mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org, ralf@linux-mips.org,
	devicetree-discuss@lists.ozlabs.org, grant.likely@secretlab.ca,
	linux-kernel@vger.kernel.org
Cc: David Daney <ddaney@caviumnetworks.com>,
	Jeremy Kerr <jeremy.kerr@canonical.com>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Dan Carpenter <error27@gmail.com>,
	Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH] of: of_mdio: Fix some endianness problems.
Date: Wed, 27 Oct 2010 18:03:47 -0700	[thread overview]
Message-ID: <1288227827-5447-1-git-send-email-ddaney@caviumnetworks.com> (raw)

In of_mdiobus_register(), the __be32 *addr variable is dereferenced.
This will not work on little-endian targets.  Also since it is
unsigned, checking for less than zero is redundant.

Fix these two issues.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/of/of_mdio.c |   23 ++++++++++++++---------
 1 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 1fce00e..b370306 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -52,27 +52,32 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 
 	/* Loop over the child nodes and register a phy_device for each one */
 	for_each_child_of_node(np, child) {
-		const __be32 *addr;
+		const __be32 *paddr;
+		u32 addr;
 		int len;
 
 		/* A PHY must have a reg property in the range [0-31] */
-		addr = of_get_property(child, "reg", &len);
-		if (!addr || len < sizeof(*addr) || *addr >= 32 || *addr < 0) {
+		paddr = of_get_property(child, "reg", &len);
+		if (!paddr || len < sizeof(*paddr)) {
+addr_err:
 			dev_err(&mdio->dev, "%s has invalid PHY address\n",
 				child->full_name);
 			continue;
 		}
+		addr = be32_to_cpup(paddr);
+		if (addr >= 32)
+			goto addr_err;
 
 		if (mdio->irq) {
-			mdio->irq[*addr] = irq_of_parse_and_map(child, 0);
-			if (!mdio->irq[*addr])
-				mdio->irq[*addr] = PHY_POLL;
+			mdio->irq[addr] = irq_of_parse_and_map(child, 0);
+			if (!mdio->irq[addr])
+				mdio->irq[addr] = PHY_POLL;
 		}
 
-		phy = get_phy_device(mdio, be32_to_cpup(addr));
+		phy = get_phy_device(mdio, addr);
 		if (!phy || IS_ERR(phy)) {
 			dev_err(&mdio->dev, "error probing PHY at address %i\n",
-				*addr);
+				addr);
 			continue;
 		}
 		phy_scan_fixups(phy);
@@ -91,7 +96,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 		}
 
 		dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
-			child->name, *addr);
+			child->name, addr);
 	}
 
 	return 0;
-- 
1.7.2.3


             reply	other threads:[~2010-10-28  1:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-28  1:03 David Daney [this message]
2010-10-30  6:32 ` Grant Likely
2010-10-31  2:54   ` Grant Likely
2010-11-01 11:44     ` Sergei Shtylyov
2010-11-01 14:20       ` Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1288227827-5447-1-git-send-email-ddaney@caviumnetworks.com \
    --to=ddaney@caviumnetworks.com \
    --cc=benh@kernel.crashing.org \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=error27@gmail.com \
    --cc=grant.likely@secretlab.ca \
    --cc=gregkh@suse.de \
    --cc=jeremy.kerr@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®