mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
	Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 39/68] tty: introduce wait_event_interruptible_tty
Date: Tue, 10 Aug 2010 14:59:01 -0700	[thread overview]
Message-ID: <1281477570-18944-39-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20100810214425.GB17385@kroah.com>

From: Arnd Bergmann <arnd@arndb.de>

Calling wait_event_interruptible implicitly
releases the BKL when it sleeps, but we need
to do this explcitly when we have converted
it to a mutex.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/cyclades.c  |    2 +-
 drivers/char/istallion.c |   12 ++++++++----
 drivers/char/n_r3964.c   |    2 +-
 drivers/char/tty_port.c  |    2 +-
 drivers/char/vt_ioctl.c  |    5 ++++-
 drivers/serial/crisv10.c |    4 ++--
 include/linux/tty.h      |   42 ++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 59 insertions(+), 10 deletions(-)

diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 51acfe3..27aad94 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -1607,7 +1607,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	 * If the port is the middle of closing, bail out now
 	 */
 	if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
-		wait_event_interruptible(info->port.close_wait,
+		wait_event_interruptible_tty(info->port.close_wait,
 				!(info->port.flags & ASYNC_CLOSING));
 		return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
 	}
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 5e9a81d..be28391 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -954,7 +954,7 @@ static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned l
  *	order of opens and closes may not be preserved across shared
  *	memory, so we must wait until it is complete.
  */
-	wait_event_interruptible(portp->raw_wait,
+	wait_event_interruptible_tty(portp->raw_wait,
 			!test_bit(ST_CLOSING, &portp->state));
 	if (signal_pending(current)) {
 		return -ERESTARTSYS;
@@ -989,7 +989,7 @@ static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned l
 	set_bit(ST_OPENING, &portp->state);
 	spin_unlock_irqrestore(&brd_lock, flags);
 
-	wait_event_interruptible(portp->raw_wait,
+	wait_event_interruptible_tty(portp->raw_wait,
 			!test_bit(ST_OPENING, &portp->state));
 	if (signal_pending(current))
 		rc = -ERESTARTSYS;
@@ -1020,7 +1020,7 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned
  *	occurs on this port.
  */
 	if (wait) {
-		wait_event_interruptible(portp->raw_wait,
+		wait_event_interruptible_tty(portp->raw_wait,
 				!test_bit(ST_CLOSING, &portp->state));
 		if (signal_pending(current)) {
 			return -ERESTARTSYS;
@@ -1052,7 +1052,7 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned
  *	to come back.
  */
 	rc = 0;
-	wait_event_interruptible(portp->raw_wait,
+	wait_event_interruptible_tty(portp->raw_wait,
 			!test_bit(ST_CLOSING, &portp->state));
 	if (signal_pending(current))
 		rc = -ERESTARTSYS;
@@ -1073,6 +1073,10 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned
 
 static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
 {
+	/*
+	 * no need for wait_event_tty because clearing ST_CMDING cannot block
+	 * on BTM
+	 */
 	wait_event_interruptible(portp->raw_wait,
 			!test_bit(ST_CMDING, &portp->state));
 	if (signal_pending(current))
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index f4bd259..a98290d 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -1079,7 +1079,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
 				goto unlock;
 			}
 			/* block until there is a message: */
-			wait_event_interruptible(pInfo->read_wait,
+			wait_event_interruptible_tty(pInfo->read_wait,
 					(pMsg = remove_msg(pInfo, pClient)));
 		}
 
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index a3bd1d0..35eb304 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -231,7 +231,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 
 	/* block if port is in the process of being closed */
 	if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
-		wait_event_interruptible(port->close_wait,
+		wait_event_interruptible_tty(port->close_wait,
 				!(port->flags & ASYNC_CLOSING));
 		if (port->flags & ASYNC_HUP_NOTIFY)
 			return -EAGAIN;
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index cf87c53..2bbeaae 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -133,7 +133,7 @@ static void vt_event_wait(struct vt_event_wait *vw)
 	list_add(&vw->list, &vt_events);
 	spin_unlock_irqrestore(&vt_event_lock, flags);
 	/* Wait for it to pass */
-	wait_event_interruptible(vt_event_waitqueue, vw->done);
+	wait_event_interruptible_tty(vt_event_waitqueue, vw->done);
 	/* Dequeue it */
 	spin_lock_irqsave(&vt_event_lock, flags);
 	list_del(&vw->list);
@@ -1761,10 +1761,13 @@ int vt_move_to_console(unsigned int vt, int alloc)
 		return -EIO;
 	}
 	release_console_sem();
+	tty_lock();
 	if (vt_waitactive(vt + 1)) {
 		pr_debug("Suspend: Can't switch VCs.");
+		tty_unlock();
 		return -EINTR;
 	}
+	tty_unlock();
 	return prev;
 }
 
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index f848e18..94bfb9f 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -3992,7 +3992,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible(info->close_wait,
+		wait_event_interruptible_tty(info->close_wait,
 			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		if (info->flags & ASYNC_HUP_NOTIFY)
@@ -4150,7 +4150,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible(info->close_wait,
+		wait_event_interruptible_tty(info->close_wait,
 			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		return ((info->flags & ASYNC_HUP_NOTIFY) ?
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 6ead6b6..955d72e 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -607,5 +607,47 @@ static inline void tty_unlock(void) __releases(kernel_lock)
 }
 #define tty_locked()		(kernel_locked())
 
+/*
+ * wait_event_interruptible_tty -- wait for a condition with the tty lock held
+ *
+ * The condition we are waiting for might take a long time to
+ * become true, or might depend on another thread taking the
+ * BTM. In either case, we need to drop the BTM to guarantee
+ * forward progress. This is a leftover from the conversion
+ * from the BKL and should eventually get removed as the BTM
+ * falls out of use.
+ *
+ * Do not use in new code.
+ */
+#define wait_event_interruptible_tty(wq, condition)			\
+({									\
+	int __ret = 0;							\
+	if (!(condition)) {						\
+		__wait_event_interruptible_tty(wq, condition, __ret);	\
+	}								\
+	__ret;								\
+})
+
+#define __wait_event_interruptible_tty(wq, condition, ret)		\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		if (!signal_pending(current)) {				\
+			tty_unlock();					\
+			schedule();					\
+			tty_lock();					\
+			continue;					\
+		}							\
+		ret = -ERESTARTSYS;					\
+		break;							\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+
 #endif /* __KERNEL__ */
 #endif
-- 
1.7.2


  parent reply	other threads:[~2010-08-10 22:00 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-10 21:44 [GIT PATCH] TTY patches for 2.6.36, try 2 Greg KH
2010-08-10 21:58 ` [PATCH 01/68] n_gsm.c: removed duplicated #includes Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 02/68] serial: There's no config CONSOLE Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 03/68] vt: clean up the code - use kernel library Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 04/68] serial: add UART_CAP_EFR and UART_CAP_SLEEP flags to 16C950 UARTs definition Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 05/68] mrst_max3110: add UART driver for Max3110 on Moorestown Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 06/68] max3110 sanity check a register Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 07/68] serial: replace open coded mutex with a real mutex in mrst_max3110.c Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 08/68] serial: fix wakup races in the mrst_max3110 driver Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 09/68] tty: Remove Hayes ESP ioctls Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 10/68] tty: remove remaining " Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 11/68] tty: Add EXTPROC support for LINEMODE Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 12/68] vt/console: try harder to print output when panicing Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 13/68] stallion: prune lock_kernel calls Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 14/68] istallion: use bit ops for the board flags Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 15/68] riscom8: kill use of lock_kernel Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 16/68] isicom: kill off the BKL Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 17/68] rocket: kill BKL Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 18/68] synclink: kill the big kernel lock Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 19/68] cyclades: Kill off BKL usage Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 20/68] epca: Kill the big kernel lock Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 21/68] specialix: Kill the BKL Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 22/68] tty: Fix the digi acceleport driver NULL checks Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 23/68] synclink: reworking locking a bit Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 24/68] tty: serial - fix various misuses/mishandlings of port->tty Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 25/68] tty: serial - fix tty back references in termios Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 26/68] tty: serial - fix tty referencing in set_ldisc Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 27/68] vc: Locking clean up Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 28/68] tty: Make vt's have a tty_port Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 29/68] tty: Move the vt_tty field from the vc_data into the standard tty_port Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 30/68] serial: Change the wait for carrier locking Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 31/68] serial: add port helpers Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 32/68] serial: trim locking on the helpers Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 33/68] serial: Use block_til_ready helper Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 34/68] serial: fix termios settings in open Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 35/68] tty: replace BKL with a new tty_lock Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 36/68] tty: never hold BTM while getting tty_mutex Greg Kroah-Hartman
2010-08-10 21:58 ` [PATCH 37/68] tty: fix console_sem lock order Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 38/68] cdc-acm: remove dead code Greg Kroah-Hartman
2010-08-10 21:59 ` Greg Kroah-Hartman [this message]
2010-08-10 21:59 ` [PATCH 40/68] tty: reorder ldisc locking Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 41/68] tty: untangle locking of wait_until_sent Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 42/68] tty: remove tty_lock_nested Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 43/68] tty: implement BTM as mutex instead of BKL Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 44/68] tty: release BTM while sleeping in block_til_ready Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 45/68] 8250: fix set_ldisc operation Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 46/68] tty: avoid recursive BTM in pty_close Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 47/68] serial: max3107: introduce a max3107 driver Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 48/68] serial: max3107: Abstract out the platform specific bits Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 49/68] tty_io: remove casts from void* Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 50/68] vt: Fix warning: statement with no effect due to vt_kern.h Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 51/68] serial: crisv10: formatting of pointers in printk() Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 52/68] serial: "altera_uart: simplify altera_uart_console_putc()" checkpatch fixes Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 53/68] serial: fix missing bit coverage of ASYNC_FLAGS Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 54/68] serial: general fixes in the serial_rs485 structure Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 55/68] serial: mcf: don't take spinlocks in already protected functions Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 56/68] serial: MMIO32 support for 8250_early.c Greg Kroah-Hartman
2010-08-12 18:43   ` Tony Luck
2010-08-12 18:46     ` Greg KH
2010-08-12 19:16       ` [PATCH] print early console device address in hex Luck, Tony
2010-08-10 21:59 ` [PATCH 57/68] timbuart: use __devinit and __devexit macros for probe and remove Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 58/68] serial: 68328serial.c: remove dead (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 59/68] serial: add support for OX16PCI958 card Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 60/68] mxser: remove unnesesary NULL check Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 61/68] hsu: driver for Medfield High Speed UART device Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 62/68] hsu: add a periodic timer to check dma rx channel Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 63/68] hsu: some code cleanup Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 64/68] hsu: call PCI pm hooks in suspend/resume function Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 65/68] serial: max3107: Fix gpiolib support Greg Kroah-Hartman
2010-08-10 21:59 ` [PATCH 68/68] U6715 16550A serial driver support Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1281477570-18944-39-git-send-email-gregkh@suse.de \
    --to=gregkh@suse.de \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=arnd@arndb.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome