mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ike Panhc <ike.pan@canonical.com>
To: linux-kernel@vger.kernel.org,
	platform-driver-x86@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Matthew Garrett <mjg@redhat.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Dave Hansen <dave@linux.vnet.ibm.com>,
	Corentin Chary <corentin.chary@gmail.com>
Subject: [PATCH 3/6] ideapad: add hotkey support
Date: Mon, 13 Dec 2010 18:00:38 +0800	[thread overview]
Message-ID: <1292234438-2686-1-git-send-email-ike.pan@canonical.com> (raw)
In-Reply-To: <1292234384-2599-1-git-send-email-ike.pan@canonical.com>

Hotkey enabled by this patch:
  Fn+F3: Video mode switch
  Fn+F5: software rfkill for wifi

For some ideapad when push Fn+F3, hardware generates Super-P keys, those key
will not be enabled by this patch.

Thanks for Dave Hansen report the problem. If CONFIG_INPUT_SPARSEKMAP is not
set, when building, you will have error message:

  ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined!
  ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined!
  ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined!

To select INPUT_SPARSEKMAP solve this issue.

Ref: http://lkml.org/lkml/2010/12/2/340

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
---
 drivers/platform/x86/Kconfig          |    1 +
 drivers/platform/x86/ideapad-laptop.c |   72 +++++++++++++++++++++++++++++++++
 2 files changed, 73 insertions(+), 0 deletions(-)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index faec777..879d266 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -226,6 +226,7 @@ config IDEAPAD_LAPTOP
 	tristate "Lenovo IdeaPad Laptop Extras"
 	depends on ACPI
 	depends on RFKILL
+	select INPUT_SPARSEKMAP
 	help
 	  This is a driver for the rfkill switches on Lenovo IdeaPad netbooks.
 
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 49f207f..04b4f5b 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -28,6 +28,8 @@
 #include <acpi/acpi_drivers.h>
 #include <linux/rfkill.h>
 #include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
 
 #define IDEAPAD_DEV_CAMERA	0
 #define IDEAPAD_DEV_WLAN	1
@@ -39,6 +41,7 @@ struct ideapad_private {
 	acpi_handle handle;
 	struct rfkill *rfk[5];
 	struct platform_device *platform_device;
+	struct input_dev *inputdev;
 } *ideapad_priv;
 
 static struct {
@@ -325,6 +328,66 @@ static void ideapad_platform_exit(void)
 }
 /* the above is platform device */
 
+/*
+ * input device
+ */
+static const struct key_entry ideapad_keymap[] = {
+	{ KE_KEY, 0x06, { KEY_SWITCHVIDEOMODE } },
+	{ KE_KEY, 0x0D, { KEY_WLAN } },
+	{ KE_END, 0 },
+};
+
+static int __devinit ideapad_input_init(void)
+{
+	struct input_dev *inputdev;
+	int error;
+
+	inputdev = input_allocate_device();
+	if (!inputdev) {
+		pr_info("Unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	inputdev->name = "Ideapad extra buttons";
+	inputdev->phys = "ideapad/input0";
+	inputdev->id.bustype = BUS_HOST;
+	inputdev->dev.parent = &ideapad_priv->platform_device->dev;
+
+	error = sparse_keymap_setup(inputdev, ideapad_keymap, NULL);
+	if (error) {
+		pr_err("Unable to setup input device keymap\n");
+		goto err_free_dev;
+	}
+
+	error = input_register_device(inputdev);
+	if (error) {
+		pr_err("Unable to register input device\n");
+		goto err_free_keymap;
+	}
+
+	ideapad_priv->inputdev = inputdev;
+	return 0;
+
+err_free_keymap:
+	sparse_keymap_free(inputdev);
+err_free_dev:
+	input_free_device(inputdev);
+	return error;
+}
+
+static void __devexit ideapad_input_exit(void)
+{
+	sparse_keymap_free(ideapad_priv->inputdev);
+	input_unregister_device(ideapad_priv->inputdev);
+	ideapad_priv->inputdev = NULL;
+}
+
+static void ideapad_input_report(unsigned long scancode)
+{
+	sparse_keymap_report_event(ideapad_priv->inputdev, scancode, 1, true);
+}
+/* the above is input device */
+
 static const struct acpi_device_id ideapad_device_ids[] = {
 	{ "VPC2004", 0},
 	{ "", 0},
@@ -350,6 +413,10 @@ static int ideapad_acpi_add(struct acpi_device *adevice)
 	if (ret)
 		goto platform_failed;
 
+	ret = ideapad_input_init();
+	if (ret)
+		goto input_failed;
+
 	for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++) {
 		if (test_bit(ideapad_rfk_data[i].cfgbit, (unsigned long *)&cfg))
 			ideapad_register_rfkill(adevice, i);
@@ -358,6 +425,8 @@ static int ideapad_acpi_add(struct acpi_device *adevice)
 
 	return 0;
 
+input_failed:
+	ideapad_platform_exit();
 platform_failed:
 	kfree(priv);
 	return ret;
@@ -370,6 +439,7 @@ static int ideapad_acpi_remove(struct acpi_device *adevice, int type)
 
 	for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++)
 		ideapad_unregister_rfkill(adevice, i);
+	ideapad_input_exit();
 	ideapad_platform_exit();
 	dev_set_drvdata(&adevice->dev, NULL);
 	kfree(priv);
@@ -392,6 +462,8 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event)
 		if (test_bit(vpc_bit, &vpc1)) {
 			if (vpc_bit == 9)
 				ideapad_sync_rfk_state(adevice);
+			else
+				ideapad_input_report(vpc_bit);
 		}
 	}
 }
-- 
1.7.1


  parent reply	other threads:[~2010-12-13 10:00 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-13  9:59 [PATCH v3 0/6] ideapad: hotkey enablement Ike Panhc
2010-12-13 10:00 ` [PATCH 1/6] ideapad: add platform driver for ideapad Ike Panhc
2010-12-13 10:00 ` [PATCH 2/6] ideapad: let camera power control entry under platform driver Ike Panhc
2010-12-13 10:00 ` Ike Panhc [this message]
2010-12-13 10:00 ` [PATCH 4/6] ideapad: add markups, unify comments and return result when init Ike Panhc
2010-12-13 10:01 ` [PATCH 5/6] ideapad: pass ideapad_priv as argument (part 1) Ike Panhc
2010-12-13 10:01 ` [PATCH 6/6] ideapad: pass ideapad_priv as argument (part 2) Ike Panhc
2010-12-20 16:14 ` [PATCH v3 0/6] ideapad: hotkey enablement Matthew Garrett

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1292234438-2686-1-git-send-email-ike.pan@canonical.com \
    --to=ike.pan@canonical.com \
    --cc=corentin.chary@gmail.com \
    --cc=dave@linux.vnet.ibm.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mjg@redhat.com \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®