From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Len Brown <lenb@kernel.org>,
linux-kernel@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 04/15] x86, apic: Remove early_init_lapic_mapping
Date: Sat, 23 Oct 2010 18:02:18 -0700 [thread overview]
Message-ID: <1287882149-29275-5-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1287882149-29275-1-git-send-email-yinghai@kernel.org>
It is almost the same as smp_register_lapic_addr()
Just need to make smp_read_mpc() call smp_register_lapic_addr when early==1.
also add printing out in smp_register_lapic_address()
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/apic.h | 1 -
arch/x86/kernel/apic/apic.c | 24 ++----------------------
arch/x86/kernel/mpparse.c | 8 ++------
arch/x86/mm/k8topology_64.c | 1 -
4 files changed, 4 insertions(+), 30 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index dcc5f48..69879dd 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -245,7 +245,6 @@ extern int apic_force_enable(void);
* On 32bit this is mach-xxx local
*/
#ifdef CONFIG_X86_64
-extern void early_init_lapic_mapping(void);
extern int apic_is_clustered_box(void);
#else
static inline int apic_is_clustered_box(void)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 4827c17..05b8bf7 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1631,28 +1631,6 @@ no_apic:
}
#endif
-#ifdef CONFIG_X86_64
-void __init early_init_lapic_mapping(void)
-{
- /*
- * If no local APIC can be found then go out
- * : it means there is no mpatable and MADT
- */
- if (!smp_found_config)
- return;
-
- set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
- apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
- APIC_BASE, mp_lapic_addr);
-
- /*
- * Fetch the APIC ID of the BSP in case we have a
- * default configuration (or the MP table is broken).
- */
- boot_cpu_physical_apicid = read_apic_id();
-}
-#endif
-
/**
* init_apic_mappings - initialize APIC mappings
*/
@@ -1708,6 +1686,8 @@ void __init smp_register_lapic_address(unsigned long address)
mp_lapic_addr = address;
set_fixmap_nocache(FIX_APIC_BASE, address);
+ apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
+ APIC_BASE, mp_lapic_addr);
if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = read_apic_id();
apic_version[boot_cpu_physical_apicid] =
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 1fefb7f..a550315 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -289,17 +289,13 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
#ifdef CONFIG_X86_32
generic_mps_oem_check(mpc, oem, str);
#endif
- /* save the local APIC address, it might be non-default */
+ /* Initialize the lapic mapping */
if (!acpi_lapic)
- mp_lapic_addr = mpc->lapic;
+ smp_register_lapic_address(mpc->lapic);
if (early)
return 1;
- /* Initialize the lapic mapping */
- if (!acpi_lapic)
- smp_register_lapic_address(mpc->lapic);
-
if (mpc->oemptr)
x86_init.mpparse.smp_read_mpc_oem(mpc);
diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c
index 804a3b6..446bae2 100644
--- a/arch/x86/mm/k8topology_64.c
+++ b/arch/x86/mm/k8topology_64.c
@@ -66,7 +66,6 @@ static __init void early_get_boot_cpu_id(void)
if (smp_found_config)
early_get_smp_config();
#endif
- early_init_lapic_mapping();
}
int __init k8_get_nodes(struct bootnode *physnodes)
--
1.7.1
next prev parent reply other threads:[~2010-10-24 1:05 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-24 1:02 [PATCH 00/15] x86: APIC related clean up Yinghai Lu
2010-10-24 1:02 ` [PATCH 01/15] x86, apic: Don't write io_apic ID if it is not changed Yinghai Lu
2010-10-24 1:02 ` [PATCH 02/15] x86, apic: Fix lapic mapping with construct ISA and visws mptable path Yinghai Lu
2010-10-24 9:47 ` Thomas Gleixner
2010-10-24 1:02 ` [PATCH 03/15] x86, apic: Merge two register_lapic_address() Yinghai Lu
2010-10-24 9:49 ` Thomas Gleixner
2010-10-24 1:02 ` Yinghai Lu [this message]
2010-10-24 9:53 ` [PATCH 04/15] x86, apic: Remove early_init_lapic_mapping Thomas Gleixner
2010-10-24 1:02 ` [PATCH 05/15] x86: Call smp_register_lapic_address for contruct_default mptable path Yinghai Lu
2010-10-24 1:02 ` [PATCH 06/15] x86, apic: Use smp_register_lapic_address in init_apic_mapping Yinghai Lu
2010-10-24 1:02 ` [PATCH 07/15] x86, sfi: Use smp_register_lapic_address() Yinghai Lu
2010-10-24 9:56 ` Thomas Gleixner
2010-10-24 1:02 ` [PATCH 08/15] x86, visws: Set_fixmap in find_smp_config Yinghai Lu
2010-10-24 9:58 ` Thomas Gleixner
2010-10-24 1:02 ` [PATCH 09/15] x86: on !find_smp_config path use smp_register_lapic_address Yinghai Lu
2010-10-24 10:01 ` Thomas Gleixner
2010-10-24 1:02 ` [PATCH 10/15] x86, apic: Set fixmap only one time Yinghai Lu
2010-10-24 10:03 ` Thomas Gleixner
2010-10-24 1:02 ` [PATCH 11/15] x86, ioapic: Only print mapping for ioapic in right place Yinghai Lu
2010-10-25 16:55 ` [PATCH] x86, ioapic: Add debug printing when mapping for ioapic Yinghai Lu
2010-10-25 16:59 ` [PATCH] x86, ioapic: Don't map ioapic regs two times Yinghai Lu
2010-10-24 1:02 ` [PATCH 12/15] x86, x2apic: Don't map lapic addr for preenabled x2apic Yinghai Lu
2010-10-24 1:02 ` [PATCH 13/15] x86, apic, acpi: Handle xapic/x2apic entries in MADT at same time Yinghai Lu
2010-10-24 9:44 ` Thomas Gleixner
2010-10-24 1:02 ` [PATCH 14/15] acpi: Reverse uid and apic_id print out for x2apic Yinghai Lu
2010-10-24 1:02 ` [PATCH 15/15] x86: Disabling x2apic if nox2apic is specified Yinghai Lu
2010-10-24 10:15 ` Thomas Gleixner
2010-10-24 22:09 ` Yinghai Lu
2010-10-25 17:50 ` Suresh Siddha
2010-10-27 6:27 ` [PATCH -v3] x86: Disable " Yinghai Lu
2010-10-29 5:53 ` Suresh Siddha
2010-10-29 7:26 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287882149-29275-5-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome