From: Andres Salomon <dilinger@queued.net>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
linux-kernel@vger.kernel.org,
Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Subject: [PATCH 4/9] ds1wm: use mfd_data instead of driver_data
Date: Tue, 15 Feb 2011 14:25:24 -0800 [thread overview]
Message-ID: <1297808729-21110-5-git-send-email-dilinger@queued.net> (raw)
In-Reply-To: <1297808729-21110-1-git-send-email-dilinger@queued.net>
Use mfd_data for passing information from mfd drivers to mfd
clients. The mfd_cell's driver_data field is being phased out.
Clients that were using driver_data now access .mfd_data
via mfd_get_data(). This changes ds1wm only; mfd drivers with
other cells are not modified, with the exception of led_cell.
The led_cell.driver_data line is dropped from htc-pasic3.c in this
patch as well. It's not used in mainline (there's no leds-pasic3
platform driver), so it should be safe to take care of that here.
Signed-off-by: Andres Salomon <dilinger@queued.net>
---
drivers/mfd/asic3.c | 2 +-
drivers/mfd/htc-pasic3.c | 3 +--
drivers/w1/masters/ds1wm.c | 4 ++--
3 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 71d2901..549d14d 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -682,7 +682,7 @@ static struct mfd_cell asic3_cell_ds1wm = {
.name = "ds1wm",
.enable = ds1wm_enable,
.disable = ds1wm_disable,
- .driver_data = &ds1wm_pdata,
+ .mfd_data = &ds1wm_pdata,
.num_resources = ARRAY_SIZE(ds1wm_resources),
.resources = ds1wm_resources,
};
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index 079d396..fb9770b 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -117,7 +117,7 @@ static struct mfd_cell ds1wm_cell __initdata = {
.name = "ds1wm",
.enable = ds1wm_enable,
.disable = ds1wm_disable,
- .driver_data = &ds1wm_pdata,
+ .mfd_data = &ds1wm_pdata,
.num_resources = 2,
.resources = ds1wm_resources,
};
@@ -172,7 +172,6 @@ static int __init pasic3_probe(struct platform_device *pdev)
}
if (pdata && pdata->led_pdata) {
- led_cell.driver_data = pdata->led_pdata;
ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, 0);
if (ret < 0)
dev_warn(dev, "failed to register LED device\n");
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
index 94f55d8..22fc726 100644
--- a/drivers/w1/masters/ds1wm.c
+++ b/drivers/w1/masters/ds1wm.c
@@ -216,7 +216,7 @@ static int ds1wm_find_divisor(int gclk)
static void ds1wm_up(struct ds1wm_data *ds1wm_data)
{
int divisor;
- struct ds1wm_driver_data *plat = ds1wm_data->cell->driver_data;
+ struct ds1wm_driver_data *plat = mfd_get_data(ds1wm_data->pdev);
if (ds1wm_data->cell->enable)
ds1wm_data->cell->enable(ds1wm_data->pdev);
@@ -356,7 +356,7 @@ static int ds1wm_probe(struct platform_device *pdev)
ret = -ENOMEM;
goto err0;
}
- plat = cell->driver_data;
+ plat = mfd_get_data(pdev);
/* calculate bus shift from mem resource */
ds1wm_data->bus_shift = resource_size(res) >> 3;
--
1.7.2.3
next prev parent reply other threads:[~2011-02-15 22:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-15 22:25 [PATCH 0/9] mfd-core: clean up platform_data/driver_data from mfd_cell Andres Salomon
2011-02-15 22:25 ` [PATCH 1/9] mfd-core: rename platform_data field of mfd_cell to mfd_data Andres Salomon
2011-02-16 8:39 ` Linus Walleij
2011-02-15 22:25 ` [PATCH 2/9] davinci_voicecodec: use mfd_data instead of driver_data Andres Salomon
2011-02-16 21:59 ` [alsa-devel] " Mark Brown
2011-02-15 22:25 ` [PATCH 3/9] wm8400-codec: " Andres Salomon
2011-02-16 21:29 ` Mark Brown
2011-02-15 22:25 ` Andres Salomon [this message]
2011-02-15 22:25 ` [PATCH 5/9] tmio-mmc: " Andres Salomon
2011-02-15 22:25 ` [PATCH 6/9] tmio-nand: " Andres Salomon
2011-02-15 22:25 ` [PATCH 7/9] tmio-fb: " Andres Salomon
2011-02-15 22:25 ` [PATCH 8/9] rdc321x-southbridge: " Andres Salomon
2011-02-15 22:25 ` [PATCH 9/9] mfd-core: remove driver_data field from mfd_cell Andres Salomon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297808729-21110-5-git-send-email-dilinger@queued.net \
--to=dilinger@queued.net \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome