mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ike Panhc <ike.pan@canonical.com>
To: linux-kernel@vger.kernel.org,
	platform-driver-x86@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Matthew Garrett <mjg@redhat.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Dave Hansen <dave@linux.vnet.ibm.com>
Subject: [PATCH 2/7] ideapad: let camera power control entry under platform driver
Date: Thu,  9 Dec 2010 15:56:59 +0800	[thread overview]
Message-ID: <1291881419-4788-1-git-send-email-ike.pan@canonical.com> (raw)
In-Reply-To: <1291881376-4729-1-git-send-email-ike.pan@canonical.com>

The entry was at /sys/devices/LNXSYSTM:00/../VPC2004:00/camera_power
move to /sys/devices/platform/Ideapad/camera_power

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
---
 drivers/platform/x86/ideapad-laptop.c |   55 +++++++++++++++------------------
 1 files changed, 25 insertions(+), 30 deletions(-)

diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 62901e9..a6d3e04 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -282,6 +282,15 @@ static void ideapad_unregister_rfkill(struct acpi_device *adevice, int dev)
 /*
  * Platform device
  */
+static struct attribute *ideapad_attributes[] = {
+	&dev_attr_camera_power.attr,
+	NULL
+};
+
+static struct attribute_group ideapad_attribute_group = {
+	.attrs = ideapad_attributes
+};
+
 static int __devinit ideapad_platform_init(void)
 {
 	int result;
@@ -295,8 +304,14 @@ static int __devinit ideapad_platform_init(void)
 	if (result)
 		goto fail_platform_device;
 
+	result = sysfs_create_group(&ideapad_priv->platform_device->dev.kobj,
+				    &ideapad_attribute_group);
+	if (result)
+		goto fail_sysfs;
 	return 0;
 
+fail_sysfs:
+	platform_device_del(ideapad_priv->platform_device);
 fail_platform_device:
 	platform_device_put(ideapad_priv->platform_device);
 	return result;
@@ -304,6 +319,8 @@ fail_platform_device:
 
 static void ideapad_platform_exit(void)
 {
+	sysfs_remove_group(&ideapad_priv->platform_device->dev.kobj,
+			   &ideapad_attribute_group);
 	platform_device_unregister(ideapad_priv->platform_device);
 }
 /* the above is platform device */
@@ -317,50 +334,30 @@ MODULE_DEVICE_TABLE(acpi, ideapad_device_ids);
 static int ideapad_acpi_add(struct acpi_device *adevice)
 {
 	int ret, i, cfg;
-	int devs_present[5];
 	struct ideapad_private *priv;
 
 	if (read_method_int(adevice->handle, "_CFG", &cfg))
 		return -ENODEV;
 
-	for (i = IDEAPAD_DEV_CAMERA; i < IDEAPAD_DEV_KILLSW; i++) {
-		if (test_bit(ideapad_rfk_data[i].cfgbit, (unsigned long *)&cfg))
-			devs_present[i] = 1;
-		else
-			devs_present[i] = 0;
-	}
-
-	/* The hardware switch is always present */
-	devs_present[IDEAPAD_DEV_KILLSW] = 1;
-
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 	ideapad_priv = priv;
+	priv->handle = adevice->handle;
+	dev_set_drvdata(&adevice->dev, priv);
 
 	ret = ideapad_platform_init();
 	if (ret)
 		goto platform_failed;
 
-	if (devs_present[IDEAPAD_DEV_CAMERA]) {
-		ret = device_create_file(&adevice->dev, &dev_attr_camera_power);
-		if (ret)
-			goto camera_failed;
-	}
-
-	priv->handle = adevice->handle;
-	dev_set_drvdata(&adevice->dev, priv);
-	for (i = IDEAPAD_DEV_WLAN; i <= IDEAPAD_DEV_KILLSW; i++) {
-		if (!devs_present[i])
-			continue;
-
-		ideapad_register_rfkill(adevice, i);
+	for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++) {
+		if (test_bit(ideapad_rfk_data[i].cfgbit, (unsigned long *)&cfg))
+			ideapad_register_rfkill(adevice, i);
 	}
 	ideapad_sync_rfk_state(adevice);
+
 	return 0;
 
-camera_failed:
-	ideapad_platform_exit();
 platform_failed:
 	kfree(priv);
 	return ret;
@@ -371,14 +368,12 @@ static int ideapad_acpi_remove(struct acpi_device *adevice, int type)
 	struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
 	int i;
 
-	device_remove_file(&adevice->dev, &dev_attr_camera_power);
-
-	for (i = IDEAPAD_DEV_WLAN; i <= IDEAPAD_DEV_KILLSW; i++)
+	for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++)
 		ideapad_unregister_rfkill(adevice, i);
-
 	ideapad_platform_exit();
 	dev_set_drvdata(&adevice->dev, NULL);
 	kfree(priv);
+
 	return 0;
 }
 
-- 
1.7.1


  parent reply	other threads:[~2010-12-09  7:57 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-09  7:56 [PATCH v2 0/7] ideapad: hotkey enablement Ike Panhc
2010-12-09  7:56 ` [PATCH 1/7] ideapad: add platform driver for ideapad Ike Panhc
2010-12-09 17:04   ` Dave Hansen
2010-12-09  7:56 ` Ike Panhc [this message]
2010-12-09  7:57 ` [PATCH 3/7] ideapad: add hotkey support Ike Panhc
2010-12-09  7:57 ` [PATCH 4/7] ideapad: select INPUT_SPARSEKMAP Ike Panhc
2010-12-09  8:13   ` Dmitry Torokhov
2010-12-09  7:57 ` [PATCH 5/7] ideapad: add markups, unify comments and return result when init Ike Panhc
2010-12-09  7:57 ` [PATCH 6/7] ideapad: pass ideapad_priv as argument (part 1) Ike Panhc
2010-12-09  7:57 ` [PATCH 7/7] ideapad: pass ideapad_priv as argument (part 2) Ike Panhc
2010-12-09  8:39 ` [PATCH v2 0/7] ideapad: hotkey enablement Corentin Chary
2010-12-13  8:49   ` Ike Panhc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1291881419-4788-1-git-send-email-ike.pan@canonical.com \
    --to=ike.pan@canonical.com \
    --cc=dave@linux.vnet.ibm.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mjg@redhat.com \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®