From: Paul Bolle <pebolle@tiscali.nl>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
Jesper Juhl <jj@chaosbits.net>
Subject: [PATCH v3] intel8x0m: wait a bit before warm reset check
Date: Fri, 11 Mar 2011 11:24:52 +0100 [thread overview]
Message-ID: <1299839101.12153.3.camel@t41.thuisdomein> (raw)
At every resume a laptop I use prints this message (at KERN_ERR level):
ALSA sound/pci/intel8x0m.c:904: AC'97 warm reset still in progress? [0x2]
The thing to note here is that 0x2 corresponds to ICH_AC97COLD. Ie, what
seems to be happening is that the register involved indicated a warm
reset for some time (as the ICH_AC97WARM bit was set) but by the time
the warning is printed, and that same register is checked again, that
bit is already cleared and only the ICH_AC97COLD bit is still set.
It turns out a warm reset needs some time to settle, but it is currently
checked right away. The test therefore fails the first time it is done
and schedule_timeout_uninterruptible() will be called. Once we return
from that jiffies is already (far) past end_time on this laptop, so we
exit the loop, print a warning, and exit the function while the warm
reset actually succeeded.
A way to fix this is to call usleep_range() after writing to the
register involved. A handful of tests suggest 500 usecs is a safe value.
(This might punish the "finish cold reset" case, but on this laptop such
a cold reset apparently never happens, so I can't say for sure.)
While we're at it drop the extra single tick from end_time, as it looks
rather silly.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
changes in v3:
- add comment
- use usleep_range()
sound/pci/intel8x0m.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 13cec1e..b1c926c 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -894,7 +894,8 @@ static int snd_intel8x0m_ich_chip_init(struct intel8x0m *chip, int probing)
/* finish cold or do warm reset */
cnt |= (cnt & ICH_AC97COLD) == 0 ? ICH_AC97COLD : ICH_AC97WARM;
iputdword(chip, ICHREG(GLOB_CNT), cnt);
- end_time = (jiffies + (HZ / 4)) + 1;
+ usleep_range(500, 1000); /* give warm reset some time */
+ end_time = jiffies + HZ / 4;
do {
if ((igetdword(chip, ICHREG(GLOB_CNT)) & ICH_AC97WARM) == 0)
goto __ok;
--
1.7.4.1
next reply other threads:[~2011-03-11 10:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-11 10:24 Paul Bolle [this message]
2011-03-11 14:23 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1299839101.12153.3.camel@t41.thuisdomein \
--to=pebolle@tiscali.nl \
--cc=alsa-devel@alsa-project.org \
--cc=jj@chaosbits.net \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®