mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nikunj Kela <quic_nkela@quicinc.com>
To: Florian Fainelli <f.fainelli@gmail.com>,
	Sudeep Holla <sudeep.holla@arm.com>
Cc: <cristian.marussi@arm.com>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 2/2] firmware: arm_scmi: Augment SMC/HVC to allow optional parameter
Date: Tue, 18 Apr 2023 10:07:17 -0700	[thread overview]
Message-ID: <12846dc1-38b6-892a-3189-25db866fa38e@quicinc.com> (raw)
In-Reply-To: <40e91346-19d7-c0b4-7fcc-d5a2081fe8dd@gmail.com>


On 4/18/2023 9:33 AM, Florian Fainelli wrote:
> On 4/18/23 07:20, Nikunj Kela wrote:
>>
>> On 4/18/2023 2:58 AM, Sudeep Holla wrote:
>>> On Mon, Apr 17, 2023 at 11:01:13AM -0700, Florian Fainelli wrote:
>>>> On 4/17/23 10:44, Nikunj Kela wrote:
>>>>> This patch add support for passing shmem channel address as parameter
>>>>> in smc/hvc call. This patch is useful when multiple scmi instances 
>>>>> are
>>>>> using same smc-id and firmware needs to distiguish among the 
>>>>> instances.
>>>> Typo: distinguish.
>>>>
>>>> It really would have been a lot clearer and made a whole lot more 
>>>> sense to
>>>> encode a VM ID/channel number within some of the SMCCC parameters, 
>>>> possibly
>>>> as part of the function ID itself.
>>>>
>>> Yes I was about to suggest this but then remembered one main reason 
>>> I have
>>> been given in the past against that:
>>> If the system launches high number of VMs then that means loads of FID
>>> needs to be reserved for SCMI and the hypervisor needs to support it.
>>> Basically it is not scalable which I agree but not sure if such large
>>> number of VMs are used in reality with SCMI. But I agree with the 
>>> technical
>>> reasoning.
>>>
>>> The other reason why I preferred the shmem address itself instead of 
>>> some
>>> custom VM ID/channel number is that it can easily becomes vendor 
>>> specific
>>> for no real good reason and then we need to add support for each such
>>> different parameters. Nikunj suggested getting them from DT which I 
>>> really
>>> don't like if the sole reason is just to identify the channel. We don't
>>> have standard SCMI SMC/HVC but allowing such deviations with params 
>>> from
>>> DT will just explode with various combinations for silly/no reason.
>>>
>> Would you be ok to pass the smc/hvc parameters via kernel parameters 
>> in commandline? If so, I can implement that. I just wanted to keep 
>> everything in one place hence suggested using DTB node.
>
> Command line arguments seem a bit unnecessary here and it would force 
> you to invent a scheme to control per SCMI device/instance parameters.
>
Agreed!
>>
>>> [...]
>>>
>>>>> @@ -137,6 +144,8 @@ static int smc_chan_setup(struct 
>>>>> scmi_chan_info *cinfo, struct device *dev,
>>>>>        if (ret < 0)
>>>>>            return ret;
>>>>> +    if (of_device_is_compatible(dev->of_node, "arm,scmi-smc-param"))
>>>>> +        scmi_info->param = res.start;
>>>> There is not even a check that this is going to be part of the 
>>>> kernel's view
>>>> of memory, that seems a bit brittle and possibly a security hole, 
>>>> too. Your
>>>> hypervisor presumably needs to have carved out some amount of 
>>>> memory in
>>>> order for the messages to be written to/read from, and so would the VM
>>>> kernel, so eventually we should have a 'reserved-memory' entry of 
>>>> some sort,
>>>> no?
>>>>
>>> Not disagreeing here. Just checking if my understanding is correct 
>>> or not.
>>> IIUC, we need reserved-memory if it is part of the memory presented 
>>> to the
>>> OS right ? You don't need that if it is dedicated memory like part 
>>> of SRAM
>>> or something similar.
>> We are not using reserved-memory node. Instead using sram-mmio to 
>> carve out shmem for scmi instances.
>
> OK, that works too.
>
>>>>>        /*
>>>>>         * If there is an interrupt named "a2p", then the service and
>>>>>         * completion of a message is signaled by an interrupt 
>>>>> rather than by
>>>>> @@ -156,6 +165,7 @@ static int smc_chan_setup(struct 
>>>>> scmi_chan_info *cinfo, struct device *dev,
>>>>>        }
>>>>>        scmi_info->func_id = func_id;
>>>>> +    scmi_info->is_smc64 = ARM_SMCCC_IS_64(func_id);
>>>>>        scmi_info->cinfo = cinfo;
>>>>>        smc_channel_lock_init(scmi_info);
>>>>>        cinfo->transport_info = scmi_info;
>>>>> @@ -188,7 +198,20 @@ static int smc_send_message(struct 
>>>>> scmi_chan_info *cinfo,
>>>>>        shmem_tx_prepare(scmi_info->shmem, xfer, cinfo);
>>>>> -    arm_smccc_1_1_invoke(scmi_info->func_id, 0, 0, 0, 0, 0, 0, 0, 
>>>>> &res);
>>>>> +#ifdef CONFIG_ARM64
>>>>> +    /*
>>>>> +     * if SMC32 convention is used, pass 64 bit address in
>>>>> +     * two parameters
>>>>> +     */
>>>>> +    if (!scmi_info->is_smc64)
>>>> There is no need for scmi_info to store is_smc64, just check the 
>>>> func_id
>>>> here and declare is_smc64 as a local variable to the function.
>>>>
>>> +1
>> ACK!
>>>> Also, another way to approach this would be to encode the 
>>>> parameters region
>>>> in 4KB units such that event on a 32-bit system with LPAE you are 
>>>> guaranteed
>>>> to fit the region into a 32-bit unsigned long. AFAIR virtualization 
>>>> and LPAE
>>>> are indistinguishable on real CPUs?
>>>>
>>> Agree with the idea. But can a single 4kB be used for multiple shmem 
>>> across
>>> VMs ? IIUC the hypervisor can deal with that, so I prefer it if it 
>>> is possible
>>> practically.
>> We have multiple VMs and each VM has multiple instances. We will have 
>> quite a few domains and I am not sure if single page will suffice.
>
> I did not make myself clear enough, you can encode an offset into the 
> shared memory area, and however big that shared memory area will be, 
> that offset can be in a 4KB size. So for instance if you have your 
> MMIO SRAM at 0x8000_0000, the first VM can use 0x8000_0ffff, the 
> second VM can use 0x8000_1000 to 0x8000_1fff and so on and so forth.
>
> Even if you need more than 4KB per VM, you can put that information 
> into the two additional parameters you pass through the SMC/HVC call.

Okay. I will float another version, first parameter of smc/hvc call will 
be pfn and second the offset!


  reply	other threads:[~2023-04-18 17:08 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-09 18:19 [PATCH 0/2] Allow parameter in smc/hvc calls Nikunj Kela
2023-04-09 18:19 ` [PATCH 1/2] dt-bindings: firmware: arm,scmi: support parameter passing in smc/hvc Nikunj Kela
2023-04-10 17:20   ` Krzysztof Kozlowski
2023-04-10 17:33     ` Nikunj Kela
2023-04-11 17:17       ` Krzysztof Kozlowski
2023-04-09 18:19 ` [PATCH 2/2] firmware: arm_scmi: Augment SMC/HVC to allow optional parameters Nikunj Kela
2023-04-09 22:22   ` kernel test robot
2023-04-10 18:20 ` [PATCH v2 0/2] Allow parameter in smc/hvc calls Nikunj Kela
2023-04-10 18:20   ` [PATCH v2 1/2] dt-bindings: firmware: arm,scmi: support parameter passing in smc/hvc Nikunj Kela
2023-04-11 12:54     ` Sudeep Holla
2023-04-11 14:46       ` Nikunj Kela
2023-04-11 17:18     ` Krzysztof Kozlowski
2023-04-11 17:25       ` Nikunj Kela
2023-04-10 18:20   ` [PATCH v2 2/2] firmware: arm_scmi: Augment SMC/HVC to allow optional parameters Nikunj Kela
2023-04-11 13:01   ` [PATCH v2 0/2] Allow parameter in smc/hvc calls Sudeep Holla
2023-04-11 14:42     ` Nikunj Kela
2023-04-12  8:37       ` Sudeep Holla
2023-04-12 14:54         ` Nikunj Kela
2023-04-17 17:43 ` [PATCH v3 " Nikunj Kela
2023-04-17 17:44   ` [PATCH v3 1/2] dt-bindings: firmware: arm,scmi: support for parameter in smc/hvc call Nikunj Kela
2023-04-17 17:44   ` [PATCH v3 2/2] firmware: arm_scmi: Augment SMC/HVC to allow optional parameter Nikunj Kela
2023-04-17 18:01     ` Florian Fainelli
2023-04-17 18:17       ` Nikunj Kela
2023-04-18  9:58       ` Sudeep Holla
2023-04-18 14:20         ` Nikunj Kela
2023-04-18 16:33           ` Florian Fainelli
2023-04-18 17:07             ` Nikunj Kela [this message]
2023-04-18 18:56 ` [PATCH v4 0/2] Allow parameter in smc/hvc calls Nikunj Kela
2023-04-18 18:56   ` [PATCH v4 1/2] dt-bindings: firmware: arm,scmi: support for parameter in smc/hvc call Nikunj Kela
2023-04-25 16:50     ` Rob Herring
2023-04-18 18:56   ` [PATCH v4 2/2] firmware: arm_scmi: Augment SMC/HVC to allow optional parameters Nikunj Kela
2023-05-01 14:39     ` Nikunj Kela
2023-05-02 10:46       ` Sudeep Holla
2023-05-02 14:41         ` Nikunj Kela
2023-04-25 14:01   ` [PATCH v4 0/2] Allow parameter in smc/hvc calls Nikunj Kela

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=12846dc1-38b6-892a-3189-25db866fa38e@quicinc.com \
    --to=quic_nkela@quicinc.com \
    --cc=cristian.marussi@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®