From: Cyril Chemparathy <cyril@ti.com>
To: davinci-linux-open-source@linux.davincidsp.com,
spi-devel-general@lists.sourceforge.net, sameo@linux.intel.com,
rpurdie@rpsys.net, dbrownell@users.sourceforge.net
Cc: c-park@ti.com, linux-arm-kernel@lists.arm.linux.org.uk,
linux-kernel@vger.kernel.org, Cyril Chemparathy <cyril@ti.com>
Subject: [PATCH v8 08/11] davinci: add tnetv107x evm regulators
Date: Tue, 18 Jan 2011 14:21:42 -0500 [thread overview]
Message-ID: <1295378505-15221-9-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1295378505-15221-1-git-send-email-cyril@ti.com>
This patch adds regulator and spi board info definitions for the tps6524x
power management IC found on tnetv107x evm boards.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
---
arch/arm/mach-davinci/board-tnetv107x-evm.c | 85 +++++++++++++++++++++++++++
1 files changed, 85 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 1a656e8..ca23516 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -26,6 +26,9 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -254,7 +257,89 @@ static struct tnetv107x_device_info evm_device_info __initconst = {
.ssp_config = &ssp_config,
};
+static struct regulator_consumer_supply usb_consumers[] = {
+ REGULATOR_SUPPLY("vbus", "musb_hdrc.1"),
+};
+
+static struct regulator_consumer_supply lcd_consumers[] = {
+ REGULATOR_SUPPLY("vlcd", "tps6116x"),
+};
+
+static struct regulator_init_data regulators[] = {
+ {
+ .constraints = {
+ .name = "DCDC1",
+ .min_uV = 1000000,
+ .max_uV = 1000000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "DCDC2",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "DCDC3",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 4800000,
+ .max_uV = 4800000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .num_consumer_supplies = ARRAY_SIZE(usb_consumers),
+ .consumer_supplies = usb_consumers,
+ .constraints = {
+ .name = "USB",
+ .min_uA = 200000,
+ .max_uA = 1000000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT |
+ REGULATOR_CHANGE_STATUS,
+ },
+ },
+ {
+ .num_consumer_supplies = ARRAY_SIZE(lcd_consumers),
+ .consumer_supplies = lcd_consumers,
+ .constraints = {
+ .name = "LCD",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+};
+
static struct spi_board_info spi_info[] __initconst = {
+ {
+ .modalias = "tps6524x",
+ .bus_num = 1,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .platform_data = regulators,
+ },
};
static __init void tnetv107x_evm_board_init(void)
--
1.7.1
next prev parent reply other threads:[~2011-01-18 19:23 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-18 19:21 [PATCH v8 00/11] tnetv107x ssp drivers Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 01/11] mfd: add driver for sequencer serial port Cyril Chemparathy
2011-01-19 17:43 ` Kevin Hilman
2011-01-31 0:40 ` Samuel Ortiz
2011-03-17 7:33 ` Nori, Sekhar
2011-01-18 19:21 ` [PATCH v8 02/11] spi: add ti-ssp spi master driver Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 03/11] gpio: add ti-ssp gpio driver Cyril Chemparathy
2011-02-28 12:34 ` Nori, Sekhar
2011-03-17 18:45 ` Grant Likely
2011-03-18 6:30 ` Nori, Sekhar
2011-01-18 19:21 ` [PATCH v8 04/11] backlight: add support for tps6116x controller Cyril Chemparathy
2011-01-19 17:42 ` Kevin Hilman
2011-01-18 19:21 ` [PATCH v8 05/11] davinci: add tnetv107x ssp platform device Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 06/11] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 07/11] davinci: add spi devices on tnetv107x evm Cyril Chemparathy
2011-01-18 19:21 ` Cyril Chemparathy [this message]
2011-01-18 19:21 ` [PATCH v8 09/11] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 10/11] davinci: add tnetv107x evm backlight device Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 11/11] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295378505-15221-9-git-send-email-cyril@ti.com \
--to=cyril@ti.com \
--cc=c-park@ti.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=rpurdie@rpsys.net \
--cc=sameo@linux.intel.com \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome