From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758730Ab0JVSXE (ORCPT ); Fri, 22 Oct 2010 14:23:04 -0400 Received: from kroah.org ([198.145.64.141]:41955 "EHLO coco.kroah.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758711Ab0JVSXB (ORCPT ); Fri, 22 Oct 2010 14:23:01 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Anton Vorontsov , Alan Cox , Greg Kroah-Hartman Subject: [PATCH 36/49] altera_uart: Add support for getting mapbase and IRQ from resources Date: Fri, 22 Oct 2010 11:21:15 -0700 Message-Id: <1287771688-14805-36-git-send-email-gregkh@suse.de> X-Mailer: git-send-email 1.7.1 In-Reply-To: <20101022175112.GC13489@kroah.com> References: <20101022175112.GC13489@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Anton Vorontsov This makes it much easier to integrate the driver with the rest of the Linux (e.g. MFD subsystem). The old method is still supported though. Also, from now on, there is one platform device per port (no changes are needed for the platform code, as no one registers the devices anywhere in-tree yet). Signed-off-by: Anton Vorontsov Acked-by: Tobias Klauser Cc: Alan Cox , Signed-off-by: Greg Kroah-Hartman --- drivers/serial/altera_uart.c | 60 ++++++++++++++++++++++++++--------------- 1 files changed, 38 insertions(+), 22 deletions(-) diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index 7dd58da..1dfeffa 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -498,38 +498,54 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) { struct altera_uart_platform_uart *platp = pdev->dev.platform_data; struct uart_port *port; - int i; + struct resource *res_mem; + struct resource *res_irq; + int i = pdev->id; - for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_uart_ports[i].port; + /* -1 emphasizes that the platform must have one port, no .N suffix */ + if (i == -1) + i = 0; - port->line = i; - port->type = PORT_ALTERA_UART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->uartclk = platp[i].uartclk; - port->ops = &altera_uart_ops; - port->flags = ASYNC_BOOT_AUTOCONF; + if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) + return -EINVAL; - uart_add_one_port(&altera_uart_driver, port); - } + port = &altera_uart_ports[i].port; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res_mem) + port->mapbase = res_mem->start; + else if (platp->mapbase) + port->mapbase = platp->mapbase; + else + return -EINVAL; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res_irq) + port->irq = res_irq->start; + else if (platp->irq) + port->irq = platp->irq; + + port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); + if (!port->membase) + return -ENOMEM; + + port->line = i; + port->type = PORT_ALTERA_UART; + port->iotype = SERIAL_IO_MEM; + port->uartclk = platp->uartclk; + port->ops = &altera_uart_ops; + port->flags = ASYNC_BOOT_AUTOCONF; + + uart_add_one_port(&altera_uart_driver, port); return 0; } static int __devexit altera_uart_remove(struct platform_device *pdev) { - struct uart_port *port; - int i; - - for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++) { - port = &altera_uart_ports[i].port; - if (port) - uart_remove_one_port(&altera_uart_driver, port); - } + struct uart_port *port = &altera_uart_ports[pdev->id].port; + uart_remove_one_port(&altera_uart_driver, port); return 0; } -- 1.7.2