mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Henrik Rydberg" <rydberg@euromail.se>
To: Jiri Kosina <jkosina@suse.cz>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Philipp Merkel <mail@philmerk.de>,
	Stephane Chatty <chatty@enac.fr>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Henrik Rydberg <rydberg@euromail.se>
Subject: [PATCH v3] hid: egalax: Convert to MT slots
Date: Tue,  7 Dec 2010 12:54:11 +0100	[thread overview]
Message-ID: <1291722851-22909-1-git-send-email-rydberg@euromail.se> (raw)

The firmware in the joojoo reports touches sequentially, one per
report, which confuses the current driver. A further complication is
the absense of any indication of a touch frame. This patch converts
the driver to the MT slots protocol, and outputs one full touch frame
per report. This way, proper handling for both firmwares is ensured.

Tested-by: Philipp Merkel <mail@philmerk.de>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
---
Hi Jiri,

This is revision three of the patch, with one line changed to accomodate
the explicit use of tool types. The rest of the patch set is intact.

Thanks,
Henrik

 drivers/hid/hid-egalax.c |   86 ++++++++++++---------------------------------
 1 files changed, 23 insertions(+), 63 deletions(-)

diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
index 5da5ecb..725a5b0 100644
--- a/drivers/hid/hid-egalax.c
+++ b/drivers/hid/hid-egalax.c
@@ -2,6 +2,8 @@
  *  HID driver for eGalax dual-touch panels
  *
  *  Copyright (c) 2010 Stephane Chatty <chatty@enac.fr>
+ *  Copyright (c) 2010 Henrik Rydberg <rydberg@euromail.se>
+ *  Copyright (c) 2010 Canonical, Ltd.
  *
  */
 
@@ -16,6 +18,7 @@
 #include <linux/hid.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/input-mt.h>
 #include <linux/slab.h>
 #include "usbhid/usbhid.h"
 
@@ -25,17 +28,17 @@ MODULE_LICENSE("GPL");
 
 #include "hid-ids.h"
 
+#define MAX_SLOTS		2
+
 /* estimated signal-to-noise ratios */
 #define SN_MOVE			4096
 #define SN_PRESSURE		32
 
 struct egalax_data {
-	__u16 x, y, z;
-	__u8 id;
-	bool first;		/* is this the first finger in the frame? */
-	bool valid;		/* valid finger data, or just placeholder? */
-	bool activity;		/* at least one active finger previously? */
-	__u16 lastx, lasty, lastz;	/* latest valid (x, y, z) in the frame */
+	int valid;
+	int slot;
+	int touch;
+	int x, y, z;
 };
 
 static void set_abs(struct input_dev *input, unsigned int code,
@@ -89,9 +92,7 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		case HID_DG_CONTACTMAX:
 			return -1;
 		case HID_DG_CONTACTID:
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_TRACKING_ID);
-			set_abs(input, ABS_MT_TRACKING_ID, field, 0);
+			input_mt_init_slots(input, MAX_SLOTS);
 			return 1;
 		case HID_DG_TIPPRESSURE:
 			field->logical_minimum = 0;
@@ -125,58 +126,16 @@ static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi,
  */
 static void egalax_filter_event(struct egalax_data *td, struct input_dev *input)
 {
-	td->first = !td->first; /* touchscreen emulation */
-
-	if (td->valid) {
-		/* emit multitouch events */
-		input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
-		input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x >> 3);
-		input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y >> 3);
+	input_mt_slot(input, td->slot);
+	input_mt_report_slot_state(input, MT_TOOL_FINGER, td->touch);
+	if (td->touch) {
+		input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+		input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
 		input_event(input, EV_ABS, ABS_MT_PRESSURE, td->z);
-
-		input_mt_sync(input);
-
-		/*
-		 * touchscreen emulation: store (x, y) as
-		 * the last valid values in this frame
-		 */
-		td->lastx = td->x;
-		td->lasty = td->y;
-		td->lastz = td->z;
-	}
-
-	/*
-	 * touchscreen emulation: if this is the second finger and at least
-	 * one in this frame is valid, the latest valid in the frame is
-	 * the oldest on the panel, the one we want for single touch
-	 */
-	if (!td->first && td->activity) {
-		input_event(input, EV_ABS, ABS_X, td->lastx >> 3);
-		input_event(input, EV_ABS, ABS_Y, td->lasty >> 3);
- 		input_event(input, EV_ABS, ABS_PRESSURE, td->lastz);
-	}
-
-	if (!td->valid) {
-		/*
-		 * touchscreen emulation: if the first finger is invalid
-		 * and there previously was finger activity, this is a release
-		 */ 
-		if (td->first && td->activity) {
-			input_event(input, EV_KEY, BTN_TOUCH, 0);
-			td->activity = false;
-		}
-		return;
-	}
-
-
-	/* touchscreen emulation: if no previous activity, emit touch event */
-	if (!td->activity) {
-		input_event(input, EV_KEY, BTN_TOUCH, 1);
-		td->activity = true;
 	}
+	input_mt_report_pointer_emulation(input);
 }
 
-
 static int egalax_event(struct hid_device *hid, struct hid_field *field,
 				struct hid_usage *usage, __s32 value)
 {
@@ -186,25 +145,26 @@ static int egalax_event(struct hid_device *hid, struct hid_field *field,
 	 * uses a standard parallel multitouch protocol (product ID ==
 	 * 48xx).  The second is capacitive and uses an unusual "serial"
 	 * protocol with a different message for each multitouch finger
-	 * (product ID == 72xx).  We do not yet generate a correct event
-	 * sequence for the capacitive/serial protocol.
+	 * (product ID == 72xx).
 	 */
 	if (hid->claimed & HID_CLAIMED_INPUT) {
 		struct input_dev *input = field->hidinput->input;
 
 		switch (usage->hid) {
 		case HID_DG_INRANGE:
+			td->valid = value;
+			break;
 		case HID_DG_CONFIDENCE:
 			/* avoid interference from generic hidinput handling */
 			break;
 		case HID_DG_TIPSWITCH:
-			td->valid = value;
+			td->touch = value;
 			break;
 		case HID_DG_TIPPRESSURE:
 			td->z = value;
 			break;
 		case HID_DG_CONTACTID:
-			td->id = value;
+			td->slot = clamp_val(value, 0, MAX_SLOTS - 1);
 			break;
 		case HID_GD_X:
 			td->x = value;
@@ -212,11 +172,11 @@ static int egalax_event(struct hid_device *hid, struct hid_field *field,
 		case HID_GD_Y:
 			td->y = value;
 			/* this is the last field in a finger */
-			egalax_filter_event(td, input);
+			if (td->valid)
+				egalax_filter_event(td, input);
 			break;
 		case HID_DG_CONTACTCOUNT:
 			/* touch emulation: this is the last field in a frame */
-			td->first = false;
 			break;
 
 		default:
-- 
1.7.1


             reply	other threads:[~2010-12-07 11:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-07 11:54 Henrik Rydberg [this message]
2010-12-07 14:54 ` Jiri Kosina
2010-12-07 20:06   ` Henrik Rydberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1291722851-22909-1-git-send-email-rydberg@euromail.se \
    --to=rydberg@euromail.se \
    --cc=chatty@enac.fr \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jkosina@suse.cz \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mail@philmerk.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®