From: Stefan Weil <weil@mail.berlios.de>
To: unlisted-recipients:; (no To-header on input)
Cc: Stefan Weil <weil@mail.berlios.de>,
Jiri Kosina <trivial@kernel.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH] Fix spelling milisecond -> millisecond in comments and debug messages
Date: Sun, 2 Jan 2011 15:21:41 +0100 [thread overview]
Message-ID: <1293978101-5252-1-git-send-email-weil@mail.berlios.de> (raw)
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
---
arch/arm/mach-bcmring/include/csp/tmrHw.h | 4 ++--
drivers/acpi/apei/einj.c | 2 +-
drivers/acpi/apei/erst.c | 2 +-
drivers/gpu/drm/nouveau/nouveau_bios.c | 4 ++--
drivers/net/wireless/wl1251/wl1251.h | 2 +-
drivers/net/wireless/wl12xx/wl1271.h | 4 ++--
6 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
index f1236d0..2cbb530 100644
--- a/arch/arm/mach-bcmring/include/csp/tmrHw.h
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -76,7 +76,7 @@ tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id
* certain time interval
*
* This function initializes a periodic timer to generate timer interrupt
-* after every time interval in milisecond
+* after every time interval in millisecond
*
* @return On success: Effective interval set in mili-second
* On failure: 0
@@ -93,7 +93,7 @@ tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] T
* after certain time interval
*
* This function initializes a periodic timer to generate a single ticks after
-* certain time interval in milisecond
+* certain time interval in millisecond
*
* @return On success: Effective interval set in mili-second
* On failure: 0
diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c
index cf29df6..096aebf 100644
--- a/drivers/acpi/apei/einj.c
+++ b/drivers/acpi/apei/einj.c
@@ -39,7 +39,7 @@
#define EINJ_PFX "EINJ: "
#define SPIN_UNIT 100 /* 100ns */
-/* Firmware should respond within 1 miliseconds */
+/* Firmware should respond within 1 milliseconds */
#define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC)
/*
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 5850d32..cf6db6b 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -53,7 +53,7 @@
sizeof(struct acpi_table_erst)))
#define SPIN_UNIT 100 /* 100ns */
-/* Firmware should respond within 1 miliseconds */
+/* Firmware should respond within 1 milliseconds */
#define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC)
#define FIRMWARE_MAX_STALL 50 /* 50us */
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index b229357..73c2dab 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -1927,7 +1927,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
* offset (8 bit): opcode
* offset + 1 (16 bit): time
*
- * Sleep for "time" miliseconds.
+ * Sleep for "time" milliseconds.
*/
unsigned time = ROM16(bios->data[offset + 1]);
@@ -1935,7 +1935,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
if (!iexec->execute)
return 3;
- BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X miliseconds\n",
+ BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X milliseconds\n",
offset, time);
msleep(time);
diff --git a/drivers/net/wireless/wl1251/wl1251.h b/drivers/net/wireless/wl1251/wl1251.h
index e113d4c..47d2653 100644
--- a/drivers/net/wireless/wl1251/wl1251.h
+++ b/drivers/net/wireless/wl1251/wl1251.h
@@ -418,7 +418,7 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
#define WL1251_FW_NAME "wl1251-fw.bin"
#define WL1251_NVS_NAME "wl1251-nvs.bin"
-#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+#define WL1251_POWER_ON_SLEEP 10 /* in milliseconds */
#define WL1251_PART_DOWN_MEM_START 0x0
#define WL1251_PART_DOWN_MEM_SIZE 0x16800
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 8a4cd76..046acb8 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -506,7 +506,7 @@ int wl1271_plt_stop(struct wl1271 *wl);
/* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
on in case is has been shut down shortly before */
-#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
-#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
+#define WL1271_PRE_POWER_ON_SLEEP 20 /* in milliseconds */
+#define WL1271_POWER_ON_SLEEP 200 /* in milliseconds */
#endif
--
1.7.2.3
next reply other threads:[~2011-01-02 14:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-02 14:21 Stefan Weil [this message]
2011-01-03 12:52 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1293978101-5252-1-git-send-email-weil@mail.berlios.de \
--to=weil@mail.berlios.de \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®