From: Frederic Weisbecker <fweisbec@gmail.com>
To: LKML <linux-kernel@vger.kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
Ingo Molnar <mingo@elte.hu>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Arnaldo Carvalho de Melo <acme@redhat.com>,
Paul Mackerras <paulus@samba.org>,
Stephane Eranian <eranian@google.com>,
Cyrill Gorcunov <gorcunov@openvz.org>,
Tom Zanussi <tzanussi@gmail.com>,
Masami Hiramatsu <mhiramat@redhat.com>,
Steven Rostedt <rostedt@goodmis.org>,
Robert Richter <robert.richter@amd.com>,
"Frank Ch. Eigler" <fche@redhat.com>
Subject: [RFC PATCH 02/11] perf: Unified API to record selective sets of arch registers
Date: Fri, 22 Oct 2010 21:13:03 +0200 [thread overview]
Message-ID: <1287774792-23123-3-git-send-regression-fweisbec@gmail.com> (raw)
In-Reply-To: <1287774792-23123-1-git-send-regression-fweisbec@gmail.com>
This brings a new API to help the selective dump of registers on
event sampling, and its implementation in x86-32.
- The informations about the desired registers will be passed
to a single u64 mask. It's up to the architecture to map the
registers into the mask bits.
- The architecture must provide a non-zero and unique id to
identify the origin of a register set because interpreting a
register dump requires to know from which architecture it comes.
The achitecture is considered different between the 32 and 64 bits
version. x86-32 has the id 1.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
---
arch/Kconfig | 7 +++
arch/x86/Kconfig | 1 +
arch/x86/include/asm/perf_regs.h | 10 ++++
arch/x86/include/asm/perf_regs_32.h | 85 +++++++++++++++++++++++++++++++++++
4 files changed, 103 insertions(+), 0 deletions(-)
create mode 100644 arch/x86/include/asm/perf_regs.h
create mode 100644 arch/x86/include/asm/perf_regs_32.h
diff --git a/arch/Kconfig b/arch/Kconfig
index 53d7f61..a2bcd04 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -158,6 +158,13 @@ config HAVE_PERF_EVENTS_NMI
subsystem. Also has support for calculating CPU cycle events
to determine how many clock cycles in a given period.
+config HAVE_PERF_REGS_DEFS
+ bool
+ help
+ Support selective register dumps for perf events. This includes
+ bit-mapping of each registers and a unique architecture version,
+ also different between 32 and 64 bits.
+
config HAVE_ARCH_JUMP_LABEL
bool
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fd227d6..2b0ef54 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -58,6 +58,7 @@ config X86
select HAVE_MIXED_BREAKPOINTS_REGS
select PERF_EVENTS
select HAVE_PERF_EVENTS_NMI
+ select HAVE_PERF_REGS_DEFS if X86_32
select ANON_INODES
select HAVE_ARCH_KMEMCHECK
select HAVE_USER_RETURN_NOTIFIER
diff --git a/arch/x86/include/asm/perf_regs.h b/arch/x86/include/asm/perf_regs.h
new file mode 100644
index 0000000..fdf5df5
--- /dev/null
+++ b/arch/x86/include/asm/perf_regs.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_PERF_REGS_H
+#define _ASM_X86_PERF_REGS_H
+
+#ifdef CONFIG_X86_32
+#include "perf_regs_32.h"
+#endif
+
+/* TODO: x86-64 and compat */
+
+#endif /* _ASM_X86_PERF_REGS_H */
diff --git a/arch/x86/include/asm/perf_regs_32.h b/arch/x86/include/asm/perf_regs_32.h
new file mode 100644
index 0000000..660808b
--- /dev/null
+++ b/arch/x86/include/asm/perf_regs_32.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_X86_PERF_REGS_32_H
+#define _ASM_X86_PERF_REGS_32_H
+
+#define PERF_X86_32_REG_VERSION 1ULL
+
