From: Joerg Roedel <joerg.roedel@amd.com>
To: Avi Kivity <avi@redhat.com>, Marcelo Tosatti <mtosatti@redhat.com>
Cc: <"http://kvm.qumranet.com"@osrc.amd.com>,
<linux-kernel@vger.kernel.org>,
Joerg Roedel <joerg.roedel@amd.com>
Subject: [PATCH 16/27] KVM: MMU: Introduce init_kvm_nested_mmu()
Date: Mon, 6 Sep 2010 17:01:51 +0200 [thread overview]
Message-ID: <1283785322-26898-17-git-send-email-joerg.roedel@amd.com> (raw)
In-Reply-To: <1283785322-26898-1-git-send-email-joerg.roedel@amd.com>
This patch introduces the init_kvm_nested_mmu() function
which is used to re-initialize the nested mmu when the l2
guest changes its paging mode.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/mmu.c | 34 +++++++++++++++++++++++++++++++++-
arch/x86/kvm/mmu.h | 1 +
arch/x86/kvm/x86.c | 20 ++++++++++++++++++++
4 files changed, 55 insertions(+), 1 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 38dc82e..a338235 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -805,3 +805,4 @@ void kvm_set_shared_msr(unsigned index, u64 val, u64 mask);
bool kvm_is_linear_rip(struct kvm_vcpu *vcpu, unsigned long linear_rip);
#endif /* _ASM_X86_KVM_HOST_H */
+
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 1f425f3..7bc8d67 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2784,11 +2784,43 @@ static int init_kvm_softmmu(struct kvm_vcpu *vcpu)
return r;
}
+static int init_kvm_nested_mmu(struct kvm_vcpu *vcpu)
+{
+ struct kvm_mmu *g_context = &vcpu->arch.nested_mmu;
+
+ g_context->get_cr3 = get_cr3;
+ g_context->inject_page_fault = kvm_inject_page_fault;
+
+ /*
+ * Note that arch.mmu.gva_to_gpa translates l2_gva to l1_gpa. The
+ * translation of l2_gpa to l1_gpa addresses is done using the
+ * arch.nested_mmu.gva_to_gpa function. Basically the gva_to_gpa
+ * functions between mmu and nested_mmu are swapped.
+ */
+ if (!is_paging(vcpu)) {
+ g_context->root_level = 0;
+ g_context->gva_to_gpa = nonpaging_gva_to_gpa_nested;
+ } else if (is_long_mode(vcpu)) {
+ g_context->root_level = PT64_ROOT_LEVEL;
+ g_context->gva_to_gpa = paging64_gva_to_gpa_nested;
+ } else if (is_pae(vcpu)) {
+ g_context->root_level = PT32E_ROOT_LEVEL;
+ g_context->gva_to_gpa = paging64_gva_to_gpa_nested;
+ } else {
+ g_context->root_level = PT32_ROOT_LEVEL;
+ g_context->gva_to_gpa = paging32_gva_to_gpa_nested;
+ }
+
+ return 0;
+}
+
static int init_kvm_mmu(struct kvm_vcpu *vcpu)
{
vcpu->arch.update_pte.pfn = bad_pfn;
- if (tdp_enabled)
+ if (mmu_is_nested(vcpu))
+ return init_kvm_nested_mmu(vcpu);
+ else if (tdp_enabled)
return init_kvm_tdp_mmu(vcpu);
else
return init_kvm_softmmu(vcpu);
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 7086ca8..513abbb 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -47,6 +47,7 @@
#define PFERR_USER_MASK (1U << 2)
#define PFERR_RSVD_MASK (1U << 3)
#define PFERR_FETCH_MASK (1U << 4)
+#define PFERR_NESTED_MASK (1U << 31)
int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4]);
int kvm_init_shadow_mmu(struct kvm_vcpu *vcpu, struct kvm_mmu *context);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 1f5db75..b2fe9e7 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3476,6 +3476,25 @@ static gpa_t translate_gpa(struct kvm_vcpu *vcpu, gpa_t gpa, u32 *error)
return gpa;
}
+static gpa_t translate_nested_gpa(struct kvm_vcpu *vcpu, gpa_t gpa, u32 *error)
+{
+ gpa_t t_gpa;
+ u32 access;
+ u32 err;
+
+ BUG_ON(!mmu_is_nested(vcpu));
+
+ /* NPT walks are treated as user writes */
+ access = PFERR_WRITE_MASK | PFERR_USER_MASK;
+ t_gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gpa, access, &err);
+ if (t_gpa == UNMAPPED_GVA) {
+ vcpu->arch.fault.address = gpa;
+ vcpu->arch.fault.error_code = err | PFERR_NESTED_MASK;
+ }
+
+ return t_gpa;
+}
+
