mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ian Campbell <ian.campbell@citrix.com>
To: linux-kernel@vger.kernel.org
Cc: Ian Campbell <ian.campbell@citrix.com>,
	Borislav Petkov <bp@alien8.de>,
	"H. Peter Anvin" <hpa@linux.intel.com>,
	Jeremy Fitzhardinge <jeremy@goop.org>
Subject: [PATCH] xen: x86/32: perform initial startup on initial_page_table
Date: Wed, 24 Nov 2010 12:09:41 +0000	[thread overview]
Message-ID: <1290600581-8392-1-git-send-email-ian.campbell@citrix.com> (raw)

Only make swapper_pg_dir readonly and pinned when generic x86 architecture code
(which also starts on initial_page_table) switches to it.  This helps ensure
that the generic setup paths work on Xen unmodified. In particular
clone_pgd_range writes directly to the destination pgd entries and is used to
initialise swapper_pg_dir so we need to ensure that it remains writeable until
the last possible moment during bring up.

This is complicated slightly by the need to avoid sharing kernel PMD entries
when running under Xen, therefore the Xen implementation must make a copy of
the kernel PMD (which is otherwise referred to by both intial_page_table and
swapper_pg_dir) before switching to swapper_pg_dir.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/xen/enlighten.c |    2 -
 arch/x86/xen/mmu.c       |   69 +++++++++++++++++++++++++++++++++++++--------
 2 files changed, 56 insertions(+), 15 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 7250bef..02c710b 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1200,8 +1200,6 @@ asmlinkage void __init xen_start_kernel(void)
 	/* Allocate and initialize top and mid mfn levels for p2m structure */
 	xen_build_mfn_list_list();
 
-	init_mm.pgd = pgd;
-
 	/* keep using Xen gdt for now; no urgent need to change it */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 790af90..a1feff9 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2133,44 +2133,83 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 	return pgd;
 }
 #else	/* !CONFIG_X86_64 */
-static RESERVE_BRK_ARRAY(pmd_t, level2_kernel_pgt, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD);
+
+static __init void xen_write_cr3_init(unsigned long cr3)
+{
+	unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
+
+	BUG_ON(read_cr3() != __pa(initial_page_table));
+	BUG_ON(cr3 != __pa(swapper_pg_dir));
+
+	/*
+	 * We are switching to swapper_pg_dir for the first time (from
+	 * initial_page_table) and therefore need to mark that page
+	 * read-only and then pin it.
+	 *
+	 * Xen disallows sharing of kernel PMDs for PAE
+	 * guests. Therefore we must copy the kernel PMD from
+	 * initial_page_table into a new kernel PMD to be used in
+	 * swapper_pg_dir.
+	 */
+	swapper_kernel_pmd =
+		extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+	memcpy(swapper_kernel_pmd, initial_kernel_pmd,
+	       sizeof(pmd_t) * PTRS_PER_PMD);
+	swapper_pg_dir[KERNEL_PGD_BOUNDARY] =
+		__pgd(__pa(swapper_kernel_pmd) | _PAGE_PRESENT);
+	set_page_prot(swapper_kernel_pmd, PAGE_KERNEL_RO);
+
+	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	xen_write_cr3(cr3);
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, pfn);
+
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
+			  PFN_DOWN(__pa(initial_page_table)));
+	set_page_prot(initial_page_table, PAGE_KERNEL);
+	set_page_prot(initial_kernel_pmd, PAGE_KERNEL);
+
+	pv_mmu_ops.write_cr3 = &xen_write_cr3;
+}
 
 __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 					 unsigned long max_pfn)
 {
 	pmd_t *kernel_pmd;
 
-	level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+	initial_kernel_pmd =
+		extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
 
 	max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
 				  xen_start_info->nr_pt_frames * PAGE_SIZE +
 				  512*1024);
 
 	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
-	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+	memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
 
-	xen_map_identity_early(level2_kernel_pgt, max_pfn);
+	xen_map_identity_early(initial_kernel_pmd, max_pfn);
 
-	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
-	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
-			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+	memcpy(initial_page_table, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	initial_page_table[KERNEL_PGD_BOUNDARY] =
+		__pgd(__pa(initial_kernel_pmd) | _PAGE_PRESENT);
 
-	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	set_page_prot(initial_kernel_pmd, PAGE_KERNEL_RO);
+	set_page_prot(initial_page_table, PAGE_KERNEL_RO);
 	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
 
 	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-	xen_write_cr3(__pa(swapper_pg_dir));
-
-	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE,
+			  PFN_DOWN(__pa(initial_page_table)));
+	xen_write_cr3(__pa(initial_page_table));
 
 	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
 		      __pa(xen_start_info->pt_base +
 			   xen_start_info->nr_pt_frames * PAGE_SIZE),
 		      "XEN PAGETABLES");
 
-	return swapper_pg_dir;
+	return initial_page_table;
 }
 #endif	/* CONFIG_X86_64 */
 
@@ -2304,7 +2343,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.write_cr2 = xen_write_cr2,
 
 	.read_cr3 = xen_read_cr3,
+#ifdef CONFIG_X86_32
+	.write_cr3 = xen_write_cr3_init,
+#else
 	.write_cr3 = xen_write_cr3,
+#endif
 
 	.flush_tlb_user = xen_flush_tlb,
 	.flush_tlb_kernel = xen_flush_tlb,
-- 
1.5.6.5


             reply	other threads:[~2010-11-24 12:09 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-24 12:09 Ian Campbell [this message]
2010-11-24 18:19 ` Jeremy Fitzhardinge
2010-11-24 20:01   ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1290600581-8392-1-git-send-email-ian.campbell@citrix.com \
    --to=ian.campbell@citrix.com \
    --cc=bp@alien8.de \
    --cc=hpa@linux.intel.com \
    --cc=jeremy@goop.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome