach-bf518/include/mach/bf518.h | 105 ++++++++
arch/blackfin/mach-bf518/include/mach/defBF514.h | 135 ----------
.../mach-bf518/include/mach/defBF51x_base.h | 144 ++----------
arch/blackfin/mach-bf518/include/mach/gpio.h | 83 +++---
arch/blackfin/mach-bf518/include/mach/portmux.h | 7 +-
arch/blackfin/mach-bf527/Kconfig | 66 +++++
arch/blackfin/mach-bf527/include/mach/anomaly.h | 22 ++-
arch/blackfin/mach-bf527/include/mach/bf527.h | 120 +++++++++
.../mach-bf527/include/mach/defBF52x_base.h | 225 ++---------------
arch/blackfin/mach-bf527/include/mach/gpio.h | 96 ++++----
arch/blackfin/mach-bf527/include/mach/portmux.h | 3 +-
arch/blackfin/mach-bf533/include/mach/anomaly.h | 10 +-
arch/blackfin/mach-bf533/include/mach/gpio.h | 32 ++--
arch/blackfin/mach-bf533/include/mach/portmux.h | 3 +-
arch/blackfin/mach-bf537/include/mach/anomaly.h | 11 +-
arch/blackfin/mach-bf537/include/mach/defBF534.h | 36 ++--
arch/blackfin/mach-bf537/include/mach/gpio.h | 96 ++++----
arch/blackfin/mach-bf537/include/mach/portmux.h | 7 +-
arch/blackfin/mach-bf538/include/mach/anomaly.h | 16 +-
arch/blackfin/mach-bf538/include/mach/cdefBF538.h | 64 -----
arch/blackfin/mach-bf538/include/mach/defBF539.h | 14 +-
arch/blackfin/mach-bf538/include/mach/gpio.h | 108 ++++----
arch/blackfin/mach-bf538/include/mach/portmux.h | 1 +
arch/blackfin/mach-bf548/include/mach/anomaly.h | 16 +-
.../mach-bf548/include/mach/cdefBF54x_base.h | 16 +-
arch/blackfin/mach-bf548/include/mach/defBF542.h | 130 ----------
arch/blackfin/mach-bf548/include/mach/defBF544.h | 6 +-
arch/blackfin/mach-bf548/include/mach/defBF547.h | 136 +----------
.../mach-bf548/include/mach/defBF54x_base.h | 152 +-----------
arch/blackfin/mach-bf548/include/mach/gpio.h | 10 +
arch/blackfin/mach-bf548/include/mach/portmux.h | 3 +-
arch/blackfin/mach-bf561/include/mach/anomaly.h | 13 +-
arch/blackfin/mach-bf561/include/mach/gpio.h | 96 ++++----
arch/blackfin/mach-bf561/include/mach/portmux.h | 3 +-
arch/blackfin/mach-common/arch_checks.c | 16 +-
arch/blackfin/mach-common/cache.S | 15 +-
arch/blackfin/mach-common/dpmc_modes.S | 24 --
arch/blackfin/mach-common/pm.c | 17 +-
include/asm-generic/io.h | 56 +++++
88 files changed, 2563 insertions(+), 2314 deletions(-)
delete mode 100644 Documentation/blackfin/Filesystems
create mode 100644 Documentation/blackfin/bfin-spi-notes.txt
delete mode 100644 Documentation/blackfin/cachefeatures.txt
--
1.7.2
next reply other threads:[~2010-08-06 16:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-06 16:30 Mike Frysinger [this message]
2010-08-06 16:40 ` Mike Frysinger
2010-08-06 20:57 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281112206-31808-1-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®