From: Huang Ying <ying.huang@intel.com>
To: Don Zickus <dzickus@redhat.com>, Ingo Molnar <mingo@elte.hu>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org, Andi Kleen <andi@firstfloor.org>,
Huang Ying <ying.huang@intel.com>
Subject: [PATCH -v2 7/7] x86, NMI, Remove do_nmi_callback logic
Date: Mon, 27 Sep 2010 08:57:06 +0800 [thread overview]
Message-ID: <1285549026-5008-7-git-send-email-ying.huang@intel.com> (raw)
In-Reply-To: <1285549026-5008-1-git-send-email-ying.huang@intel.com>
do_nmi_callback related logic is removed, because it is useless, just
adds code complexity.
unknown_nmi_panic sysctl is reserved to keep kernel ABI unchanged.
Signed-off-by: Huang Ying <ying.huang@intel.com>
---
arch/x86/include/asm/nmi.h | 10 +++++++++-
arch/x86/kernel/apic/hw_nmi.c | 1 -
arch/x86/kernel/apic/nmi.c | 29 +----------------------------
arch/x86/kernel/traps.c | 16 ++++++++++------
4 files changed, 20 insertions(+), 36 deletions(-)
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -30,9 +30,17 @@ extern void setup_apic_nmi_watchdog(void
extern void stop_apic_nmi_watchdog(void *);
extern void disable_timer_nmi_watchdog(void);
extern void enable_timer_nmi_watchdog(void);
-extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
extern void cpu_nmi_set_wd_enabled(void);
+#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_LOCKUP_DETECTOR)
+extern int nmi_watchdog_tick(struct pt_regs *regs);
+#else
+static inline int nmi_watchdog_tick(struct pt_regs *regs)
+{
+ return 0;
+}
+#endif
+
extern atomic_t nmi_active;
extern unsigned int nmi_watchdog;
#define NMI_NONE 0
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -100,7 +100,6 @@ void acpi_nmi_disable(void) { return; }
#endif
atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
EXPORT_SYMBOL(nmi_active);
-int unknown_nmi_panic;
void cpu_nmi_set_wd_enabled(void) { return; }
void stop_apic_nmi_watchdog(void *unused) { return; }
void setup_apic_nmi_watchdog(void *unused) { return; }
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -37,7 +37,6 @@
#include <asm/mach_traps.h>
-int unknown_nmi_panic;
int nmi_watchdog_enabled;
/* For reliability, we're prepared to waste bits here. */
@@ -389,7 +388,7 @@ void touch_nmi_watchdog(void)
EXPORT_SYMBOL(touch_nmi_watchdog);
notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
+nmi_watchdog_tick(struct pt_regs *regs)
{
/*
* Since current_thread_info()-> is always on the stack, and we
@@ -483,23 +482,6 @@ static void disable_ioapic_nmi_watchdog(
on_each_cpu(stop_apic_nmi_watchdog, NULL, 1);
}
-static int __init setup_unknown_nmi_panic(char *str)
-{
- unknown_nmi_panic = 1;
- return 1;
-}
-__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
- unsigned char reason = get_nmi_reason();
- char buf[64];
-
- sprintf(buf, "NMI received for unknown reason %02x\n", reason);
- die_nmi(buf, regs, 1); /* Always panic here */
- return 0;
-}
-
/*
* proc handler for /proc/sys/kernel/nmi
*/
@@ -540,15 +522,6 @@ int proc_nmi_enabled(struct ctl_table *t
#endif /* CONFIG_SYSCTL */
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
- if (unknown_nmi_panic)
- return unknown_nmi_panic_callback(regs, cpu);
-#endif
- return 0;
-}
-
void arch_trigger_all_cpu_backtrace(void)
{
int i;
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -84,6 +84,7 @@ EXPORT_SYMBOL_GPL(used_vectors);
static int ignore_nmis;
int unknown_nmi_for_hwerr;
+int unknown_nmi_panic;
/*
* Prevent NMI reason port (0x61) being accessed simultaneously, can
@@ -308,6 +309,13 @@ gp_in_kernel:
die("general protection fault", regs, error_code);
}
+static int __init setup_unknown_nmi_panic(char *str)
+{
+ unknown_nmi_panic = 1;
+ return 1;
+}
+__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
+
static notrace __kprobes void
pci_serr_error(unsigned char reason, struct pt_regs *regs)
{
@@ -385,7 +393,7 @@ unknown_nmi_error(unsigned char reason,
reason, smp_processor_id());
printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
- if (panic_on_unrecovered_nmi)
+ if (unknown_nmi_panic || panic_on_unrecovered_nmi)
panic("NMI: Not continuing");
printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
@@ -432,12 +440,8 @@ static notrace __kprobes void default_do
}
raw_spin_unlock(&nmi_reason_lock);
-#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_LOCKUP_DETECTOR)
- if (nmi_watchdog_tick(regs, reason))
- return;
- if (do_nmi_callback(regs, smp_processor_id()))
+ if (nmi_watchdog_tick(regs))
return;
-#endif
if (notify_die(DIE_NMIUNKNOWN, "nmi_unknown", regs, reason, 2, SIGINT)
== NOTIFY_STOP)
next prev parent reply other threads:[~2010-09-27 0:57 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-27 0:57 [PATCH -v2 1/7] x86, NMI, Add symbol definition for NMI magic constants Huang Ying
2010-09-27 0:57 ` [PATCH -v2 2/7] x86, NMI, Add touch_nmi_watchdog to io_check_error delay Huang Ying
2010-09-27 0:57 ` [PATCH -v2 3/7] x86, NMI, Rename memory parity error to PCI SERR error Huang Ying
2010-09-27 8:01 ` Robert Richter
2010-09-27 8:39 ` Huang Ying
2010-09-27 9:00 ` Robert Richter
2010-09-27 15:33 ` Don Zickus
2010-09-27 16:45 ` Robert Richter
2010-09-27 17:50 ` Don Zickus
2010-09-28 1:33 ` Huang Ying
2010-09-28 14:29 ` Robert Richter
2010-09-29 7:56 ` huang ying
2010-09-28 15:38 ` Don Zickus
2010-09-28 1:22 ` Huang Ying
2010-09-27 0:57 ` [PATCH -v2 4/7] x86, NMI, Rewrite NMI handler Huang Ying
2010-09-27 9:41 ` Robert Richter
2010-09-27 12:39 ` huang ying
2010-09-27 13:25 ` Robert Richter
2010-09-27 15:29 ` Don Zickus
2010-09-27 17:40 ` Robert Richter
2010-09-27 19:14 ` Don Zickus
2010-09-27 22:35 ` Robert Richter
2010-09-28 1:03 ` Huang Ying
2010-09-28 14:59 ` Robert Richter
2010-09-29 7:54 ` huang ying
2010-09-27 0:57 ` [PATCH -v2 5/7] Make NMI reason io port (0x61) can be processed on any CPU Huang Ying
2010-09-27 0:57 ` [PATCH -v2 6/7] x86, NMI, Add support to notify hardware error with unknown NMI Huang Ying
2010-09-27 10:09 ` Robert Richter
2010-09-27 12:47 ` huang ying
2010-09-27 13:38 ` Robert Richter
2010-09-27 15:20 ` Don Zickus
2010-09-28 0:36 ` Huang Ying
2010-09-28 15:32 ` Don Zickus
2010-09-29 8:17 ` huang ying
2010-09-30 4:36 ` Don Zickus
2010-09-30 4:57 ` Huang Ying
2010-09-30 8:38 ` Robert Richter
2010-09-30 9:36 ` huang ying
2010-09-30 9:51 ` Andi Kleen
2010-10-01 20:00 ` Maciej W. Rozycki
2010-09-30 8:25 ` Andi Kleen
2010-09-28 1:19 ` Huang Ying
2010-09-28 15:27 ` Robert Richter
2010-09-29 8:07 ` huang ying
2010-09-27 15:38 ` Don Zickus
2010-09-28 1:54 ` Huang Ying
2010-09-27 0:57 ` Huang Ying [this message]
2010-09-27 10:44 ` [PATCH -v2 7/7] x86, NMI, Remove do_nmi_callback logic Robert Richter
2010-09-27 12:56 ` huang ying
2010-09-27 13:43 ` Robert Richter
2010-09-27 15:16 ` Don Zickus
2010-09-27 16:58 ` Robert Richter
2010-09-28 1:41 ` Huang Ying
2010-09-28 15:16 ` Robert Richter
2010-09-28 15:21 ` Don Zickus
2010-09-28 0:28 ` Huang Ying
2010-09-28 15:19 ` Don Zickus
2010-09-29 6:55 ` huang ying
2010-09-30 4:04 ` Don Zickus
2010-09-30 5:21 ` Huang Ying
2010-09-30 8:24 ` Andi Kleen
2010-09-30 8:23 ` Robert Richter
2010-09-27 10:50 ` [PATCH -v2 1/7] x86, NMI, Add symbol definition for NMI magic constants Robert Richter
2010-09-27 15:29 ` Don Zickus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285549026-5008-7-git-send-email-ying.huang@intel.com \
--to=ying.huang@intel.com \
--cc=andi@firstfloor.org \
--cc=dzickus@redhat.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®