From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754524Ab1AGQjT (ORCPT ); Fri, 7 Jan 2011 11:39:19 -0500 Received: from mga11.intel.com ([192.55.52.93]:40007 "EHLO mga11.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753821Ab1AGQjR (ORCPT ); Fri, 7 Jan 2011 11:39:17 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.60,289,1291622400"; d="scan'208";a="644537603" From: Youquan Song To: linux-kernel@vger.kernel.org, hpa@linux.intel.com, suresh.b.siddha@intel.com Cc: yong.y.wang@linux.intel.com, joe@perches.com, jbaron@redhat.com, arjan@linux.intel.com, trenn@suse.de, kent.liu@intel.com, chaohong.guo@intel.com, Youquan Song , Youquan Song Subject: [PATCH v2 1/2] apic: Fix error interrupt report at all APs Date: Sat, 8 Jan 2011 00:36:43 +0800 Message-Id: <1294418204-15587-2-git-send-email-youquan.song@intel.com> X-Mailer: git-send-email 1.6.4.2 In-Reply-To: <1294418204-15587-1-git-send-email-youquan.song@intel.com> References: <1294418204-15587-1-git-send-email-youquan.song@intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Recently, customer report that once machine boot, there are many error interrupt reported with exact number of all APs. The root cause is Local APIC will generate error interrupt when it detect the illegal vector (one in 0 ~ 15) in an interrupt message received or interrupt generate from local vector table or self IPI. SDM3A.chapter 10. AP LAPIC thermal sensor register will be reset to 0x10000, if thermal throttling interrupt take over by BIOS, it need restore AP with the thermal sensor register value of geting from BSP, otherwise cause system issue. If BIOS does not take over the thermal interrupt, The restore value will be CPU rest value of 0x10000, which means the interrupt vector is zero. After writing 0x10000 to thermal sensor LVT, the processor will recieve the error interrupt report if the APIC error interrupt is also set. This patch add check the BIOS whether take over the thermal interrupt by look at interrupt delivery mode not fixed mode(BIOS handle will be SMI mode) before restore AP's thermal LVT. So the agony noise of error interrupt will dismiss when boot on machine that BIOS does not handle thermal interrupt.. Signed-off-by: Youquan Song --- arch/x86/include/asm/apicdef.h | 1 + arch/x86/kernel/cpu/mcheck/therm_throt.c | 12 +++++++----- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index a859ca4..f587be0 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -78,6 +78,7 @@ #define APIC_DEST_LOGICAL 0x00800 #define APIC_DEST_PHYSICAL 0x00000 #define APIC_DM_FIXED 0x00000 +#define APIC_DM_FIXED_MASK 0x00700 #define APIC_DM_LOWEST 0x00100 #define APIC_DM_SMI 0x00200 #define APIC_DM_REMRD 0x00300 diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 4b68326..ecd6992 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -405,18 +405,20 @@ void intel_init_thermal(struct cpuinfo_x86 *c) */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); + h = lvtthmr_init; /* * The initial value of thermal LVT entries on all APs always reads * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI * sequence to them and LVT registers are reset to 0s except for * the mask bits which are set to 1s when APs receive INIT IPI. - * Always restore the value that BIOS has programmed on AP based on - * BSP's info we saved since BIOS is always setting the same value - * for all threads/cores + * If BIOS take over the thermal interrupt and set its interrupt + * delivery mode to SMI not fixed, it restore the value that BIOS has + * programmed on AP based on BSP's info we saved since BIOS is always + * setting the same value for all threads/cores. */ - apic_write(APIC_LVTTHMR, lvtthmr_init); + if (h & APIC_DM_FIXED_MASK) + apic_write(APIC_LVTTHMR, lvtthmr_init); - h = lvtthmr_init; if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) { printk(KERN_DEBUG -- 1.6.4.2