gpa_t kvm_mmu_gva_to_gpa_read(struct kvm_vcpu *vcpu, gva_t gva, u32 *error)
{
u32 access = (kvm_x86_ops->get_cpl(vcpu) == 3) ? PFERR_USER_MASK : 0;
@@ -5691,6 +5710,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
vcpu->arch.walk_mmu = &vcpu->arch.mmu;
vcpu->arch.mmu.root_hpa = INVALID_PAGE;
vcpu->arch.mmu.translate_gpa = translate_gpa;
+ vcpu->arch.nested_mmu.translate_gpa = translate_nested_gpa;
if (!irqchip_in_kernel(kvm) || kvm_vcpu_is_bsp(vcpu))
vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
else
--
1.7.0.4
next prev parent reply other threads:[~2010-09-06 15:03 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-06 15:01 [PATCH 0/27] Nested Paging Virtualization for KVM v3 Joerg Roedel
2010-09-06 15:01 ` [PATCH 01/27] KVM: MMU: Check for root_level instead of long mode Joerg Roedel
2010-09-06 15:01 ` [PATCH 02/27] KVM: MMU: Make tdp_enabled a mmu-context parameter Joerg Roedel
2010-09-06 15:01 ` [PATCH 03/27] KVM: MMU: Make set_cr3 a function pointer in kvm_mmu Joerg Roedel
2010-09-06 15:01 ` [PATCH 04/27] KVM: X86: Introduce a tdp_set_cr3 function Joerg Roedel
2010-09-06 15:01 ` [PATCH 05/27] KVM: MMU: Introduce get_cr3 function pointer Joerg Roedel
2010-09-06 15:01 ` [PATCH 06/27] KVM: MMU: Introduce inject_page_fault " Joerg Roedel
2010-09-06 15:01 ` [PATCH 07/27] KVM: MMU: Introduce kvm_init_shadow_mmu helper function Joerg Roedel
2010-09-06 15:01 ` [PATCH 08/27] KVM: MMU: Let is_rsvd_bits_set take mmu context instead of vcpu Joerg Roedel
2010-09-06 15:01 ` [PATCH 09/27] KVM: MMU: Introduce generic walk_addr function Joerg Roedel
2010-09-06 15:01 ` [PATCH 10/27] KVM: MMU: Add infrastructure for two-level page walker Joerg Roedel
2010-09-06 15:01 ` [PATCH 11/27] KVM: X86: Introduce pointer to mmu context used for gva_to_gpa Joerg Roedel
2010-09-06 15:01 ` [PATCH 12/27] KVM: MMU: Implement nested gva_to_gpa functions Joerg Roedel
2010-09-06 15:01 ` [PATCH 13/27] KVM: X86: Add kvm_read_guest_page_tdp function Joerg Roedel
2010-09-06 15:01 ` [PATCH 14/27] KVM: MMU: Make walk_addr_generic capable for two-level walking Joerg Roedel
2010-09-06 15:01 ` [PATCH 15/27] KVM: MMU: Introduce kvm_read_guest_page_x86() Joerg Roedel
2010-09-06 15:01 ` Joerg Roedel [this message]
2010-09-06 15:01 ` [PATCH 17/27] KVM: MMU: Track page fault data in struct vcpu Joerg Roedel
2010-09-06 15:01 ` [PATCH 18/27] KVM: MMU: Propagate the right fault back to the guest after gva_to_gpa Joerg Roedel
2010-09-06 15:01 ` [PATCH 19/27] KVM: X86: Propagate fetch faults Joerg Roedel
2010-09-06 15:01 ` [PATCH 20/27] KVM: MMU: Add kvm_mmu parameter to load_pdptrs function Joerg Roedel
2010-09-06 15:01 ` [PATCH 21/27] KVM: MMU: Introduce kvm_pdptr_read_mmu Joerg Roedel
2010-09-06 15:01 ` [PATCH 22/27] KVM: MMU: Refactor mmu_alloc_roots function Joerg Roedel
2010-09-06 15:01 ` [PATCH 23/27] KVM: MMU: Allow long mode shadows for legacy page tables Joerg Roedel
2010-09-06 15:01 ` [PATCH 24/27] KVM: SVM: Implement MMU helper functions for Nested Nested Paging Joerg Roedel
2010-09-06 15:02 ` [PATCH 25/27] KVM: SVM: Initialize Nested Nested MMU context on VMRUN Joerg Roedel
2010-09-06 15:02 ` [PATCH 26/27] KVM: SVM: Expect two more candiates for exit_int_info Joerg Roedel
2010-09-06 15:02 ` [PATCH 27/27] KVM: SVM: Report Nested Paging support to userspace Joerg Roedel
2010-09-06 15:55 [PATCH 0/27] Nested Paging Virtualization for KVM v3 (now with fixed Cc-List) Joerg Roedel
2010-09-06 15:55 ` [PATCH 16/27] KVM: MMU: Introduce init_kvm_nested_mmu() Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1283785322-26898-17-git-send-email-joerg.roedel@amd.com \
--to=joerg.roedel@amd.com \
--cc="http://kvm.qumranet.com"@osrc.amd.com \
--cc=avi@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®