From: Joe Perches <joe@perches.com>
To: Mike Frysinger <vapier@gentoo.org>
Cc: uclinux-dist-devel <uclinux-dist-devel@blackfin.uclinux.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH] arch/blackfin/kernel/module.c: Use more standard pr_fmt
Date: Wed, 20 Oct 2010 11:11:51 -0700 [thread overview]
Message-ID: <1287598311.1813.225.camel@Joe-Laptop> (raw)
Changed pr_fmt(fmt) to make the format arguments match the format.
Changed an argument name in apply_relocate from me to mod
so that the pr_err is consistent with the other uses.
Added missing '\n' to a format.
Uncompiled/untested.
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/blackfin/kernel/module.c | 49 ++++++++++++++++------------------------
1 files changed, 20 insertions(+), 29 deletions(-)
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index a6dfa6b..33b3a95 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -4,7 +4,7 @@
* Licensed under the GPL-2 or later
*/
-#define pr_fmt(fmt) "module %s: " fmt
+#define pr_fmt(fmt) "module %s: " fmt, mod->name
#include <linux/moduleloader.h>
#include <linux/elf.h>
@@ -57,8 +57,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_inst_sram_alloc(s->sh_size);
mod->arch.text_l1 = dest;
if (dest == NULL) {
- pr_err("L1 inst memory allocation failed\n",
- mod->name);
+ pr_err("L1 inst memory allocation failed\n");
return -1;
}
dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -70,8 +69,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_data_sram_alloc(s->sh_size);
mod->arch.data_a_l1 = dest;
if (dest == NULL) {
- pr_err("L1 data memory allocation failed\n",
- mod->name);
+ pr_err("L1 data memory allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -83,8 +81,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_data_sram_zalloc(s->sh_size);
mod->arch.bss_a_l1 = dest;
if (dest == NULL) {
- pr_err("L1 data memory allocation failed\n",
- mod->name);
+ pr_err("L1 data memory allocation failed\n");
return -1;
}
@@ -93,8 +90,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_data_B_sram_alloc(s->sh_size);
mod->arch.data_b_l1 = dest;
if (dest == NULL) {
- pr_err("L1 data memory allocation failed\n",
- mod->name);
+ pr_err("L1 data memory allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -104,8 +100,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_data_B_sram_alloc(s->sh_size);
mod->arch.bss_b_l1 = dest;
if (dest == NULL) {
- pr_err("L1 data memory allocation failed\n",
- mod->name);
+ pr_err("L1 data memory allocation failed\n");
return -1;
}
memset(dest, 0, s->sh_size);
@@ -117,8 +112,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l2_sram_alloc(s->sh_size);
mod->arch.text_l2 = dest;
if (dest == NULL) {
- pr_err("L2 SRAM allocation failed\n",
- mod->name);
+ pr_err("L2 SRAM allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -130,8 +124,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l2_sram_alloc(s->sh_size);
mod->arch.data_l2 = dest;
if (dest == NULL) {
- pr_err("L2 SRAM allocation failed\n",
- mod->name);
+ pr_err("L2 SRAM allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -143,8 +136,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l2_sram_zalloc(s->sh_size);
mod->arch.bss_l2 = dest;
if (dest == NULL) {
- pr_err("L2 SRAM allocation failed\n",
- mod->name);
+ pr_err("L2 SRAM allocation failed\n");
return -1;
}
@@ -160,9 +152,9 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
int
apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
- unsigned int symindex, unsigned int relsec, struct module *me)
+ unsigned int symindex, unsigned int relsec, struct module *mod)
{
- pr_err(".rel unsupported\n", me->name);
+ pr_err(".rel unsupported\n");
return -ENOEXEC;
}
@@ -186,8 +178,8 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
Elf32_Sym *sym;
unsigned long location, value, size;
- pr_debug("applying relocate section %u to %u\n", mod->name,
- relsec, sechdrs[relsec].sh_info);
+ pr_debug("applying relocate section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
@@ -203,14 +195,14 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
#ifdef CONFIG_SMP
if (location >= COREB_L1_DATA_A_START) {
- pr_err("cannot relocate in L1: %u (SMP kernel)",
- mod->name, ELF32_R_TYPE(rel[i].r_info));
+ pr_err("cannot relocate in L1: %u (SMP kernel)\n",
+ ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
#endif
pr_debug("location is %lx, value is %lx type is %d\n",
- mod->name, location, value, ELF32_R_TYPE(rel[i].r_info));
+ location, value, ELF32_R_TYPE(rel[i].r_info));
switch (ELF32_R_TYPE(rel[i].r_info)) {
@@ -230,12 +222,12 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
case R_BFIN_PCREL12_JUMP_S:
case R_BFIN_PCREL10:
pr_err("unsupported relocation: %u (no -mlong-calls?)\n",
- mod->name, ELF32_R_TYPE(rel[i].r_info));
+ ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
default:
- pr_err("unknown relocation: %u\n", mod->name,
- ELF32_R_TYPE(rel[i].r_info));
+ pr_err("unknown relocation: %u\n",
+ ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
@@ -251,8 +243,7 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
isram_memcpy((void *)location, &value, size);
break;
default:
- pr_err("invalid relocation for %#lx\n",
- mod->name, location);
+ pr_err("invalid relocation for %#lx\n", location);
return -ENOEXEC;
}
}
next reply other threads:[~2010-10-20 18:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-20 18:11 Joe Perches [this message]
2011-03-24 6:51 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287598311.1813.225.camel@Joe-Laptop \
--to=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
--cc=vapier@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®