mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexey Dobriyan <adobriyan@gmail.com>
To: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org, Alexey Dobriyan <adobriyan@gmail.com>
Subject: [PATCH 32/45] kstrtox: convert drivers/net/
Date: Sun,  5 Dec 2010 19:49:29 +0200	[thread overview]
Message-ID: <1291571382-2719-32-git-send-email-adobriyan@gmail.com> (raw)
In-Reply-To: <1291571382-2719-1-git-send-email-adobriyan@gmail.com>


Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
 drivers/net/can/janz-ican3.c         |    5 +++--
 drivers/net/netxen/netxen_nic_main.c |    4 ++--
 drivers/net/qlcnic/qlcnic_main.c     |    4 ++--
 drivers/net/stmmac/stmmac_main.c     |   29 ++++++++++++++++-------------
 4 files changed, 23 insertions(+), 19 deletions(-)

diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 6e533dc..51fd497 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -1617,8 +1617,9 @@ static ssize_t ican3_sysfs_set_term(struct device *dev,
 	unsigned long enable;
 	int ret;
 
-	if (strict_strtoul(buf, 0, &enable))
-		return -EINVAL;
+	ret = kstrtoul(buf, 0, &enable);
+	if (ret < 0)
+		return ret;
 
 	ret = ican3_set_termination(mod, enable);
 	if (ret)
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index e1d30d7..b2c79e7 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -2503,7 +2503,7 @@ netxen_store_bridged_mode(struct device *dev,
 	if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
 		goto err_out;
 
-	if (strict_strtoul(buf, 2, &new))
+	if (kstrtoul(buf, 2, &new))
 		goto err_out;
 
 	if (!netxen_config_bridged_mode(adapter, !!new))
@@ -2542,7 +2542,7 @@ netxen_store_diag_mode(struct device *dev,
 	struct netxen_adapter *adapter = dev_get_drvdata(dev);
 	unsigned long new;
 
-	if (strict_strtoul(buf, 2, &new))
+	if (kstrtoul(buf, 2, &new))
 		return -EINVAL;
 
 	if (!!new != !!(adapter->flags & NETXEN_NIC_DIAG_ENABLED))
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index a3dcd04..5c4e2db 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -3262,7 +3262,7 @@ qlcnic_store_bridged_mode(struct device *dev,
 	if (!test_bit(__QLCNIC_DEV_UP, &adapter->state))
 		goto err_out;
 
-	if (strict_strtoul(buf, 2, &new))
+	if (kstrtoul(buf, 2, &new))
 		goto err_out;
 
 	if (!adapter->nic_ops->config_bridged_mode(adapter, !!new))
@@ -3298,7 +3298,7 @@ qlcnic_store_diag_mode(struct device *dev,
 	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
 	unsigned long new;
 
-	if (strict_strtoul(buf, 2, &new))
+	if (kstrtoul(buf, 2, &new))
 		return -EINVAL;
 
 	if (!!new != !!(adapter->flags & QLCNIC_DIAG_ENABLED))
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 06bc603..8190289 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1934,31 +1934,34 @@ static int __init stmmac_cmdline_opt(char *str)
 	if (!str || !*str)
 		return -EINVAL;
 	while ((opt = strsep(&str, ",")) != NULL) {
+		int rv;
+
 		if (!strncmp(opt, "debug:", 6))
-			strict_strtoul(opt + 6, 0, (unsigned long *)&debug);
+			rv = kstrtoint(opt + 6, 0, &debug);
 		else if (!strncmp(opt, "phyaddr:", 8))
-			strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr);
+			rv = kstrtoint(opt + 8, 0, &phyaddr);
 		else if (!strncmp(opt, "dma_txsize:", 11))
-			strict_strtoul(opt + 11, 0,
-				       (unsigned long *)&dma_txsize);
+			rv = kstrtoint(opt + 11, 0, &dma_txsize);
 		else if (!strncmp(opt, "dma_rxsize:", 11))
-			strict_strtoul(opt + 11, 0,
-				       (unsigned long *)&dma_rxsize);
+			rv = kstrtoint(opt + 11, 0, &dma_rxsize);
 		else if (!strncmp(opt, "buf_sz:", 7))
-			strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz);
+			rv = kstrtoint(opt + 7, 0, &buf_sz);
 		else if (!strncmp(opt, "tc:", 3))
-			strict_strtoul(opt + 3, 0, (unsigned long *)&tc);
+			rv = kstrtoint(opt + 3, 0, &tc);
 		else if (!strncmp(opt, "watchdog:", 9))
-			strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog);
+			rv = kstrtoint(opt + 9, 0, &watchdog);
 		else if (!strncmp(opt, "flow_ctrl:", 10))
-			strict_strtoul(opt + 10, 0,
-				       (unsigned long *)&flow_ctrl);
+			rv = kstrtoint(opt + 10, 0, &flow_ctrl);
 		else if (!strncmp(opt, "pause:", 6))
-			strict_strtoul(opt + 6, 0, (unsigned long *)&pause);
+			rv = kstrtoint(opt + 6, 0, &pause);
 #ifdef CONFIG_STMMAC_TIMER
 		else if (!strncmp(opt, "tmrate:", 7))
-			strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate);
+			rv = kstrtoint(opt + 7, 0, &tmrate);
 #endif
+		else
+			rv = -EINVAL;
+		if (rv < 0)
+			return rv;
 	}
 	return 0;
 }
-- 
1.7.2.2


