mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Henrik Rydberg" <rydberg@euromail.se>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ping Cheng <pingc@wacom.com>,
	Chris Bagwell <chris@cnpbagwell.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Henrik Rydberg <rydberg@euromail.se>
Subject: [PATCH 5/5] input: wacom: Add a quirk for lowres Bamboo devices (rev2)
Date: Sat,  4 Sep 2010 15:43:03 +0200	[thread overview]
Message-ID: <1283607783-29388-6-git-send-email-rydberg@euromail.se> (raw)
In-Reply-To: <1283607783-29388-1-git-send-email-rydberg@euromail.se>

The Bamboo Touch reports a sub-screen resolution of 480x320.
The signal-to-noise ratio is only about 100, so filtering is
needed in order to reduce the jitter to a usable level. However,
the low resolution leads to round-off errors in the EWMA filter,
resulting in extremely jerky pointer motion. This patch explicitly
sets a higher resolution for those devices, and tells this to
the completion handler via a low-resolution quirk.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
---
 drivers/input/tablet/wacom_wac.c |   10 ++++++++++
 drivers/input/tablet/wacom_wac.h |    1 +
 2 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 97295aa..8193892 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -858,6 +858,7 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
 {
 	static int trkid;
+	struct wacom_features *features = &wacom->features;
 	struct input_dev *input = wacom->input;
 	unsigned char *data = wacom->data;
 	int sp = 0, sx = 0, sy = 0, count = 0;
@@ -872,6 +873,10 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
 		if (p) {
 			int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff;
 			int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff;
+			if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
+				x <<= 5;
+				y <<= 5;
+			}
 			input_report_abs(input, ABS_MT_PRESSURE, p);
 			input_report_abs(input, ABS_MT_POSITION_X, x);
 			input_report_abs(input, ABS_MT_POSITION_Y, y);
@@ -1010,8 +1015,13 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 
 	/* quirks for bamboo touch */
 	if (features->type == BAMBOO_PT) {
+		features->x_max <<= 5;
+		features->y_max <<= 5;
+		features->x_fuzz <<= 5;
+		features->y_fuzz <<= 5;
 		features->pressure_max = 256;
 		features->pressure_fuzz = 16;
+		features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES;
 	}
 }
 
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 816ab0f..22cafe2 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -40,6 +40,7 @@
 
 /* device quirks */
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
+#define WACOM_QUIRK_BBTOUCH_LOWRES	0x0002
 
 /* largest reported tracking id */
 #define MAX_TRACKING_ID			0xfff
-- 
1.7.1


  parent reply	other threads:[~2010-09-04 13:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-04 13:42 [PATCH 0/5] input: wacom: Initial support for Bamboo (rev3) Henrik Rydberg
2010-09-04 13:42 ` [PATCH 1/5] input: wacom: Add fuzz parameters to features Henrik Rydberg
2010-09-04 13:43 ` [PATCH 2/5] input: wacom: Parse the Bamboo device family Henrik Rydberg
2010-09-04 13:43 ` [PATCH 3/5] input: wacom: Collect device quirks into single function (rev2) Henrik Rydberg
2010-09-04 13:43 ` [PATCH 4/5] input: wacom: Add support for the Bamboo Touch trackpad (rev4) Henrik Rydberg
2010-09-05 10:04   ` Henrik Rydberg
2010-09-05 20:03     ` Dmitry Torokhov
2010-09-04 13:43 ` Henrik Rydberg [this message]
2010-09-04 21:24 ` [PATCH 0/5] input: wacom: Initial support for Bamboo (rev3) Ping Cheng
2010-09-05 14:28   ` Chris Bagwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1283607783-29388-6-git-send-email-rydberg@euromail.se \
    --to=rydberg@euromail.se \
    --cc=chris@cnpbagwell.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pingc@wacom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®