From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org
Subject: [PATCH 00/32] Blackfin updates for 2.6.39-rc0
Date: Fri, 18 Mar 2011 14:11:17 -0400 [thread overview]
Message-ID: <1300471877-3544-1-git-send-email-vapier@gentoo.org> (raw)
Other than the normal random fixes, we've got a bunch of SMP updates,
IRQ cleanups, and ipipe updates. Boring stuff.
Aaron Wu (1):
Blackfin: bf548-ezkit: add CAN1 support
Andreas Schallenberg (1):
Blackfin: dnp5370: drop MMC card detect support
Graf Yang (1):
Blackfin: SMP: implement cpu_freq support
Michael Hennerich (1):
Blackfin: cpufreq: fix typos
Mike Frysinger (9):
Blackfin: add bfin_write_{or,and} helpers
Blackfin: ADI boards: enable pseudo debug insns support
Blackfin: SMP: use standard cache functions
Blackfin: split optimization settings more
Blackfin: optimize startup code
Blackfin: SMP: convert to irq chip functions
Blackfin: wire up new syscalls
Blackfin: punt unused HDMA masks
Blackfin: ip0x: fix unused variable warning
Philippe Gerum (3):
Blackfin/ipipe: upgrade to I-pipe mainline
Blackfin/ipipe: fix deferred pipeline sync for the root stage
Blackfin/ipipe: restore pipeline bits in irqflags
Sonic Zhang (4):
Blackfin: SMP: avoid section mismatch warnings
Blackfin: kgdb: drop dead KGDB_THR_PROC_SWAP for SMP systems
Blackfin: SMP: disable preempt with smp_processor_id to send messages
Blackfin: SMP: work around anomaly 05000491
Thomas Gleixner (9):
Blackfin: use proper wrappers for irq_desc
Blackfin: convert core irq_chip to new functions
Blackfin: convert internal irq_chip to new functions
Blackfin: convert error irq_chip to new functions
Blackfin: convert mac irq_chip to new functions
Blackfin: convert gpio irq_chip to new functions
Blackfin: use proper wrapper functions for modifying irq status
Blackfin: use accessor functions in show_interrupts()
Blackfin: enable GENERIC_HARDIRQS_NO_DEPRECATED
steven miao (3):
Blackfin: bf54x: add kconfig for UART2/3 DMA channel assignments
Blackfin: SMP: PERCPU section should be PAGE aligned
Blackfin: SMP: delay enabling caches until CPU is initialized
arch/blackfin/Kconfig | 42 +++-
arch/blackfin/configs/BF518F-EZBRD_defconfig | 1 +
arch/blackfin/configs/BF526-EZBRD_defconfig | 1 +
arch/blackfin/configs/BF527-EZKIT-V2_defconfig | 1 +
arch/blackfin/configs/BF527-EZKIT_defconfig | 1 +
arch/blackfin/configs/BF533-EZKIT_defconfig | 1 +
arch/blackfin/configs/BF533-STAMP_defconfig | 1 +
arch/blackfin/configs/BF537-STAMP_defconfig | 1 +
arch/blackfin/configs/BF538-EZKIT_defconfig | 1 +
arch/blackfin/configs/BF548-EZKIT_defconfig | 1 +
arch/blackfin/configs/BF561-EZKIT-SMP_defconfig | 1 +
arch/blackfin/configs/BF561-EZKIT_defconfig | 1 +
arch/blackfin/include/asm/def_LPBlackfin.h | 16 ++-
arch/blackfin/include/asm/dpmc.h | 3 +
arch/blackfin/include/asm/ipipe.h | 95 +++------
arch/blackfin/include/asm/ipipe_base.h | 11 +-
arch/blackfin/include/asm/irqflags.h | 87 +++++++-
arch/blackfin/include/asm/smp.h | 9 +-
arch/blackfin/include/asm/unistd.h | 5 +-
arch/blackfin/kernel/bfin_dma_5xx.c | 32 ++--
arch/blackfin/kernel/ipipe.c | 84 ++++----
arch/blackfin/kernel/irqchip.c | 10 +-
arch/blackfin/kernel/kgdb.c | 4 -
arch/blackfin/kernel/setup.c | 37 ++++
arch/blackfin/kernel/vmlinux.lds.S | 3 +-
arch/blackfin/mach-bf518/include/mach/defBF512.h | 19 --
arch/blackfin/mach-bf527/include/mach/defBF522.h | 19 --
arch/blackfin/mach-bf533/boards/ip0x.c | 2 -
arch/blackfin/mach-bf537/boards/cm_bf537e.c | 2 +-
arch/blackfin/mach-bf537/boards/cm_bf537u.c | 2 +-
arch/blackfin/mach-bf537/boards/dnp5370.c | 20 --
arch/blackfin/mach-bf537/boards/tcm_bf537.c | 2 +-
arch/blackfin/mach-bf537/include/mach/defBF534.h | 18 --
arch/blackfin/mach-bf548/Kconfig | 59 ++++++
arch/blackfin/mach-bf548/boards/ezkit.c | 55 +++++-
arch/blackfin/mach-bf548/include/mach/defBF544.h | 18 --
arch/blackfin/mach-bf548/include/mach/defBF547.h | 19 --
arch/blackfin/mach-bf548/include/mach/dma.h | 28 +++-
arch/blackfin/mach-bf548/include/mach/irq.h | 4 -
arch/blackfin/mach-bf561/boards/cm_bf561.c | 2 +-
arch/blackfin/mach-bf561/hotplug.c | 21 +-
arch/blackfin/mach-bf561/secondary.S | 35 ++--
arch/blackfin/mach-bf561/smp.c | 15 +-
arch/blackfin/mach-common/arch_checks.c | 2 +-
arch/blackfin/mach-common/cache.S | 38 +++-
arch/blackfin/mach-common/cpufreq.c | 8 +-
arch/blackfin/mach-common/dpmc.c | 50 +++++-
arch/blackfin/mach-common/entry.S | 14 ++
arch/blackfin/mach-common/head.S | 110 ++++-------
arch/blackfin/mach-common/interrupt.S | 6 +-
arch/blackfin/mach-common/ints-priority.c | 236 +++++++++++++---------
arch/blackfin/mach-common/smp.c | 28 ++-
52 files changed, 762 insertions(+), 519 deletions(-)
--
1.7.4.1
next reply other threads:[~2011-03-18 18:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-18 18:11 Mike Frysinger [this message]
2011-03-18 18:12 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2011-03-19 9:19 ` [PATCH 00/32] Blackfin updates for 2.6.39-rc0 Richard Cochran
2011-03-19 17:06 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300471877-3544-1-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®