From: "Henrik Rydberg" <rydberg@euromail.se>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
"Edgar (gimli) Hucek" <gimli@dark-green.com>,
stable@kernel.org, Henrik Rydberg <rydberg@euromail.se>
Subject: [PATCH] input: bcm5974: Add support for MacBookAir3
Date: Tue, 9 Nov 2010 17:38:42 +0100 [thread overview]
Message-ID: <1289320722-1948-1-git-send-email-rydberg@euromail.se> (raw)
From: Edgar (gimli) Hucek <gimli@dark-green.com>
This patch adds support for the MacBookAir3,1 and MacBookAir3,2
models.
[rydberg@euromail.se: touchpad range calibration]
Cc: stable@kernel.org
Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
---
Hi Dmitry, Jiri,
This patch was seen on lkml last week, and has now been excercised by
a larger set of users. As usual, this patch should go before or
together with the HID changes, so as not to break basic support from
the non-MT HID driver.
Cheers,
Henrik
drivers/input/mouse/bcm5974.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index b952317..ee82851 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -55,6 +55,14 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
+/* MacbookAir3,2 (unibody), aka wellspring5 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI 0x023f
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO 0x0240
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS 0x0241
+/* MacbookAir3,1 (unibody), aka wellspring4 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
@@ -80,6 +88,14 @@ static const struct usb_device_id bcm5974_table[] = {
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
+ /* MacbookAir3,2 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_JIS),
+ /* MacbookAir3,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
/* Terminating entry */
{}
};
@@ -234,6 +250,30 @@ static const struct bcm5974_config bcm5974_config_table[] = {
{ DIM_X, DIM_X / SN_COORD, -4460, 5166 },
{ DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING4_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING4_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+ },
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4616, 5112 },
+ { DIM_Y, DIM_Y / SN_COORD, -142, 5234 }
+ },
{}
};
--
1.7.1
next reply other threads:[~2010-11-09 16:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-09 16:38 Henrik Rydberg [this message]
2010-11-11 8:39 ` Dmitry Torokhov
2010-11-15 13:18 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289320722-1948-1-git-send-email-rydberg@euromail.se \
--to=rydberg@euromail.se \
--cc=dmitry.torokhov@gmail.com \
--cc=gimli@dark-green.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®