  parent reply	other threads:[~2010-12-05 17:54 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-05 17:48 [PATCH 01/45] kstrtox: converting strings to integers done (hopefully) right Alexey Dobriyan
2010-12-05 17:48 ` [PATCH 02/45] kstrtox: convert arch/x86/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 03/45] kstrtox: convert arch/arm/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 04/45] kstrtox: convert kernel/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 05/45] kstrtox: kernel/trace/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 06/45] kstrtox: convert mm/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 07/45] kstrtox: convert fs/fuse/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 08/45] kstrtox: convert fs/nfs/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 09/45] kstrtox: convert fs/proc/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 10/45] kstrtox: convert security/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 11/45] kstrtox: convert block/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 12/45] kstrtox: convert drivers/acpi/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 13/45] kstrtox: convert drivers/ata/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 14/45] kstrtox: convert drivers/base/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 15/45] kstrtox: convert drivers/block/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 16/45] kstrtox: convert drivers/bluetooth/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 17/45] kstrtox: convert drivers/clocksource/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 18/45] kstrtox: convert drivers/edac/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 19/45] kstrtox: convert drivers/gpio/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 20/45] kstrtox: convert drivers/gpu/drm/nouveau/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 21/45] kstrtox: convert drivers/hid/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 22/45] kstrtox: convert drivers/hwmon/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 23/45] kstrtox: convert drivers/ide/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 24/45] kstrtox: convert drivers/infiniband/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 25/45] kstrtox: convert drivers/input/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 26/45] kstrtox: convert drivers/isdn/ Alexey Dobriyan
2010-12-06  0:10   ` Tilman Schmidt
2010-12-06 20:10     ` Alexey Dobriyan
2010-12-07 10:06       ` Tilman Schmidt
2010-12-05 17:49 ` [PATCH 27/45] kstrtox: convert drivers/leds/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 28/45] kstrtox: convert drivers/md/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 29/45] kstrtox: convert drivers/mfd/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 30/45] kstrtox: convert drivers/misc/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 31/45] kstrtox: convert drivers/mmc/ Alexey Dobriyan
2010-12-05 17:49 ` Alexey Dobriyan [this message]
2010-12-05 17:49 ` [PATCH 33/45] kstrtox: convert drivers/net/wireless/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 34/45] kstrtox: convert drivers/pci/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 35/45] kstrtox: convert drivers/platform/x86/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 36/45] kstrtox: convert drivers/power/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 37/45] kstrtox: convert drivers/regulator/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 38/45] kstrtox: convert drivers/rtc/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 39/45] kstrtox: convert drivers/scsi/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 40/45] kstrtox: convert drivers/ssb/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 41/45] kstrtox: convert drivers/usb/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 42/45] kstrtox: convert drivers/video/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 43/45] kstrtox: convert drivers/w1/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 44/45] kstrtox: convert sound/ Alexey Dobriyan
2010-12-05 17:49 ` [PATCH 45/45] kstrtox: convert net/ Alexey Dobriyan
2010-12-06  0:25 ` [PATCH 01/45] kstrtox: converting strings to integers done (hopefully) right Jesper Juhl
2010-12-06 15:16   ` Alexey Dobriyan
2010-12-07  9:04     ` Arnd Bergmann
2010-12-07  9:32       ` Alexey Dobriyan
2010-12-07  9:45         ` Arnd Bergmann
2010-12-08  8:51           ` Alexey Dobriyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1291571382-2719-32-git-send-email-adobriyan@gmail.com \
    --to=adobriyan@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome