From: Marek Belisko <marek.belisko@open-nandra.com>
To: gregkh@suse.de
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Marek Belisko <marek.belisko@open-nandra.com>
Subject: [PATCH resend 03/12] staging: ft1000: Fix coding style in check_usb_db() function.
Date: Tue, 25 Jan 2011 12:31:14 +0100 [thread overview]
Message-ID: <1295955083-11086-3-git-send-email-marek.belisko@open-nandra.com> (raw)
In-Reply-To: <1295955083-11086-1-git-send-email-marek.belisko@open-nandra.com>
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
.../staging/ft1000/ft1000-usb/ft1000_download.c | 87 +++++++++----------
1 files changed, 41 insertions(+), 46 deletions(-)
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
index edeabff..30501f5 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
@@ -125,54 +125,49 @@ struct dsp_image_info {
//---------------------------------------------------------------------------
static u32 check_usb_db (struct ft1000_device *ft1000dev)
{
- int loopcnt;
- u16 temp;
- u32 status, ret_val = HANDSHAKE_MAG_TIMEOUT_VALUE;
-
- loopcnt = 0;
- while (loopcnt < 10)
- {
-
- status = ft1000_read_register (ft1000dev, &temp, FT1000_REG_DOORBELL);
- DEBUG("check_usb_db: read FT1000_REG_DOORBELL value is %x\n", temp);
- if (temp & 0x0080)
- {
- DEBUG("FT1000:Got checkusb doorbell\n");
- status = ft1000_write_register (ft1000dev, 0x0080, FT1000_REG_DOORBELL);
- status = ft1000_write_register (ft1000dev, 0x0100, FT1000_REG_DOORBELL);
- status = ft1000_write_register (ft1000dev, 0x8000, FT1000_REG_DOORBELL);
- break;
- }
- else
- {
- loopcnt++;
- msleep (10);
- }
-
- } //end of while
-
-
- loopcnt = 0;
- while (loopcnt < 20)
- {
-
- status = ft1000_read_register (ft1000dev, &temp, FT1000_REG_DOORBELL);
- DEBUG("FT1000:check_usb_db:Doorbell = 0x%x\n", temp);
- if (temp & 0x8000)
- {
- loopcnt++;
- msleep (10);
- }
- else
- {
- DEBUG("check_usb_db: door bell is cleared, return 0\n");
- ret_val = 0;
- break;
- }
- }
+ int loopcnt;
+ u16 temp;
+ u32 status, ret_val = HANDSHAKE_MAG_TIMEOUT_VALUE;
+
+ loopcnt = 0;
+ while (loopcnt < 10) {
+
+ status = ft1000_read_register(ft1000dev, &temp,
+ FT1000_REG_DOORBELL);
+ DEBUG("check_usb_db: read FT1000_REG_DOORBELL value is %x\n",
+ temp);
+ if (temp & 0x0080) {
+ DEBUG("FT1000:Got checkusb doorbell\n");
+ status = ft1000_write_register(ft1000dev, 0x0080,
+ FT1000_REG_DOORBELL);
+ status = ft1000_write_register(ft1000dev, 0x0100,
+ FT1000_REG_DOORBELL);
+ status = ft1000_write_register(ft1000dev, 0x8000,
+ FT1000_REG_DOORBELL);
+ break;
+ } else {
+ loopcnt++;
+ msleep(10);
+ }
+ }
+
+ loopcnt = 0;
+ while (loopcnt < 20) {
+
+ status = ft1000_read_register(ft1000dev, &temp,
+ FT1000_REG_DOORBELL);
+ DEBUG("FT1000:check_usb_db:Doorbell = 0x%x\n", temp);
+ if (temp & 0x8000) {
+ loopcnt++;
+ msleep(10);
+ } else {
+ DEBUG("check_usb_db: door bell is cleared,return 0\n");
+ ret_val = 0;
+ break;
+ }
+ }
return ret_val;
-
}
//---------------------------------------------------------------------------
--
1.7.1
next prev parent reply other threads:[~2011-01-25 11:32 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-25 11:31 [PATCH resend 01/12] staging: ft1000: Use common return point Marek Belisko
2011-01-25 11:31 ` [PATCH resend 02/12] staging: ft1000: Remove dead code Marek Belisko
2011-01-25 11:31 ` Marek Belisko [this message]
2011-01-25 11:31 ` [PATCH resend 04/12] staging: ft1000: Fix coding style in put_handshake() function Marek Belisko
2011-01-25 11:31 ` [PATCH resend 05/12] staging: ft1000: Fix coding style in get_handshake_usb() function Marek Belisko
2011-01-25 12:14 ` Dan Carpenter
2011-01-25 11:31 ` [PATCH resend 06/12] staging: ft1000: Fix coding style in put_handshake_usb() function Marek Belisko
2011-01-25 11:31 ` [PATCH resend 07/12] staging: ft1000: Fix coding style in get_request_type() function Marek Belisko
2011-01-25 12:23 ` Dan Carpenter
2011-01-25 11:31 ` [PATCH resend 08/12] staging: ft1000: Fix coding style in get_request_type_usb() function Marek Belisko
2011-01-25 12:25 ` Dan Carpenter
2011-01-25 11:31 ` [PATCH resend 09/12] staging: ft1000: Fix coding style in get_request_value() function Marek Belisko
2011-01-25 12:28 ` Dan Carpenter
2011-01-25 11:31 ` [PATCH resend 10/12] staging: ft1000: Fix coding style in put_request_value() function Marek Belisko
2011-01-25 11:31 ` [PATCH resend 11/12] staging: ft1000: Fix coding style in hdr_checksum() function Marek Belisko
2011-01-25 11:31 ` [PATCH resend 12/12] staging: ft1000: Fix coding style in get_handshake() function Marek Belisko
2011-01-25 12:04 ` [PATCH resend 01/12] staging: ft1000: Use common return point Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295955083-11086-3-git-send-email-marek.belisko@open-nandra.com \
--to=marek.belisko@open-nandra.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®