+enum perf_event_x86_32_regs {
+ PERF_X86_32_REG_EAX,
+ PERF_X86_32_REG_EBX,
+ PERF_X86_32_REG_ECX,
+ PERF_X86_32_REG_EDX,
+ PERF_X86_32_REG_ESI,
+ PERF_X86_32_REG_EDI,
+ PERF_X86_32_REG_EBP,
+ PERF_X86_32_REG_ESP,
+ PERF_X86_32_REG_EIP,
+ PERF_X86_32_REG_FLAGS,
+ PERF_X86_32_REG_CS,
+ PERF_X86_32_REG_DS,
+ PERF_X86_32_REG_ES,
+ PERF_X86_32_REG_FS,
+ PERF_X86_32_REG_GS,
+
+ /* Non ABI */
+ PERF_X86_32_REG_MAX,
+};
+
+#ifdef __KERNEL__
+
+#define PERF_X86_32_REG_RESERVED (~((1ULL << PERF_X86_32_REG_MAX) - 1ULL))
+
+static inline u64 perf_reg_version(void)
+{
+ return PERF_X86_32_REG_VERSION;
+}
+
+static inline int perf_reg_validate(u64 mask)
+{
+ if (mask & PERF_X86_32_REG_RESERVED)
+ return -EINVAL;
+
+ return 0;
+}
+
+static inline u64 perf_reg_value(struct pt_regs *regs, int idx)
+{
+ switch (idx) {
+ case PERF_X86_32_REG_EAX:
+ return regs->ax;
+ case PERF_X86_32_REG_EBX:
+ return regs->bx;
+ case PERF_X86_32_REG_ECX:
+ return regs->cx;
+ case PERF_X86_32_REG_EDX:
+ return regs->dx;
+ case PERF_X86_32_REG_ESI:
+ return regs->si;
+ case PERF_X86_32_REG_EDI:
+ return regs->di;
+ case PERF_X86_32_REG_EBP:
+ return regs->bp;
+ case PERF_X86_32_REG_ESP:
+ return regs->sp;
+ case PERF_X86_32_REG_EIP:
+ return regs->ip;
+ case PERF_X86_32_REG_FLAGS:
+ return regs->flags;
+ case PERF_X86_32_REG_CS:
+ return regs->cs;
+ case PERF_X86_32_REG_DS:
+ return regs->ds;
+ case PERF_X86_32_REG_ES:
+ return regs->es;
+ case PERF_X86_32_REG_FS:
+ return regs->fs;
+ case PERF_X86_32_REG_GS:
+ return regs->gs;
+ }
+
+ /* Well... */
+ return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_PERF_REGS_32_H */
--
1.6.2.3
next prev parent reply other threads:[~2010-10-22 19:16 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 19:13 [RFC v2] perf: Dwarf cfi based user callchains Frederic Weisbecker
2010-10-22 19:13 ` [RFC PATCH 01/11] uaccess: New copy_from_user_gup() API Frederic Weisbecker
2010-10-22 19:13 ` Frederic Weisbecker [this message]
2010-10-22 19:13 ` [RFC PATCH 03/11] perf: Add ability to dump user regs Frederic Weisbecker
2010-10-22 19:13 ` [RFC PATCH 04/11] perf: Add ability to dump part of the user stack Frederic Weisbecker
2010-10-22 19:13 ` [RFC PATCH 05/11] perf: New attribute to filter out user callchains Frederic Weisbecker
2010-10-22 19:13 ` [RFC PATCH 06/11] perf: Support for dwarf mode callchain on perf record Frederic Weisbecker
2010-10-22 19:13 ` [RFC PATCH 07/11] perf: Build with dwarf cfi Frederic Weisbecker
2010-10-22 19:13 ` [RFC PATCH 08/11] perf: Support for error passed over pointers Frederic Weisbecker
2010-10-22 19:13 ` [RFC PATCH 09/11] perf: Add libunwind dependency for dwarf cfi unwinding Frederic Weisbecker
2010-10-22 19:13 ` [RFC PATCH 10/11] perf: Support user regs and stack in sample parsing Frederic Weisbecker
2010-10-22 19:13 ` [RFC PATCH 11/11] perf: Support for dwarf cfi unwinding on post processing Frederic Weisbecker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287774792-23123-3-git-send-regression-fweisbec@gmail.com \
--to=fweisbec@gmail.com \
--cc=a.p.zijlstra@chello.nl \
--cc=acme@redhat.com \
--cc=eranian@google.com \
--cc=fche@redhat.com \
--cc=gorcunov@openvz.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mhiramat@redhat.com \
--cc=mingo@elte.hu \
--cc=paulus@samba.org \
--cc=robert.richter@amd.com \
--cc=rostedt@goodmis.org \
--cc=tzanussi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome