From: Cyril Chemparathy <cyril@ti.com>
To: davinci-linux-open-source@linux.davincidsp.com,
spi-devel-general@lists.sourceforge.net,
broonie@opensource.wolfsonmicro.com, lrg@slimlogic.co.uk,
dbrownell@users.sourceforge.net, grant.likely@secretlab.ca,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, rpurdie@rpsys.net
Cc: Cyril Chemparathy <cyril@ti.com>
Subject: [PATCH v3 07/12] davinci: add tnetv107x evm regulators
Date: Thu, 21 Oct 2010 17:01:08 -0400 [thread overview]
Message-ID: <1287694873-12904-8-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1287694873-12904-1-git-send-email-cyril@ti.com>
This patch adds regulator and spi board info definitions for the tps6524x
power management IC found on tnetv107x evm boards.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
---
arch/arm/mach-davinci/board-tnetv107x-evm.c | 85 +++++++++++++++++++++++++++
1 files changed, 85 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index c37c5c6..d4c3d18 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -26,6 +26,9 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -257,7 +260,89 @@ static struct tnetv107x_device_info evm_device_info __initconst = {
.ssp_config = &ssp_config,
};
+static struct regulator_consumer_supply usb_consumers[] = {
+ REGULATOR_SUPPLY("vbus", "musb_hdrc.1"),
+};
+
+static struct regulator_consumer_supply lcd_consumers[] = {
+ REGULATOR_SUPPLY("vlcd", "tps6116x"),
+};
+
+static struct regulator_init_data regulators[] = {
+ {
+ .constraints = {
+ .name = "DCDC1",
+ .min_uV = 1000000,
+ .max_uV = 1000000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "DCDC2",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "DCDC3",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 4800000,
+ .max_uV = 4800000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .num_consumer_supplies = ARRAY_SIZE(usb_consumers),
+ .consumer_supplies = usb_consumers,
+ .constraints = {
+ .name = "USB",
+ .min_uA = 200000,
+ .max_uA = 1000000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT |
+ REGULATOR_CHANGE_STATUS,
+ },
+ },
+ {
+ .num_consumer_supplies = ARRAY_SIZE(lcd_consumers),
+ .consumer_supplies = lcd_consumers,
+ .constraints = {
+ .name = "LCD",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+};
+
static struct spi_board_info spi_info[] __initconst = {
+ {
+ .modalias = "tps6524x",
+ .bus_num = 1,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .platform_data = regulators,
+ },
};
static __init void tnetv107x_evm_board_init(void)
--
1.7.0.4
next prev parent reply other threads:[~2010-10-21 21:04 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-21 21:01 [PATCH v3 00/12] tnetv107x ssp driver stack Cyril Chemparathy
2010-10-21 21:01 ` [PATCH v3 01/12] misc: add driver for sequencer serial port Cyril Chemparathy
2010-10-21 23:12 ` Andrew Morton
2010-10-22 12:39 ` Cyril Chemparathy
2010-10-22 12:48 ` Arnd Bergmann
2010-10-22 19:33 ` Cyril Chemparathy
2010-10-22 22:46 ` Russell King - ARM Linux
2010-10-22 14:20 ` Alan Cox
2010-10-22 19:03 ` Cyril Chemparathy
2010-10-21 21:01 ` [PATCH v3 02/12] davinci: add tnetv107x ssp platform device Cyril Chemparathy
2010-10-21 21:01 ` [PATCH v3 03/12] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy
2010-10-21 21:01 ` [PATCH v3 04/12] spi: add ti-ssp spi master driver Cyril Chemparathy
2010-10-21 21:01 ` [PATCH v3 05/12] davinci: add spi devices on tnetv107x evm Cyril Chemparathy
2010-10-21 21:01 ` [PATCH v3 06/12] regulator: add driver for tps6524x regulator Cyril Chemparathy
2010-10-21 21:01 ` Cyril Chemparathy [this message]
2010-10-21 21:01 ` [PATCH v3 08/12] gpio: add ti-ssp virtual gpio driver Cyril Chemparathy
2010-10-21 21:01 ` [PATCH v3 09/12] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy
2010-10-21 21:01 ` [PATCH v3 10/12] backlight: add support for tps6116x controller Cyril Chemparathy
2010-10-21 21:19 ` Joe Perches
2010-10-21 21:01 ` [PATCH v3 11/12] davinci: add tnetv107x evm backlight device Cyril Chemparathy
2010-10-21 21:01 ` [PATCH v3 12/12] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy
2010-10-21 22:26 ` [PATCH v3 00/12] tnetv107x ssp driver stack Kevin Hilman
2010-10-21 22:59 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287694873-12904-8-git-send-email-cyril@ti.com \
--to=cyril@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=dbrownell@users.sourceforge.net \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
--cc=rpurdie@rpsys.net \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®