From: Matthew Garrett <mjg@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: rpurdie@rpsys.net, akpm@linux-foundation.org,
nouveau@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
intel-gfx@lists.freedesktop.org, linux-acpi@vger.kernel.org,
lenb@kernel.org, Matthew Garrett <mjg@redhat.com>
Subject: [PATCH 4/5] nouveau: Change the backlight parent device to the connector, not the PCI dev
Date: Fri, 19 Nov 2010 10:53:55 -0500 [thread overview]
Message-ID: <1290182036-30484-4-git-send-email-mjg@redhat.com> (raw)
In-Reply-To: <1290182036-30484-1-git-send-email-mjg@redhat.com>
We may eventually end up with per-connector backlights, especially with
ddcci devices. Make sure that the parent node for the backlight device is
the connector rather than the PCI device.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
drivers/gpu/drm/nouveau/nouveau_backlight.c | 21 ++++++++++++---------
drivers/gpu/drm/nouveau/nouveau_connector.c | 9 +++++++++
drivers/gpu/drm/nouveau/nouveau_drv.h | 4 ++--
3 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index 9485af3..7e8a448 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -87,10 +87,11 @@ static struct backlight_ops nv50_bl_ops = {
.update_status = nv50_set_intensity,
};
-static int nouveau_nv40_backlight_init(struct drm_device *dev)
+static int nouveau_nv40_backlight_init(struct drm_connector *connector)
{
- struct backlight_properties props;
+ struct drm_device *dev = connector->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct backlight_properties props;
struct backlight_device *bd;
if (!(nv_rd32(dev, NV40_PMC_BACKLIGHT) & NV40_PMC_BACKLIGHT_MASK))
@@ -99,7 +100,7 @@ static int nouveau_nv40_backlight_init(struct drm_device *dev)
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_RAW;
props.max_brightness = 31;
- bd = backlight_device_register("nv_backlight", &dev->pdev->dev, dev,
+ bd = backlight_device_register("nv_backlight", &connector->kdev, dev,
&nv40_bl_ops, &props);
if (IS_ERR(bd))
return PTR_ERR(bd);
@@ -111,10 +112,11 @@ static int nouveau_nv40_backlight_init(struct drm_device *dev)
return 0;
}
-static int nouveau_nv50_backlight_init(struct drm_device *dev)
+static int nouveau_nv50_backlight_init(struct drm_connector *connector)
{
- struct backlight_properties props;
+ struct drm_device *dev = connector->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct backlight_properties props;
struct backlight_device *bd;
if (!nv_rd32(dev, NV50_PDISPLAY_SOR_BACKLIGHT))
@@ -123,7 +125,7 @@ static int nouveau_nv50_backlight_init(struct drm_device *dev)
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_RAW;
props.max_brightness = 1025;
- bd = backlight_device_register("nv_backlight", &dev->pdev->dev, dev,
+ bd = backlight_device_register("nv_backlight", &connector->kdev, dev,
&nv50_bl_ops, &props);
if (IS_ERR(bd))
return PTR_ERR(bd);
@@ -134,15 +136,16 @@ static int nouveau_nv50_backlight_init(struct drm_device *dev)
return 0;
}
-int nouveau_backlight_init(struct drm_device *dev)
+int nouveau_backlight_init(struct drm_connector *connector)
{
+ struct drm_device *dev = connector->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
switch (dev_priv->card_type) {
case NV_40:
- return nouveau_nv40_backlight_init(dev);
+ return nouveau_nv40_backlight_init(connector);
case NV_50:
- return nouveau_nv50_backlight_init(dev);
+ return nouveau_nv50_backlight_init(connector);
default:
break;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 0871495..914058d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -106,6 +106,10 @@ nouveau_connector_destroy(struct drm_connector *drm_connector)
dev = nv_connector->base.dev;
NV_DEBUG_KMS(dev, "\n");
+ if (drm_connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
+ drm_connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+ nouveau_backlight_exit(dev);
+
kfree(nv_connector->edid);
drm_sysfs_connector_remove(drm_connector);
drm_connector_cleanup(drm_connector);
@@ -894,6 +898,11 @@ nouveau_connector_create(struct drm_device *dev, int index)
nouveau_connector_set_polling(connector);
drm_sysfs_connector_add(connector);
+
+ if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
+ connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+ nouveau_backlight_init(connector);
+
dcb->drm = connector;
return dcb->drm;
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 3a07e58..3c65b77 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -933,10 +933,10 @@ static inline int nouveau_acpi_edid(struct drm_device *dev, struct drm_connector
/* nouveau_backlight.c */
#ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
-extern int nouveau_backlight_init(struct drm_device *);
+extern int nouveau_backlight_init(struct drm_connector *);
extern void nouveau_backlight_exit(struct drm_device *);
#else
-static inline int nouveau_backlight_init(struct drm_device *dev)
+static inline int nouveau_backlight_init(struct drm_connector *dev)
{
return 0;
}
--
1.7.3.2
next prev parent reply other threads:[~2010-11-19 15:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-19 15:53 [PATCH 1/5] Backlight: Add backlight type Matthew Garrett
2010-11-19 15:53 ` [PATCH 2/5] i915: Add native backlight control Matthew Garrett
2010-11-19 15:53 ` [PATCH 3/5] radeon: Expose backlight class device for legacy LVDS encoder Matthew Garrett
2010-11-19 15:53 ` Matthew Garrett [this message]
2010-11-19 15:53 ` [PATCH 5/5] ACPI: Tie ACPI backlight devices to PCI devices if possible Matthew Garrett
2010-11-19 20:05 ` [PATCH 1/5] Backlight: Add backlight type Andrew Morton
2010-11-19 20:25 ` Matthew Garrett
2010-11-19 20:35 ` Andrew Morton
2010-11-22 10:17 ` Richard Purdie
2010-11-22 12:30 ` Matthew Garrett
2010-11-22 13:35 ` Richard Purdie
2010-11-22 13:40 ` Matthew Garrett
2011-01-14 19:24 Matthew Garrett
2011-01-14 19:24 ` [PATCH 4/5] nouveau: Change the backlight parent device to the connector, not the PCI dev Matthew Garrett
2011-01-14 19:30 ` Anca Emanuel
2011-01-14 20:20 ` Matthew Garrett
2011-01-15 9:49 ` Ben Skeggs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290182036-30484-4-git-send-email-mjg@redhat.com \
--to=mjg@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nouveau@lists.freedesktop.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome