mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Daasaradhi Mannava <daasaradhimannava@gmail.com>,
	 Denis Benato <denis.benato@linux.dev>
Cc: Nikita Kravets <teackot@gmail.com>,
	Hans de Goede <hansg@kernel.org>,
	 platform-driver-x86@vger.kernel.org,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] platform/x86: msi-ec: Report valid charge thresholds when unset
Date: Thu, 17 Sep 2026 11:44:26 +0300 (EEST)	[thread overview]
Message-ID: <12cdf224-08aa-d19f-62fd-fbc6e26d6103@linux.intel.com> (raw)
In-Reply-To: <20260916174812.11496-1-daasaradhimannava@gmail.com>

On Wed, 16 Sep 2026, Daasaradhi Mannava wrote:

> The charge thresholds are computed by subtracting a fixed offset from
> the raw EC value. When no charge limit has been set, the EC can hold a
> value below range_min (0x80 on an MSI GL65 Leopard 9SCXK), and reading
> the sysfs attributes returns nonsense:
> 
>   charge_control_start_threshold: -10
>   charge_control_end_threshold:   0
> 
> Both attributes are documented to be within 0 - 100, and an end
> threshold of 0 wrongly suggests that charging is disabled.
> 
> The store path already rejects values outside range_min..range_max.
> Apply the same range to the show path and report the maximum threshold
> for any value outside of it.
> 
> Tested on an MSI GL65 Leopard 9SCXK (EC firmware 16U8EMS2.100) with
> the EC holding 0x80: the attributes now read 90 and 100.
> 
> Fixes: 392cacf2aa10 ("platform/x86: Add new msi-ec driver")
> Assisted-by: LLM
> Signed-off-by: Daasaradhi Mannava <daasaradhimannava@gmail.com>
> ---
>  drivers/platform/x86/msi-ec.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/platform/x86/msi-ec.c b/drivers/platform/x86/msi-ec.c
> index 566dfc73c..1762551e0 100644
> --- a/drivers/platform/x86/msi-ec.c
> +++ b/drivers/platform/x86/msi-ec.c
> @@ -1279,6 +1279,15 @@ static ssize_t charge_control_threshold_show(u8 offset,
>  	if (result < 0)
>  		return result;
>  
> +	/*
> +	 * The EC may hold an out-of-range value (e.g. 0x80) when no charge
> +	 * limit has been set. Report the maximum threshold instead of a
> +	 * meaningless (possibly negative) percentage.
> +	 */
> +	if (rdata < conf.charge_control.range_min ||
> +	    rdata > conf.charge_control.range_max)
> +		rdata = conf.charge_control.range_max;
> +
>  	return sysfs_emit(buf, "%i\n", rdata - offset);
>  }

Hi,

This seems similar to case in commits:

186bf9031666 ("platform/x86: asus-wmi: do not enforce a battery charge threshold")
78bf392ba77d ("platform/x86: asus-wmi: temporarily revert to setting a charge limit")

(The latter reverts first one as userspace could not handle -ENODATA but 
thought the feature was available.)

So ideally, I'd tend to think we'd want to return -ENODATA when the 
threshold hasn't been set. But whether userspace survives that is a 
question we cannot ignore.

-- 
 i.


  reply	other threads:[~2026-09-17  8:44 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-16 17:48 Daasaradhi Mannava
2026-09-17  8:44 ` Ilpo Järvinen [this message]
2026-09-18 18:49   ` Daasaradhi Mannava

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=12cdf224-08aa-d19f-62fd-fbc6e26d6103@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=daasaradhimannava@gmail.com \
    --cc=denis.benato@linux.dev \
    --cc=hansg@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=teackot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®