From: Jason Wessel <jason.wessel@windriver.com>
To: torvalds@linux-foundation.org
Cc: linux-kernel@vger.kernel.org,
kgdb-bugreport@lists.sourceforge.net,
Dongdong Deng <dongdong.deng@windriver.com>,
Jason Wessel <jason.wessel@windriver.com>
Subject: [PATCH 5/7] debug_core,x86,blackfin: Clean up hw debug disable API
Date: Fri, 29 Oct 2010 13:43:39 -0500 [thread overview]
Message-ID: <1288377821-24520-6-git-send-email-jason.wessel@windriver.com> (raw)
In-Reply-To: <1288377821-24520-1-git-send-email-jason.wessel@windriver.com>
From: Dongdong Deng <dongdong.deng@windriver.com>
The kgdb_disable_hw_debug() was an architecture specific function for
disabling all hardware breakpoints on a per cpu basis when entering
the debug core.
This patch will remove the weak function kdbg_disable_hw_debug() and
change it into a call back which lives with the rest of hw breakpoint
call backs in struct kgdb_arch.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
arch/blackfin/kernel/kgdb.c | 3 ++-
arch/x86/kernel/kgdb.c | 3 ++-
include/linux/kgdb.h | 13 +++----------
kernel/debug/debug_core.c | 16 +++-------------
4 files changed, 10 insertions(+), 25 deletions(-)
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index 08bc44e..edae461 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -320,7 +320,7 @@ static void bfin_correct_hw_break(void)
}
}
-void kgdb_disable_hw_debug(struct pt_regs *regs)
+static void bfin_disable_hw_debug(struct pt_regs *regs)
{
/* Disable hardware debugging while we are in kgdb */
bfin_write_WPIACTL(0);
@@ -406,6 +406,7 @@ struct kgdb_arch arch_kgdb_ops = {
#endif
.set_hw_breakpoint = bfin_set_hw_break,
.remove_hw_breakpoint = bfin_remove_hw_break,
+ .disable_hw_break = bfin_disable_hw_debug,
.remove_all_hw_break = bfin_remove_all_hw_break,
.correct_hw_break = bfin_correct_hw_break,
};
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index d81cfeb..ec592ca 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -387,7 +387,7 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
* disable hardware debugging while it is processing gdb packets or
* handling exception.
*/
-void kgdb_disable_hw_debug(struct pt_regs *regs)
+static void kgdb_disable_hw_debug(struct pt_regs *regs)
{
int i;
int cpu = raw_smp_processor_id();
@@ -724,6 +724,7 @@ struct kgdb_arch arch_kgdb_ops = {
.flags = KGDB_HW_BREAKPOINT,
.set_hw_breakpoint = kgdb_set_hw_break,
.remove_hw_breakpoint = kgdb_remove_hw_break,
+ .disable_hw_break = kgdb_disable_hw_debug,
.remove_all_hw_break = kgdb_remove_all_hw_break,
.correct_hw_break = kgdb_correct_hw_break,
};
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index cc96f0f..092e425 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -35,16 +35,6 @@ struct pt_regs;
*/
extern int kgdb_skipexception(int exception, struct pt_regs *regs);
-/**
- * kgdb_disable_hw_debug - (optional) Disable hardware debugging hook
- * @regs: Current &struct pt_regs.
- *
- * This function will be called if the particular architecture must
- * disable hardware debugging while it is processing gdb packets or
- * handling exception.
- */
-extern void kgdb_disable_hw_debug(struct pt_regs *regs);
-
struct tasklet_struct;
struct task_struct;
struct uart_port;
@@ -243,6 +233,8 @@ extern void kgdb_arch_late(void);
* breakpoint.
* @remove_hw_breakpoint: Allow an architecture to specify how to remove a
* hardware breakpoint.
+ * @disable_hw_break: Allow an architecture to specify how to disable
+ * hardware breakpoints for a single cpu.
* @remove_all_hw_break: Allow an architecture to specify how to remove all
* hardware breakpoints.
* @correct_hw_break: Allow an architecture to specify how to correct the
@@ -256,6 +248,7 @@ struct kgdb_arch {
int (*remove_breakpoint)(unsigned long, char *);
int (*set_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
int (*remove_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
+ void (*disable_hw_break)(struct pt_regs *regs);
void (*remove_all_hw_break)(void);
void (*correct_hw_break)(void);
};
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index fec596d..cefd4a1 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -209,18 +209,6 @@ int __weak kgdb_skipexception(int exception, struct pt_regs *regs)
return 0;
}
-/**
- * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb.
- * @regs: Current &struct pt_regs.
- *
- * This function will be called if the particular architecture must
- * disable hardware debugging while it is processing gdb packets or
- * handling exception.
- */
-void __weak kgdb_disable_hw_debug(struct pt_regs *regs)
-{
-}
-
/*
* Some architectures need cache flushes when we set/clear a
* breakpoint:
@@ -484,7 +472,9 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs,
atomic_inc(&masters_in_kgdb);
else
atomic_inc(&slaves_in_kgdb);
- kgdb_disable_hw_debug(ks->linux_regs);
+
+ if (arch_kgdb_ops.disable_hw_break)
+ arch_kgdb_ops.disable_hw_break(regs);
acquirelock:
/*
--
1.6.3.3
next prev parent reply other threads:[~2010-10-29 18:44 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-29 18:43 [GIT PULL] kgdb/kdb tree for 2.6.37 Jason Wessel
2010-10-29 18:43 ` [PATCH 1/7] kdb: Add kdb kernel module sample Jason Wessel
2010-10-29 18:43 ` [PATCH 2/7] kdb: fix per_cpu command to remove supress mask Jason Wessel
2010-10-29 18:43 ` [PATCH 3/7] kgdb,arm: fix register dump Jason Wessel
2010-10-29 18:43 ` [PATCH 4/7] kdb: Fix early debugging crash regression Jason Wessel
2010-10-29 18:43 ` Jason Wessel [this message]
2010-10-29 18:43 ` [PATCH 6/7] kgdbts: prevent re-entry to kgdbts before it unregisters Jason Wessel
2010-10-29 18:43 ` [PATCH 7/7] kgdb,ppc: Individual register get/set for ppc Jason Wessel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288377821-24520-6-git-send-email-jason.wessel@windriver.com \
--to=jason.wessel@windriver.com \
--cc=dongdong.deng@windriver.com \
--cc=kgdb-bugreport@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®