[PATCH 09/11] x86/ioapic: Add OF bindings for IO-APIC

[Sebastian Andrzej Siewior <bigeasy@linutronix.de>]

ioapic_xlate provides a translation from the information in device tree
to ioapic related informations. This includes
- obtaining hw irq which is the vector number "=> pin number + gsi"
- obtaining type (level/edge/..)
- programming this information into ioapic

ioapic_add_ofnode adds an irq_domain based on informations from the device
tree. This information (irq_domain) is required in order to map a device to
its proper interrupt controller.

Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
---
 arch/x86/include/asm/io_apic.h |    7 +++
 arch/x86/include/asm/prom.h    |    2 +
 arch/x86/kernel/apic/io_apic.c |   99 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/devicetree.c   |   13 +++++
 arch/x86/kernel/irqinit.c      |    6 ++
 5 files changed, 127 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index f327d38..fe88a73 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -177,6 +177,13 @@ struct mp_ioapic_gsi{
 	u32 gsi_base;
 	u32 gsi_end;
 };
+#ifdef CONFIG_OF
+struct mp_of_ioapic {
+	struct device_node *node;
+};
+extern struct mp_of_ioapic mp_of_ioapic[MAX_IO_APICS];
+void __init ioapic_add_ofnode(struct device_node *np);
+#endif
 extern struct mp_ioapic_gsi  mp_gsi_routing[];
 extern u32 gsi_top;
 int mp_find_ioapic(u32 gsi);
diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h
index 3e441b3..98b9a73 100644
--- a/arch/x86/include/asm/prom.h
+++ b/arch/x86/include/asm/prom.h
@@ -26,6 +26,7 @@
 extern int of_ioapic;
 extern u64 initial_dtb;
 extern void add_dtb(u64 data);
+extern void x86_add_irq_domains(void);
 void x86_dtb_find_config(void);
 void x86_dtb_get_config(unsigned int unused);
 void add_interrupt_host(struct irq_domain *ih);
@@ -43,6 +44,7 @@ static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
 
 #else
 static inline void add_dtb(u64 data) { }
+static inline void x86_add_irq_domains(void) { }
 static inline void x86_of_pci_init(void) { }
 #define x86_dtb_find_config x86_init_noop
 #define x86_dtb_get_config x86_init_uint_noop
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index ca9e2a3..c172452 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -43,6 +43,7 @@
 #include <linux/bootmem.h>
 #include <linux/dmar.h>
 #include <linux/hpet.h>
+#include <linux/of_address.h>
 
 #include <asm/idle.h>
 #include <asm/io.h>
@@ -60,6 +61,7 @@
 #include <asm/irq_remapping.h>
 #include <asm/hpet.h>
 #include <asm/hw_irq.h>
+#include <asm/irq_controller.h>
 
 #include <asm/apic.h>
 
@@ -88,6 +90,10 @@ int nr_ioapics;
 /* IO APIC gsi routing info */
 struct mp_ioapic_gsi  mp_gsi_routing[MAX_IO_APICS];
 
+#ifdef CONFIG_OF
+/* OF -> IO APIC lookup */
+struct mp_of_ioapic mp_of_ioapic[MAX_IO_APICS];
+#endif
 /* The one past the highest gsi number used */
 u32 gsi_top;
 
@@ -4083,6 +4089,99 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 	nr_ioapics++;
 }
 
+#ifdef CONFIG_OF
+static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize,
+		u32 *out_hwirq, u32 *out_type)
+{
+	u32 line;
+	u32 idx;
+	u32 type;
+	u32 trigger;
+	u32 polarity;
+	struct irq_cfg *cfg;
+	struct irq_desc *desc;
+
+	if (intsize < 1)
+		return -EINVAL;
+
+	line = *intspec;
+	idx = (u32) id->priv;
+	*out_hwirq = line + mp_gsi_routing[idx].gsi_base;
+	if (intsize > 1) {
+		intspec++;
+		type = *intspec;
+		switch (type) {
+		case 0:
+			*out_type = IRQ_TYPE_EDGE_RISING;
+			trigger = IOAPIC_EDGE;
+			polarity = 1;
+			break;
+		case 1:
+			*out_type = IRQ_TYPE_LEVEL_LOW;
+			trigger = IOAPIC_LEVEL;
+			polarity = 0;
+			break;
+		case 2:
+			*out_type = IRQ_TYPE_LEVEL_HIGH;
+			trigger = IOAPIC_LEVEL;
+			polarity = 1;
+			break;
+		case 3:
+			*out_type = IRQ_TYPE_EDGE_FALLING;
+			trigger = IOAPIC_EDGE;
+			polarity = 0;
+			break;
+		default:
+			*out_type = IRQ_TYPE_NONE;
+			trigger = IOAPIC_AUTO;
+			polarity = 0;
+			break;
+		};
+	} else {
+		*out_type = IRQ_TYPE_NONE;
+		trigger = IOAPIC_AUTO;
+		polarity = 0;
+	}
+	/* And now tell the IO APIC to make the line ready */
+	desc = irq_to_desc_alloc_node(*out_hwirq, 0);
+	cfg = irq_cfg(*out_hwirq);
+	add_pin_to_irq_node(cfg, 0, idx, line);
+	/* make it edge by default, settype will update it */
+	setup_ioapic_irq(idx, line, *out_hwirq, cfg, trigger, polarity);
+	return 0;
+}
+
+void __init ioapic_add_ofnode(struct device_node *np)
+{
+	int i;
+	int ret;
+	struct resource r;
+
+	ret = of_address_to_resource(np, 0, &r);
+	if (ret) {
+		printk(KERN_ERR "Failed to obtain address for %s\n",
+				np->full_name);
+		return;
+	}
+
+	for (i = 0; i < nr_ioapics; i++) {
+		if (r.start == mp_ioapics[i].apicaddr) {
+			struct irq_domain *id;
+
+			mp_of_ioapic[i].node = np;
+			id = kzalloc(sizeof(*id), GFP_KERNEL);
+			BUG_ON(!id);
+			id->controller = np;
+			id->xlate = ioapic_xlate;
+			id->priv = (void *)i;
+			add_interrupt_host(id);
+			return;
+		}
+	}
+	printk(KERN_ERR "IOxAPIC at %s is not registered.\n", np->full_name);
+}
+#endif
+
 /* Enable IOAPIC early just for system timer */
 void __init pre_init_apic_IRQ0(void)
 {
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 179833f..62d0072 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -322,3 +322,16 @@ void __init x86_dtb_get_config(unsigned int unused)
 	dtb_setup_hpet();
 	dtb_apic_setup();
 }
+
+void __init x86_add_irq_domains(void)
+{
+	struct device_node *dp;
+
+	if (!initial_boot_params)
+		return;
+
+	for_each_node_with_property(dp, "interrupt-controller") {
+		if (of_device_is_compatible(dp, "intel,ce4100-ioapic"))
+			ioapic_add_ofnode(dp);
+	}
+}
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 4cadf86..9f76f89 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -119,6 +119,12 @@ void __init init_IRQ(void)
 	int i;
 
 	/*
+	 * We probably need a better place for this, but it works for
+	 * now ...
+	 */
+	x86_add_irq_domains();
+
+	/*
 	 * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
 	 * If these IRQ's are handled by legacy interrupt-controllers like PIC,
 	 * then this configuration will likely be static after the boot. If
-- 
1.7.4