mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Huang Ying <ying.huang@intel.com>
To: Don Zickus <dzickus@redhat.com>, Ingo Molnar <mingo@elte.hu>,
	"H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org, Andi Kleen <andi@firstfloor.org>,
	Robert Richter <robert.richter@amd.com>,
	Huang Ying <ying.huang@intel.com>
Subject: [PATCH -v3 5/6] x86, NMI, treat unknown NMI as hardware error
Date: Sat,  9 Oct 2010 14:49:46 +0800	[thread overview]
Message-ID: <1286606987-19879-5-git-send-email-ying.huang@intel.com> (raw)
In-Reply-To: <1286606987-19879-1-git-send-email-ying.huang@intel.com>

In general, unknown NMI is used by hardware and firmware to notify
fatal hardware errors to OS. So the Linux should treat unknown NMI as
hardware error and go panic upon unknown NMI for better error
containment.

But there are some broken hardware, which will generate unknown NMI
not for hardware error. To support these machines, a white list
mechanism is provided to treat unknown NMI as hardware error only on
some known working system.

These systems are identified via the presentation of APEI HEST or
some PCI ID of the host bridge. The PCI ID of host bridge instead of
DMI ID is used, so that the checking can be done based on the platform
type instead of motherboard. This should be simpler and sufficient.

The method to identify the platforms is designed by Andi Kleen.


v3:

- Change document and comments

Signed-off-by: Huang Ying <ying.huang@intel.com>
---
 arch/x86/include/asm/nmi.h |    1 
 arch/x86/kernel/Makefile   |    2 +
 arch/x86/kernel/hwerr.c    |   62 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/traps.c    |   11 +++++++
 drivers/acpi/apei/hest.c   |    8 +++++
 5 files changed, 84 insertions(+)
 create mode 100644 arch/x86/kernel/hwerr.c

--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -44,6 +44,7 @@ struct ctl_table;
 extern int proc_nmi_enabled(struct ctl_table *, int ,
 			void __user *, size_t *, loff_t *);
 extern int unknown_nmi_panic;
+extern int unknown_nmi_as_hwerr;
 
 void arch_trigger_all_cpu_backtrace(void);
 #define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -119,6 +119,8 @@ obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION)
 
 obj-$(CONFIG_SWIOTLB)			+= pci-swiotlb.o
 
+obj-y					+= hwerr.o
+
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
--- /dev/null
+++ b/arch/x86/kernel/hwerr.c
@@ -0,0 +1,62 @@
+/*
+ * Hardware error architecture dependent processing
+ *
+ * Copyright 2010 Intel Corp.
+ *   Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/nmi.h>
+
+/*
+ * In general, unknown NMI is used by hardware and firmware to notify
+ * fatal hardware errors to OS. So the Linux should treat unknown NMI
+ * as hardware error and go panic upon unknown NMI for better error
+ * containment.
+ *
+ * But there are some broken hardware, which will generate unknown NMI
+ * not for hardware error. To support these systems, a white list
+ * mechanism is used to treat unknown NMI as hardware error only on
+ * some known working system.
+ *
+ * The PCI ID of host bridge instead of DMI ID is used, so that the
+ * checking can be done based on the platform instead of motherboard.
+ * This should be simpler and sufficient.
+ */
+static const
+struct pci_device_id unknown_nmi_as_hwerr_platform[] __initdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3406) },
+	{ 0, }
+};
+
+int __init check_unknown_nmi_as_hwerr(void)
+{
+	struct pci_dev *dev = NULL;
+
+	for_each_pci_dev(dev) {
+		if (pci_match_id(unknown_nmi_as_hwerr_platform, dev)) {
+			pr_info(
+"Host bridge is identified, will treat unknown NMI as hardware error!\n");
+			unknown_nmi_as_hwerr = 1;
+			break;
+		}
+	}
+
+	return 0;
+}
+late_initcall(check_unknown_nmi_as_hwerr);
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -83,6 +83,8 @@ EXPORT_SYMBOL_GPL(used_vectors);
 
 static int ignore_nmis;
 
+int unknown_nmi_as_hwerr;
+
 /*
  * Prevent NMI reason port (0x61) being accessed simultaneously, can
  * only be used in NMI handler.
@@ -366,6 +368,15 @@ unknown_nmi_error(unsigned char reason,
 	if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) ==
 			NOTIFY_STOP)
 		return;
+	/*
+	 * On some platforms, hardware errors may be notified via
+	 * unknown NMI
+	 */
+	if (unknown_nmi_as_hwerr)
+		panic(
+		"NMI for hardware error without error record: Not continuing\n"
+		"Please check BIOS/BMC log for further information.");
+
 #ifdef CONFIG_MCA
 	/*
 	 * Might actually be able to figure out what the guilty party
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -35,6 +35,7 @@
 #include <linux/highmem.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/nmi.h>
 #include <acpi/apei.h>
 
 #include "apei-internal.h"
@@ -225,6 +226,13 @@ static int __init hest_init(void)
 	if (rc)
 		goto err;
 
+	/*
+	 * System has proper HEST should treat unknown NMI as fatal
+	 * hardware error notification
+	 */
+	pr_info("HEST is valid, will treat unknown NMI as hardware error!\n");
+	unknown_nmi_as_hwerr = 1;
+
 	rc = hest_ghes_dev_register(ghes_count);
 	if (rc)
 		goto err;

  parent reply	other threads:[~2010-10-09  6:50 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-09  6:49 [PATCH -v3 1/6] x86, NMI, Add NMI symbol constants and rename memory parity to PCI SERR Huang Ying
2010-10-09  6:49 ` [PATCH -v3 2/6] x86, NMI, Add touch_nmi_watchdog to io_check_error delay Huang Ying
2010-10-09  6:49 ` [PATCH -v3 3/6] x86, NMI, Rewrite NMI handler Huang Ying
2010-10-11 16:13   ` Peter Zijlstra
2010-10-11 20:35     ` Don Zickus
2010-10-12  0:50     ` Huang Ying
2010-10-12  6:04       ` Peter Zijlstra
2010-10-12  6:14         ` Huang Ying
2010-10-12  6:31           ` Peter Zijlstra
2010-10-12  6:37             ` Huang Ying
2010-10-12  6:40               ` Peter Zijlstra
2010-10-12  6:45                 ` Huang Ying
2010-10-12  6:49                   ` Peter Zijlstra
2010-10-12  6:54                     ` Huang Ying
2010-10-12 13:51                     ` Andi Kleen
2010-10-12 14:15                       ` Peter Zijlstra
2010-10-27 16:45                         ` Don Zickus
2010-10-27 17:08                           ` Peter Zijlstra
2010-10-27 18:07                             ` Don Zickus
2010-11-02 17:50                             ` Don Zickus
2010-11-02 18:16                               ` Huang Ying
2010-11-02 19:11                                 ` Don Zickus
2010-11-02 20:47                                 ` Don Zickus
2010-10-09  6:49 ` [PATCH -v3 4/6] Make NMI reason io port (0x61) can be processed on any CPU Huang Ying
2010-10-09  6:49 ` Huang Ying [this message]
2010-10-10 14:07   ` [PATCH -v3 5/6] x86, NMI, treat unknown NMI as hardware error Alan Cox
2010-10-10 14:13     ` Andi Kleen
2010-10-11 21:08       ` Don Zickus
2010-10-11 21:12         ` Don Zickus
2010-10-11 21:20   ` Don Zickus
2010-10-12  1:10     ` Huang Ying
2010-10-20  6:12     ` Huang Ying
2010-10-20 14:15       ` Don Zickus
2010-10-21  1:14         ` Huang Ying
2010-10-21  2:31           ` Don Zickus
2010-10-21  5:17             ` Huang Ying
2010-10-21 14:10               ` Don Zickus
2010-10-21 15:45                 ` Andi Kleen
2010-10-22  1:49                   ` Don Zickus
2010-10-22  2:05                     ` Huang Ying
2010-10-22  2:56                       ` Don Zickus
2010-10-22  5:23                         ` Huang Ying
2010-10-22  9:24                     ` Andi Kleen
2010-10-09  6:49 ` [PATCH -v3 6/6] x86, NMI, Remove do_nmi_callback logic Huang Ying

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1286606987-19879-5-git-send-email-ying.huang@intel.com \
    --to=ying.huang@intel.com \
    --cc=andi@firstfloor.org \
    --cc=dzickus@redhat.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=robert.richter@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®