From: Don Zickus <dzickus@redhat.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>,
Robert Richter <robert.richter@amd.com>,
ying.huang@intel.com, Andi Kleen <andi@firstfloor.org>,
LKML <linux-kernel@vger.kernel.org>,
Don Zickus <dzickus@redhat.com>
Subject: [PATCH 5/6] x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU
Date: Fri, 12 Nov 2010 09:43:52 -0500 [thread overview]
Message-ID: <1289573033-2889-6-git-send-email-dzickus@redhat.com> (raw)
In-Reply-To: <1289573033-2889-1-git-send-email-dzickus@redhat.com>
In original NMI handler, NMI reason io port (0x61) is only processed
on BSP. This makes it impossible to hot-remove BSP. To solve the
issue, a raw spinlock is used to make the port can be processed on any
CPU.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Conflicts:
arch/x86/kernel/traps.c
---
arch/x86/kernel/traps.c | 36 +++++++++++++++++++-----------------
1 files changed, 19 insertions(+), 17 deletions(-)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 79b9b2f..ed40ad6 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -83,6 +83,12 @@ EXPORT_SYMBOL_GPL(used_vectors);
static int ignore_nmis;
+/*
+ * Prevent NMI reason port (0x61) being accessed simultaneously, can
+ * only be used in NMI handler.
+ */
+static DEFINE_RAW_SPINLOCK(nmi_reason_lock);
+
static inline void conditional_sti(struct pt_regs *regs)
{
if (regs->flags & X86_EFLAGS_IF)
@@ -383,7 +389,6 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
{
unsigned char reason = 0;
- int cpu;
/*
* CPU-specific NMI must be processed before non-CPU-specific
@@ -399,25 +404,22 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
return;
/* Non-CPU-specific NMI: NMI sources can be processed on any CPU */
- cpu = smp_processor_id();
- /* Only the BSP gets external NMIs from the system. */
- if (!cpu) {
- reason = get_nmi_reason();
- if (reason & NMI_REASON_MASK) {
- if (reason & NMI_REASON_SERR)
- pci_serr_error(reason, regs);
- else if (reason & NMI_REASON_IOCHK)
- io_check_error(reason, regs);
+ raw_spin_lock(&nmi_reason_lock);
+ reason = get_nmi_reason();
+ if (reason & NMI_REASON_MASK) {
+ if (reason & NMI_REASON_SERR)
+ pci_serr_error(reason, regs);
+ else if (reason & NMI_REASON_IOCHK)
+ io_check_error(reason, regs);
#ifdef CONFIG_X86_32
- /*
- * Reassert NMI in case it became active
- * meanwhile as it's edge-triggered:
- */
- reassert_nmi();
+ /*
+ * Reassert NMI in case it became active
+ * meanwhile as it's edge-triggered:
+ */
+ reassert_nmi();
#endif
- return;
- }
}
+ raw_spin_unlock(&nmi_reason_lock);
#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_LOCKUP_DETECTOR)
if (nmi_watchdog_tick(regs, reason))
--
1.7.2.3
next prev parent reply other threads:[~2010-11-12 14:44 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-12 14:43 [V2 PATCH 0/6] x86, NMI: give NMI handler a face-lift Don Zickus
2010-11-12 14:43 ` [PATCH 1/6] x86, NMI: Add NMI symbol constants and rename memory parity to PCI SERR Don Zickus
2010-11-12 14:43 ` [PATCH 2/6] x86, NMI: Add touch_nmi_watchdog to io_check_error delay Don Zickus
2010-11-12 14:43 ` [PATCH 3/6] x86, NMI: Rewrite NMI handler Don Zickus
2010-11-12 14:43 ` [PATCH 4/6] x86, NMI: Remove DIE_NMI_IPI and add priorties to handlers Don Zickus
2010-11-12 14:43 ` Don Zickus [this message]
2010-11-12 14:43 ` [PATCH 6/6] x86, NMI: Remove do_nmi_callback logic Don Zickus
2010-11-12 15:05 ` [V2 PATCH 0/6] x86, NMI: give NMI handler a face-lift Jason Wessel
2010-11-12 15:42 ` Don Zickus
2010-11-12 15:55 ` Jason Wessel
2010-11-12 16:11 ` Don Zickus
2010-11-12 16:34 ` Jason Wessel
2010-11-12 17:27 ` Don Zickus
2010-11-16 18:43 ` Don Zickus
2010-11-16 20:04 ` Jason Wessel
2010-11-18 8:05 ` Ingo Molnar
2010-11-18 12:47 ` Jason Wessel
2010-11-18 13:17 ` Peter Zijlstra
2010-11-18 14:32 ` Don Zickus
2010-11-18 15:18 ` Jason Wessel
2010-11-18 15:38 ` Peter Zijlstra
2010-11-18 19:32 ` Don Zickus
2010-11-18 19:51 ` Jason Wessel
2010-11-18 20:04 ` Peter Zijlstra
2010-11-18 20:08 ` Don Zickus
2010-11-18 20:11 ` Cyrill Gorcunov
2010-11-18 20:52 ` Don Zickus
2010-11-18 21:01 ` Cyrill Gorcunov
2010-11-18 21:16 ` Don Zickus
2010-11-18 21:26 ` Cyrill Gorcunov
2010-11-18 20:28 ` Cyrill Gorcunov
2010-11-18 20:39 ` Cyrill Gorcunov
2010-11-18 21:02 ` Don Zickus
2010-11-18 21:19 ` Cyrill Gorcunov
2010-11-18 20:30 ` Peter Zijlstra
2010-11-19 16:59 ` Don Zickus
2010-11-19 18:25 ` Peter Zijlstra
2010-11-19 22:59 ` Don Zickus
2010-11-19 23:09 ` Peter Zijlstra
2010-11-19 23:30 ` Jason Wessel
2010-11-22 14:22 ` Don Zickus
2010-11-22 14:22 ` Don Zickus
2010-11-22 14:29 ` Peter Zijlstra
2010-11-18 20:04 ` Cyrill Gorcunov
2010-11-18 21:56 ` Cyrill Gorcunov
2010-11-18 21:58 ` Cyrill Gorcunov
2010-11-18 22:15 ` Cyrill Gorcunov
2010-11-18 22:24 ` Jason Wessel
2010-11-18 22:27 ` Cyrill Gorcunov
2011-01-06 21:18 [PATCH 0/6] x86, NMI: die_notifier and default_do_nmi cleanups Don Zickus
2011-01-06 21:18 ` [PATCH 5/6] x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU Don Zickus
2011-02-23 2:39 ` Maciej W. Rozycki
2011-02-25 21:45 ` Don Zickus
2011-02-26 8:02 ` Cyrill Gorcunov
2011-02-26 11:19 ` huang ying
2011-02-26 12:34 ` Cyrill Gorcunov
2011-02-26 14:07 ` huang ying
2011-02-26 15:09 ` Cyrill Gorcunov
2011-02-27 1:01 ` huang ying
2011-02-27 11:19 ` Cyrill Gorcunov
2011-02-28 18:37 ` Don Zickus
2011-02-28 18:48 ` Cyrill Gorcunov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289573033-2889-6-git-send-email-dzickus@redhat.com \
--to=dzickus@redhat.com \
--cc=andi@firstfloor.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
--cc=robert.richter@amd.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®