From: Pekka Enberg <penberg@kernel.org>
To: gregkh@suse.de
Cc: linux-kernel@vger.kernel.org, Pekka Enberg <penberg@kernel.org>,
Pavel Machek <pavel@ucw.cz>
Subject: [PATCH 05/13] w35und: Use pr_debug() for debugging
Date: Sun, 28 Nov 2010 23:00:00 +0200 [thread overview]
Message-ID: <1290978008-29095-5-git-send-email-penberg@kernel.org> (raw)
In-Reply-To: <1290978008-29095-1-git-send-email-penberg@kernel.org>
Use pr_debug() for debugging printk's and kill the FULL_DEBUG macro. It would
be even better to use dev_dbg() but unfortunately looking up struct device in
the current code structure makes things very ugly.
Please note that I dropped the DataDmp() calls from
RFSynthesizer_SwitchingChannel() because that function doesn't exist.
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
---
drivers/staging/winbond/mds.c | 16 ++++------------
drivers/staging/winbond/reg.c | 27 +++++----------------------
drivers/staging/winbond/sysdef.h | 12 ------------
drivers/staging/winbond/wb35reg.c | 20 +++++---------------
drivers/staging/winbond/wb35rx.c | 21 +++++----------------
drivers/staging/winbond/wb35tx.c | 16 ++++------------
drivers/staging/winbond/wbusb.c | 13 +++----------
7 files changed, 26 insertions(+), 99 deletions(-)
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index 90f2cc0..8ae3d84 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -346,9 +346,7 @@ static void Mds_HeaderCopy(struct wbsoft_priv *adapter, struct wb35_descriptor *
ctmp1 = ctmpf = CURRENT_TX_RATE_FOR_MNG;
pDes->TxRate = ctmp1;
- #ifdef _PE_TX_DUMP_
- printk("Tx rate =%x\n", ctmp1);
- #endif
+ pr_debug("Tx rate =%x\n", ctmp1);
pT01->T01_modulation_type = (ctmp1%3) ? 0 : 1;
@@ -426,9 +424,7 @@ Mds_Tx(struct wbsoft_priv *adapter)
do {
FillIndex = pMds->TxFillIndex;
if (pMds->TxOwner[FillIndex]) { /* Is owned by software 0:Yes 1:No */
-#ifdef _PE_TX_DUMP_
- printk("[Mds_Tx] Tx Owner is H/W.\n");
-#endif
+ pr_debug("[Mds_Tx] Tx Owner is H/W.\n");
break;
}
@@ -472,9 +468,7 @@ Mds_Tx(struct wbsoft_priv *adapter)
/* For speed up Key setting */
if (pTxDes->EapFix) {
-#ifdef _PE_TX_DUMP_
- printk("35: EPA 4th frame detected. Size = %d\n", PacketSize);
-#endif
+ pr_debug("35: EPA 4th frame detected. Size = %d\n", PacketSize);
pHwData->IsKeyPreSet = 1;
}
@@ -563,9 +557,7 @@ Mds_SendComplete(struct wbsoft_priv *adapter, struct T02_descriptor *pT02)
pHwData->tx_retry_count[RetryCount] += RetryCount;
else
pHwData->tx_retry_count[7] += RetryCount;
- #ifdef _PE_STATE_DUMP_
- printk("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count);
- #endif
+ pr_debug("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count);
MTO_SetTxCount(adapter, TxRate, RetryCount);
}
pHwData->dto_tx_frag_count += (RetryCount+1);
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 439d213..dcd7560 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1012,9 +1012,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
case RF_AIROHA_7230:
/* Start to fill RF parameters, PLL_ON should be pulled low. */
Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON low\n");
- #endif
+ pr_debug("* PLL_ON low\n");
number = ARRAY_SIZE(al7230_rf_data_24);
Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
break;
@@ -1100,9 +1098,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
case RF_AIROHA_7230:
/* RF parameters have filled completely, PLL_ON should be pulled high */
Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON high\n");
- #endif
+ pr_debug("* PLL_ON high\n");
/* 2.4GHz */
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
@@ -1117,9 +1113,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
/* 5GHz */
Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON low\n");
- #endif
+ pr_debug("* PLL_ON low\n");
number = ARRAY_SIZE(al7230_rf_data_50);
Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
@@ -1129,9 +1123,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
msleep(5);
Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON high\n");
- #endif
+ pr_debug("* PLL_ON high\n");
ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
@@ -1797,9 +1789,7 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData, struct chan_info C
/* Write to register. number must less and equal than 16 */
Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, number, NO_INCREMENT);
- #ifdef _PE_STATE_DUMP_
- printk("Band changed\n");
- #endif
+ pr_debug("Band changed\n");
}
if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
@@ -2338,13 +2328,6 @@ void EEPROMTxVgaAdjust(struct hw_data *pHwData)
pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp * 2 / 4;
pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp * 3 / 4;
}
-
- #ifdef _PE_STATE_DUMP_
- printk(" TxVgaFor24 :\n");
- DataDmp((u8 *)pHwData->TxVgaFor24, 14 , 0);
- printk(" TxVgaFor50 :\n");
- DataDmp((u8 *)pHwData->TxVgaFor50, 70 , 0);
- #endif
}
void BBProcessor_RateChanging(struct hw_data *pHwData, u8 rate)
diff --git a/drivers/staging/winbond/sysdef.h b/drivers/staging/winbond/sysdef.h
index 8d4ebe1..04e6e8f 100644
--- a/drivers/staging/winbond/sysdef.h
+++ b/drivers/staging/winbond/sysdef.h
@@ -3,16 +3,4 @@
#ifndef SYS_DEF_H
#define SYS_DEF_H
-/* debug print options, mark what debug you don't need */
-
-#ifdef FULL_DEBUG
-#define _PE_STATE_DUMP_
-#define _PE_TX_DUMP_
-#define _PE_RX_DUMP_
-#define _PE_OID_DUMP_
-#define _PE_DTO_DUMP_
-#define _PE_REG_DUMP_
-#define _PE_USB_INI_DUMP_
-#endif
-
#endif
diff --git a/drivers/staging/winbond/wb35reg.c b/drivers/staging/winbond/wb35reg.c
index 7707223..f33f4f8 100644
--- a/drivers/staging/winbond/wb35reg.c
+++ b/drivers/staging/winbond/wb35reg.c
@@ -150,9 +150,7 @@ unsigned char Wb35Reg_WriteSync(struct hw_data *pHwData, u16 RegisterNo, u32 Reg
Wb35Reg_EP0VM_start(pHwData);
if (ret < 0) {
-#ifdef _PE_REG_DUMP_
- printk("EP0 Write register usb message sending error\n");
-#endif
+ pr_debug("EP0 Write register usb message sending error\n");
pHwData->SurpriseRemove = 1;
return false;
}
@@ -320,9 +318,7 @@ unsigned char Wb35Reg_ReadSync(struct hw_data *pHwData, u16 RegisterNo, u32 *pRe
Wb35Reg_EP0VM_start(pHwData);
if (ret < 0) {
-#ifdef _PE_REG_DUMP_
- printk("EP0 Read register usb message sending error\n");
-#endif
+ pr_debug("EP0 Read register usb message sending error\n");
pHwData->SurpriseRemove = 1;
return false;
}
@@ -442,9 +438,7 @@ void Wb35Reg_EP0VM(struct hw_data *pHwData)
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret < 0) {
-#ifdef _PE_REG_DUMP_
- printk("EP0 Irp sending error\n");
-#endif
+ pr_debug("EP0 Irp sending error\n");
goto cleanup;
}
return;
@@ -479,9 +473,7 @@ void Wb35Reg_EP0VM_complete(struct urb *urb)
spin_unlock_irq(®->EP0VM_spin_lock);
if (reg->EP0VM_status) {
-#ifdef _PE_REG_DUMP_
- printk("EP0 IoCompleteRoutine return error\n");
-#endif
+ pr_debug("EP0 IoCompleteRoutine return error\n");
reg->EP0vm_state = VM_STOP;
pHwData->SurpriseRemove = 1;
} else {
@@ -526,9 +518,7 @@ void Wb35Reg_destroy(struct hw_data *pHwData)
usb_free_urb(urb);
kfree(reg_queue);
} else {
-#ifdef _PE_REG_DUMP_
- printk("EP0 queue release error\n");
-#endif
+ pr_debug("EP0 queue release error\n");
}
spin_lock_irq(®->EP0VM_spin_lock);
diff --git a/drivers/staging/winbond/wb35rx.c b/drivers/staging/winbond/wb35rx.c
index 5af271f..0255728 100644
--- a/drivers/staging/winbond/wb35rx.c
+++ b/drivers/staging/winbond/wb35rx.c
@@ -109,10 +109,7 @@ static u16 Wb35Rx_indicate(struct ieee80211_hw *hw)
/* Basic check for Rx length. Is length valid? */
if (PacketSize > MAX_PACKET_SIZE) {
-#ifdef _PE_RX_DUMP_
- printk("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
-#endif
-
+ pr_debug("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
pWb35Rx->EP3vm_state = VM_STOP;
pWb35Rx->Ep3ErrorCount2++;
break;
@@ -186,9 +183,7 @@ static void Wb35Rx_Complete(struct urb *urb)
/* The URB is completed, check the result */
if (pWb35Rx->EP3VM_status != 0) {
-#ifdef _PE_USB_STATE_DUMP_
- printk("EP3 IoCompleteRoutine return error\n");
-#endif
+ pr_debug("EP3 IoCompleteRoutine return error\n");
pWb35Rx->EP3vm_state = VM_STOP;
goto error;
}
@@ -249,9 +244,7 @@ static void Wb35Rx(struct ieee80211_hw *hw)
RxBufferId = pWb35Rx->RxBufferId;
if (!pWb35Rx->RxOwner[RxBufferId]) {
/* It's impossible to run here. */
-#ifdef _PE_RX_DUMP_
- printk("Rx driver fifo unavailable\n");
-#endif
+ pr_debug("Rx driver fifo unavailable\n");
goto error;
}
@@ -337,9 +330,7 @@ void Wb35Rx_stop(struct hw_data *pHwData)
/* Canceling the Irp if already sends it out. */
if (pWb35Rx->EP3vm_state == VM_RUNNING) {
usb_unlink_urb(pWb35Rx->RxUrb); /* Only use unlink, let Wb35Rx_destroy to free them */
-#ifdef _PE_RX_DUMP_
- printk("EP3 Rx stop\n");
-#endif
+ pr_debug("EP3 Rx stop\n");
}
}
@@ -355,8 +346,6 @@ void Wb35Rx_destroy(struct hw_data *pHwData)
if (pWb35Rx->RxUrb)
usb_free_urb(pWb35Rx->RxUrb);
-#ifdef _PE_RX_DUMP_
- printk("Wb35Rx_destroy OK\n");
-#endif
+ pr_debug("Wb35Rx_destroy OK\n");
}
diff --git a/drivers/staging/winbond/wb35tx.c b/drivers/staging/winbond/wb35tx.c
index fd52554..8f0d527 100644
--- a/drivers/staging/winbond/wb35tx.c
+++ b/drivers/staging/winbond/wb35tx.c
@@ -153,16 +153,12 @@ void Wb35Tx_stop(struct hw_data * pHwData)
// Trying to canceling the Trp of EP2
if (pWb35Tx->EP2vm_state == VM_RUNNING)
usb_unlink_urb( pWb35Tx->Tx2Urb ); // Only use unlink, let Wb35Tx_destrot to free them
- #ifdef _PE_TX_DUMP_
- printk("EP2 Tx stop\n");
- #endif
+ pr_debug("EP2 Tx stop\n");
// Trying to canceling the Irp of EP4
if (pWb35Tx->EP4vm_state == VM_RUNNING)
usb_unlink_urb( pWb35Tx->Tx4Urb ); // Only use unlink, let Wb35Tx_destrot to free them
- #ifdef _PE_TX_DUMP_
- printk("EP4 Tx stop\n");
- #endif
+ pr_debug("EP4 Tx stop\n");
}
//======================================================
@@ -182,9 +178,7 @@ void Wb35Tx_destroy(struct hw_data * pHwData)
if (pWb35Tx->Tx2Urb)
usb_free_urb( pWb35Tx->Tx2Urb );
- #ifdef _PE_TX_DUMP_
- printk("Wb35Tx_destroy OK\n");
- #endif
+ pr_debug("Wb35Tx_destroy OK\n");
}
void Wb35Tx_CurrentTime(struct wbsoft_priv *adapter, u32 TimeCount)
@@ -279,9 +273,7 @@ static void Wb35Tx_EP2VM(struct wbsoft_priv *adapter)
retv = usb_submit_urb(pUrb, GFP_ATOMIC);
if (retv < 0) {
- #ifdef _PE_TX_DUMP_
- printk("EP2 Tx Irp sending error\n");
- #endif
+ pr_debug("EP2 Tx Irp sending error\n");
goto error;
}
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index dcb6d5b..5f54b0f 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -184,10 +184,7 @@ static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info
RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */
pHwData->Channel = channel.ChanNo;
pHwData->band = channel.band;
-#ifdef _PE_STATE_DUMP_
- printk("Set channel is %d, band =%d\n", pHwData->Channel,
- pHwData->band);
-#endif
+ pr_debug("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band);
reg->M28_MacControl &= ~0xff; /* Clean channel information field */
reg->M28_MacControl |= channel.ChanNo;
Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl,
@@ -728,9 +725,7 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
}
priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
-#ifdef _PE_STATE_DUMP_
- printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
-#endif
+ pr_debug("Driver init, antenna no = %d\n", priv->sLocalPara.bAntennaNo);
hal_get_hw_radio_off(pHwData);
/* Waiting for HAL setting OK */
@@ -856,9 +851,7 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
{
/* Turn off Rx and Tx hardware ability */
hal_stop(&adapter->sHwData);
-#ifdef _PE_USB_INI_DUMP_
- printk("[w35und] Hal_stop O.K.\n");
-#endif
+ pr_debug("[w35und] Hal_stop O.K.\n");
/* Waiting Irp completed */
msleep(100);
--
1.7.0.4
next prev parent reply other threads:[~2010-11-28 21:02 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-28 20:59 [PATCH 01/13] w35und: Remove unused defines from sysdef.h Pekka Enberg
2010-11-28 20:59 ` [PATCH 02/13] w35und: Kill _USE_FALLBACK_RATE_ macro Pekka Enberg
2010-11-28 20:59 ` [PATCH 03/13] w35und: Kill WPA2 definitions Pekka Enberg
2010-11-28 20:59 ` [PATCH 04/13] w35und: Kill unused code in mac_structures.h Pekka Enberg
2010-11-28 21:00 ` Pekka Enberg [this message]
2010-11-28 21:00 ` [PATCH 06/13] w35und: Remove empty sysdef.h header Pekka Enberg
2010-11-28 21:00 ` [PATCH 07/13] w35und: Kill Vendor2 ifdef from hal_init_hardware Pekka Enberg
2010-11-28 21:00 ` [PATCH 08/13] w35und: Kill write-only ->TxToggle Pekka Enberg
2010-11-28 21:00 ` [PATCH 09/13] w35und: Kill _IBSS_BEACON_SEQ_STICK_ Pekka Enberg
2010-11-28 21:00 ` [PATCH 10/13] w35und: Merge mlmetxrx.c to mds.c Pekka Enberg
2010-11-28 21:00 ` [PATCH 11/13] w35und: Kill wblinux_f.h header Pekka Enberg
2010-11-28 21:00 ` [PATCH 12/13] w35und: Remove unused fields from struct wb_usb Pekka Enberg
2010-11-28 21:00 ` [PATCH 13/13] w35und: Kill " Pekka Enberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290978008-29095-5-git-send-email-penberg@kernel.org \
--to=penberg@kernel.org \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome