[PATCH 1/3] staging/sep: Fix sparse warning 'do-while statement is not a compound statement'

[Peter Huewe <peterhuewe@gmx.de>]

This patch fixes the warning generated by sparse: 'do-while statement is
not a compound statement' by adding the necessary brackets around the do
block

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
---
KernelVersion: linux-next-20101202

 drivers/staging/sep/sep_dev.h    |    4 ++--
 drivers/staging/sep/sep_driver.c |   12 ++++++------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/sep/sep_dev.h b/drivers/staging/sep/sep_dev.h
index 7b4993b..0ffe68c 100644
--- a/drivers/staging/sep/sep_dev.h
+++ b/drivers/staging/sep/sep_dev.h
@@ -147,9 +147,9 @@ static inline u32 sep_read_reg(struct sep_device *dev, int reg)
 static inline void sep_wait_sram_write(struct sep_device *dev)
 {
 	u32 reg_val;
-	do
+	do {
 		reg_val = sep_read_reg(dev, HW_SRAM_DATA_READY_REG_ADDR);
-	while (!(reg_val & 1));
+	} while (!(reg_val & 1));
 }
 
 
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
index 7633111..d734887 100644
--- a/drivers/staging/sep/sep_driver.c
+++ b/drivers/staging/sep/sep_driver.c
@@ -2587,9 +2587,9 @@ static int sep_start_handler(struct sep_device *sep)
 	dev_dbg(&sep->pdev->dev, "sep_start_handler start\n");
 
 	/* Wait in polling for message from SEP */
-	do
+	do {
 		reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
-	while (!reg_val);
+	} while (!reg_val);
 
 	/* Check the value */
 	if (reg_val == 0x1)
@@ -2754,9 +2754,9 @@ static int sep_init_handler(struct sep_device *sep, unsigned long arg)
 	/* Wait for acknowledge */
 	dev_dbg(&sep->pdev->dev, "init; waiting for msg response\n");
 
-	do
+	do {
 		reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
-	while (!(reg_val & 0xFFFFFFFD));
+	} while (!(reg_val & 0xFFFFFFFD));
 
 	if (reg_val == 0x1) {
 		dev_warn(&sep->pdev->dev, "init; device int failed\n");
@@ -2774,9 +2774,9 @@ static int sep_init_handler(struct sep_device *sep, unsigned long arg)
 	/* Wait for response */
 	dev_dbg(&sep->pdev->dev, "init; waiting for zero set response\n");
 
-	do
+	do {
 		reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
-	while (reg_val != 0);
+	} while (reg_val != 0);
 
 end_function:
 	dev_dbg(&sep->pdev->dev, "init is done\n");
-- 
1.7.2.2