[PATCH 04/10] PTI Makefile and Kconfig additions.

[james_p_freyensee@linux.intel.com]

From: J Freyensee <james_p_freyensee@linux.intel.com>

This allows the Intel implementation of the PTI standard to be
compiled and configured in Kconfig.

Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
---
 drivers/misc/Kconfig  |   12 ++++++++++++
 drivers/misc/Makefile |    1 +
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4d073f1..f8076f1 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -136,6 +136,18 @@ config PHANTOM
 	  If you choose to build module, its name will be phantom. If unsure,
 	  say N here.
 
+config INTEL_MID_PTI
+        tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
+        help
+          The PTI (Parallel Trace Interface) driver directs
+          trace data routed from various parts in the system out
+          through an Intel Penwell PTI port and out of the mobile
+          device for analysis with a debugging tool (Lauterbach or Fido).
+
+          You should select this driver if the target kernel is meant for
+          an Intel Atom (non-netbook) mobile device containing a MIPI
+          P1149.7 standard implementation.
+
 config SGI_IOC4
 	tristate "SGI IOC4 Base IO support"
 	depends on PCI
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 98009cc..cae0463 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_IBM_ASM)		+= ibmasm/
 obj-$(CONFIG_AD525X_DPOT)	+= ad525x_dpot.o
 obj-$(CONFIG_AD525X_DPOT_I2C)	+= ad525x_dpot-i2c.o
 obj-$(CONFIG_AD525X_DPOT_SPI)	+= ad525x_dpot-spi.o
+obj-$(CONFIG_INTEL_MID_PTI)     += pti.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
-- 
1.7.2.3