From: Thomas Weber <weber@corscience.de>
To: trivial@kernel.org
Cc: linux-kernel@vger.kernel.org, Thomas Weber <weber@corscience.de>
Subject: [PATCH] Fix typo configue => configure in comments
Date: Wed, 22 Sep 2010 21:36:08 +0200 [thread overview]
Message-ID: <1285184168-28305-1-git-send-email-weber@corscience.de> (raw)
Signed-off-by: Thomas Weber <weber@corscience.de>
---
arch/mips/pci/fixup-fuloong2e.c | 2 +-
drivers/net/wireless/hostap/hostap_hw.c | 2 +-
net/irda/irnet/irnet_ppp.c | 2 +-
sound/soc/s3c24xx/neo1973_gta02_wm8753.c | 2 +-
sound/soc/s3c24xx/neo1973_wm8753.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c
index 4f6d8da..d5d4c01 100644
--- a/arch/mips/pci/fixup-fuloong2e.c
+++ b/arch/mips/pci/fixup-fuloong2e.c
@@ -52,7 +52,7 @@ static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
- /* Configues port 1, 2, 3, 4 to be validate*/
+ /* Configures port 1, 2, 3, 4 to be validate*/
pci_read_config_dword(pdev, 0xe0, &val);
pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index e9d9d62..b7cb165 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2621,7 +2621,7 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id)
iface = netdev_priv(dev);
local = iface->local;
- /* Detect early interrupt before driver is fully configued */
+ /* Detect early interrupt before driver is fully configured */
spin_lock(&local->irq_init_lock);
if (!dev->base_addr) {
if (net_ratelimit()) {
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index dfe7b38..36f43ca 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -663,7 +663,7 @@ dev_irnet_ioctl(
if((val == N_SYNC_PPP) || (val == N_PPP))
{
DEBUG(FS_INFO, "Entering PPP discipline.\n");
- /* PPP channel setup (ap->chan in configued in dev_irnet_open())*/
+ /* PPP channel setup (ap->chan in configured in dev_irnet_open())*/
lock_kernel();
err = ppp_register_channel(&ap->chan);
if(err == 0)
diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
index 209c259..4719558 100644
--- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
@@ -182,7 +182,7 @@ static int neo1973_gta02_voice_hw_params(
if (ret < 0)
return ret;
- /* configue and enable PLL for 12.288MHz output */
+ /* configure and enable PLL for 12.288MHz output */
ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
iis_clkrate / 4, 12288000);
if (ret < 0)
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 0cb4f86..4ac6209 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -201,7 +201,7 @@ static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
if (ret < 0)
return ret;
- /* configue and enable PLL for 12.288MHz output */
+ /* configure and enable PLL for 12.288MHz output */
ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
iis_clkrate / 4, 12288000);
if (ret < 0)
--
1.7.3
next reply other threads:[~2010-09-22 19:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-22 19:36 Thomas Weber [this message]
2010-09-22 19:48 ` David Miller
2010-09-23 9:47 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285184168-28305-1-git-send-email-weber@corscience.de \
--to=weber@corscience.de \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®