From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@slimlogic.co.uk>,
David Collins <collinsd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] regulator: When constraining modes fall back to higher power modes
Date: Wed, 30 Mar 2011 06:29:12 +0900 [thread overview]
Message-ID: <1301434152-16393-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
If a mode requested by a consumer is not allowed by constraints
automatically fall back to a higher power mode if possible. This
ensures that consumers get at least the output they requested while
allowing machine drivers to transparently limit lower power modes
if required.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
I've not actually had a chance to test this but throwing it out there
for comment and testing now; someone with an OMAP board can probably
test fairly quickly as the OMAP HSMMC driver is using set_mode().
drivers/regulator/core.c | 24 +++++++++++++++---------
1 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 3ffc697..a634946 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -197,9 +197,9 @@ static int regulator_check_current_limit(struct regulator_dev *rdev,
}
/* operating mode constraint check */
-static int regulator_check_mode(struct regulator_dev *rdev, int mode)
+static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
{
- switch (mode) {
+ switch (*mode) {
case REGULATOR_MODE_FAST:
case REGULATOR_MODE_NORMAL:
case REGULATOR_MODE_IDLE:
@@ -217,11 +217,17 @@ static int regulator_check_mode(struct regulator_dev *rdev, int mode)
rdev_err(rdev, "operation not allowed\n");
return -EPERM;
}
- if (!(rdev->constraints->valid_modes_mask & mode)) {
- rdev_err(rdev, "invalid mode %x\n", mode);
- return -EINVAL;
+
+ /* The modes are bitmasks, the most power hungry modes having
+ * the lowest values. If the requested mode isn't supported
+ * try higher modes. */
+ while (*mode) {
+ if (rdev->constraints->valid_modes_mask & *mode)
+ return 0;
+ *mode /= 2;
}
- return 0;
+
+ return -EINVAL;
}
/* dynamic regulator mode switching constraint check */
@@ -612,7 +618,7 @@ static void drms_uA_update(struct regulator_dev *rdev)
output_uV, current_uA);
/* check the new mode is allowed */
- err = regulator_check_mode(rdev, mode);
+ err = regulator_mode_constrain(rdev, &mode);
if (err == 0)
rdev->desc->ops->set_mode(rdev, mode);
}
@@ -2005,7 +2011,7 @@ int regulator_set_mode(struct regulator *regulator, unsigned int mode)
}
/* constraints check */
- ret = regulator_check_mode(rdev, mode);
+ ret = regulator_mode_constrain(rdev, mode);
if (ret < 0)
goto out;
@@ -2116,7 +2122,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
mode = rdev->desc->ops->get_optimum_mode(rdev,
input_uV, output_uV,
total_uA_load);
- ret = regulator_check_mode(rdev, mode);
+ ret = regulator_mode_constrain(rdev, &mode);
if (ret < 0) {
rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n",
total_uA_load, input_uV, output_uV);
--
1.7.4.1
next reply other threads:[~2011-03-29 21:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-29 21:29 Mark Brown [this message]
2011-03-29 23:29 ` Liam Girdwood
2011-03-29 23:39 ` Mark Brown
2011-03-30 19:14 ` Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301434152-16393-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=collinsd@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome