mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Shawn Guo <shawn.guo@linaro.org>
To: devicetree-discuss@lists.ozlabs.org, linux-mmc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linaro-dev@lists.linaro.org,
	patches@linaro.org, sameo@linux.intel.com,
	grant.likely@secretlab.ca, Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH 3/5] mmc: sdhci: make sdhci-dove driver self registered
Date: Mon, 21 Mar 2011 16:07:01 +0800	[thread overview]
Message-ID: <1300694823-8300-4-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1300694823-8300-1-git-send-email-shawn.guo@linaro.org>

The patch adds sdhci-dove its own .probe and .remove which in turn
call into the common functions provided by sdhci-pltfm.c, so that
sdhci-dove driver registers itself and keep all sdhci-dove specific
things like sdhci_dove_pdata away from sdhci-pltfm.c which is common.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/mmc/host/sdhci-dove.c  |   70 ++++++++++++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci-pltfm.c |    3 --
 drivers/mmc/host/sdhci-pltfm.h |    1 -
 3 files changed, 68 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index 2aeef4f..e985338 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -3,7 +3,7 @@
  *
  * Author: Saeed Bishara <saeed@marvell.com>
  *	   Mike Rapoport <mike@compulab.co.il>
- * Based on sdhci-cns3xxx.c
+ * Based on sdhci-dove.c
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -61,10 +61,76 @@ static struct sdhci_ops sdhci_dove_ops = {
 	.read_l	= sdhci_dove_readl,
 };
 
-struct sdhci_pltfm_data sdhci_dove_pdata = {
+static struct sdhci_pltfm_data sdhci_dove_pdata = {
 	.ops	= &sdhci_dove_ops,
 	.quirks	= SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
 		  SDHCI_QUIRK_NO_BUSY_IRQ |
 		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
 		  SDHCI_QUIRK_FORCE_DMA,
 };
+
+static int __devinit sdhci_dove_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	int ret;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_dove_pdata);
+	if (!host)
+		return -ENOMEM;
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_add_host;
+
+	return 0;
+
+err_add_host:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int __devexit sdhci_dove_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	int dead = 0;
+	u32 scratch;
+
+	scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+	if (scratch == (u32)-1)
+		dead = 1;
+
+	sdhci_remove_host(pdev, dead);
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+static struct platform_driver sdhci_dove_driver = {
+	.driver		= {
+		.name	= "sdhci-dove",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= sdhci_dove_probe,
+	.remove		= __devexit_p(sdhci_dove_remove),
+#ifdef CONFIG_PM
+	.suspend	= sdhci_pltfm_suspend,
+	.resume		= sdhci_pltfm_resume,
+#endif
+};
+
+static int __init sdhci_dove_init(void)
+{
+	return platform_driver_register(&sdhci_dove_driver);
+}
+
+static void __exit sdhci_dove_exit(void)
+{
+	platform_driver_unregister(&sdhci_dove_driver);
+}
+
+module_init(sdhci_dove_init);
+module_exit(sdhci_dove_exit);
+
+MODULE_DESCRIPTION("SDHCI driver for Dove");
+MODULE_AUTHOR("Saeed Bishara <saeed@marvell.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index b9a904d..c4bba33 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -272,9 +272,6 @@ static int __devexit sdhci_pltfm_remove(struct platform_device *pdev)
 
 static const struct platform_device_id sdhci_pltfm_ids[] = {
 	{ "sdhci", },
-#ifdef CONFIG_MMC_SDHCI_DOVE
-	{ "sdhci-dove", (kernel_ulong_t)&sdhci_dove_pdata },
-#endif
 #ifdef CONFIG_MMC_SDHCI_TEGRA
 	{ "sdhci-tegra", (kernel_ulong_t)&sdhci_tegra_pdata },
 #endif
diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h
index 493a8d0..d7267f0 100644
--- a/drivers/mmc/host/sdhci-pltfm.h
+++ b/drivers/mmc/host/sdhci-pltfm.h
@@ -21,7 +21,6 @@ struct sdhci_pltfm_host {
 	u32 scratchpad; /* to handle quirks across io-accessor calls */
 };
 
-extern struct sdhci_pltfm_data sdhci_dove_pdata;
 extern struct sdhci_pltfm_data sdhci_tegra_pdata;
 extern struct sdhci_pltfm_data sdhci_tegra_dt_pdata;
 
-- 
1.7.1


  parent reply	other threads:[~2011-03-21  8:04 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-21  8:06 [PATCH 0/5] make sdhci device drivers " Shawn Guo
2011-03-21  8:06 ` [PATCH 1/5] mmc: sdhci: make sdhci-esdhc-imx driver " Shawn Guo
2011-03-24  4:28   ` Grant Likely
2011-03-25  9:36     ` Shawn Guo
2011-03-21  8:07 ` [PATCH 2/5] mmc: sdhci: make sdhci-cns3xxx " Shawn Guo
2011-03-21  8:07 ` Shawn Guo [this message]
2011-03-21  8:07 ` [PATCH 4/5] mmc: sdhci: make sdhci-tegra " Shawn Guo
2011-03-21  8:07 ` [PATCH 5/5] mmc: sdhci: update Makefile/Kconfig for sdhci_pltfm change Shawn Guo
2011-03-21 12:39 ` [PATCH 0/5] make sdhci device drivers self registered Arnd Bergmann
2011-03-21 12:52   ` Shawn Guo
2011-03-21 12:54   ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1300694823-8300-4-git-send-email-shawn.guo@linaro.org \
    --to=shawn.guo@linaro.org \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=linaro-dev@lists.linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=patches@linaro.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®