[RFC 1/4] sdhci: allow for multiple delays when sending commands

["Luis R. Rodriguez" <lrodriguez@atheros.com>]

This is at least known to be required for the ENE 714.

Cc: Chris Ball <cjb@laptop.org>
Cc: Kalle Valo <kvalo@adurom.com>
Cc: Naveen Singh <nsingh@atheros.com>
Cc: Vipin Mehta <Vipin.Mehta@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
 drivers/mmc/host/sdhci.c |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9e15f41..c95dfc2 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -891,8 +891,8 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 
 	WARN_ON(host->cmd);
 
-	/* Wait max 10 ms */
-	timeout = 10;
+	/* Wait max this amount of ms */
+	timeout = (10*256) + 255;
 
 	mask = SDHCI_CMD_INHIBIT;
 	if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
@@ -913,7 +913,8 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 			return;
 		}
 		timeout--;
-		mdelay(1);
+		if (!(timeout & 0xFF))
+			mdelay(1);
 	}
 
 	mod_timer(&host->timer, jiffies + 10 * HZ);
-- 
1.7.4.15.g7811d