Hi... On fact, when I try apply the patch, I took some errors. Here's: patching file include/linux/sched.h Hunk #1 succeeded at 506 (offset -3 lines). Hunk #2 succeeded at 575 (offset -3 lines). Hunk #3 succeeded at 1905 (offset -31 lines). patching file kernel/sched.c Hunk #2 succeeded at 613 (offset 7 lines). Hunk #3 FAILED at 2010. Hunk #4 succeeded at 7753 (offset -230 lines). Hunk #5 succeeded at 8283 (offset -230 lines). Hunk #6 succeeded at 8308 (offset -230 lines). 1 out of 6 hunks FAILED -- saving rejects to file kernel/sched.c.rej patching file kernel/fork.c Hunk #1 succeeded at 173 (offset -1 lines). Hunk #2 succeeded at 902 (offset -4 lines). patching file drivers/tty/tty_io.c Hunk #1 FAILED at 3160. 1 out of 1 hunk FAILED -- saving rejects to file drivers/tty/tty_io.c.rej patching file kernel/sched_autogroup.h patching file kernel/sched_autogroup.c patching file kernel/sysctl.c Hunk #1 succeeded at 384 (offset 2 lines). patching file init/Kconfig Hunk #1 succeeded at 652 with fuzz 2 (offset -76 lines). patching file Documentation/kernel-parameters.txt Hunk #1 succeeded at 1610 (offset -12 lines). Attached, you have the patch. How can I fix this! Note: I'm using Ubuntu Linux 10.10... But, as I said before, I'm using vanilla kernel... Thanks again Em Qua, 2010-11-17 às 16:21 -0700, Mike Galbraith escreveu: > On Wed, 2010-11-17 at 17:18 -0200, Gilberto Nunes wrote: > > Here is!! > > Hm. Looks like you must have a miss-applied patch. Builds fine here > with your config. > > -Mike > -- -- Gilberto Nunes <><