mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Steven Whitehouse <swhiteho@redhat.com>
To: cluster-devel@redhat.com, linux-kernel@vger.kernel.org
Cc: Benjamin Marzinski <bmarzins@redhat.com>,
	Steven Whitehouse <swhiteho@redhat.com>
Subject: [PATCH 11/15] GFS2: fix block allocation check for fallocate
Date: Tue, 15 Mar 2011 09:11:41 +0000	[thread overview]
Message-ID: <1300180305-5993-12-git-send-email-swhiteho@redhat.com> (raw)
In-Reply-To: <1300180305-5993-1-git-send-email-swhiteho@redhat.com>

From: Benjamin Marzinski <bmarzins@redhat.com>

GFS2 fallocate wasn't properly checking if a blocks were already allocated.
In write_empty_blocks(), if a page didn't have buffer_heads attached, GFS2
was always treating it as if there were no blocks allocated for that page.
GFS2 now calls gfs2_block_map() to check if the blocks are allocated before
writing them out.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 2878481..4074b95 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -622,8 +622,7 @@ static void empty_write_end(struct page *page, unsigned from,
 {
 	struct gfs2_inode *ip = GFS2_I(page->mapping->host);
 
-	page_zero_new_buffers(page, from, to);
-	flush_dcache_page(page);
+	zero_user(page, from, to-from);
 	mark_page_accessed(page);
 
 	if (!gfs2_is_writeback(ip))
@@ -632,36 +631,43 @@ static void empty_write_end(struct page *page, unsigned from,
 	block_commit_write(page, from, to);
 }
 
-static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
+static int needs_empty_write(sector_t block, struct inode *inode)
 {
-	unsigned start, end, next;
-	struct buffer_head *bh, *head;
 	int error;
+	struct buffer_head bh_map = { .b_state = 0, .b_blocknr = 0 };
 
-	if (!page_has_buffers(page)) {
-		error = __block_write_begin(page, from, to - from, gfs2_block_map);
-		if (unlikely(error))
-			return error;
+	bh_map.b_size = 1 << inode->i_blkbits;
+	error = gfs2_block_map(inode, block, &bh_map, 0);
+	if (unlikely(error))
+		return error;
+	return !buffer_mapped(&bh_map);
+}
 
-		empty_write_end(page, from, to);
-		return 0;
-	}
+static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
+{
+	struct inode *inode = page->mapping->host;
+	unsigned start, end, next, blksize;
+	sector_t block = page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits);
+	int ret;
 
-	bh = head = page_buffers(page);
+	blksize = 1 << inode->i_blkbits;
 	next = end = 0;
 	while (next < from) {
-		next += bh->b_size;
-		bh = bh->b_this_page;
+		next += blksize;
+		block++;
 	}
 	start = next;
 	do {
-		next += bh->b_size;
-		if (buffer_mapped(bh)) {
+		next += blksize;
+		ret = needs_empty_write(block, inode);
+		if (unlikely(ret < 0))
+			return ret;
+		if (ret == 0) {
 			if (end) {
-				error = __block_write_begin(page, start, end - start,
-							    gfs2_block_map);
-				if (unlikely(error))
-					return error;
+				ret = __block_write_begin(page, start, end - start,
+							  gfs2_block_map);
+				if (unlikely(ret))
+					return ret;
 				empty_write_end(page, start, end);
 				end = 0;
 			}
@@ -669,13 +675,13 @@ static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
 		}
 		else
 			end = next;
-		bh = bh->b_this_page;
+		block++;
 	} while (next < to);
 
 	if (end) {
-		error = __block_write_begin(page, start, end - start, gfs2_block_map);
-		if (unlikely(error))
-			return error;
+		ret = __block_write_begin(page, start, end - start, gfs2_block_map);
+		if (unlikely(ret))
+			return ret;
 		empty_write_end(page, start, end);
 	}
 
-- 
1.7.4


  parent reply	other threads:[~2011-03-15  9:34 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-15  9:11 GFS2: Pre-pull patch posting (merge window) Steven Whitehouse
2011-03-15  9:11 ` [PATCH 01/15] GFS2: Use RCU for glock hash table Steven Whitehouse
2011-03-15  9:11 ` [PATCH 02/15] GFS2: Post-VFS scale update for RCU path walk Steven Whitehouse
2011-03-15  9:11 ` [PATCH 03/15] GFS2: Fix glock queue trace point Steven Whitehouse
2011-03-15  9:11 ` [PATCH 04/15] GFS2: Improve cluster mmap scalability Steven Whitehouse
2011-03-15  9:11 ` [PATCH 05/15] GFS2: panics on quotacheck update Steven Whitehouse
2011-03-15  9:11 ` [PATCH 06/15] GFS2: deallocation performance patch Steven Whitehouse
2011-03-15  9:11 ` [PATCH 07/15] GFS2: quota allows exceeding hard limit Steven Whitehouse
2011-03-15  9:11 ` [PATCH 08/15] GFS2: Fix glock deallocation race Steven Whitehouse
2011-03-15  9:11 ` [PATCH 09/15] GFS2: Remove potential race in flock code Steven Whitehouse
2011-03-15  9:11 ` [PATCH 10/15] GFS2: Optimize glock multiple-dequeue code Steven Whitehouse
2011-03-15  9:11 ` Steven Whitehouse [this message]
2011-03-15  9:11 ` [PATCH 12/15] GFS2: introduce AIL lock Steven Whitehouse
2011-03-15  9:11 ` [PATCH 13/15] GFS2: Update to AIL list locking Steven Whitehouse
2011-03-15  9:11 ` [PATCH 14/15] GFS2: Adding missing unlock_page() Steven Whitehouse
2011-03-15  9:11 ` [PATCH 15/15] GFS2: Don't use _raw version of RCU dereference Steven Whitehouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1300180305-5993-12-git-send-email-swhiteho@redhat.com \
    --to=swhiteho@redhat.com \
    --cc=bmarzins@redhat.com \
    --cc=cluster-devel@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®