From: raz ben yehuda <raz@scalemp.com>
To: arjan@infradead.org
Cc: linux-kernel@vger.kernel.org
Subject: aynchronous scan fails to boot
Date: Thu, 07 Apr 2011 15:23:47 +0300 [thread overview]
Message-ID: <1302179027.11185.15.camel@raz.scalemp.com> (raw)
Arjan Hello
I am trying to boot a machine with 7 LSI disks instances so you
obviously understand that your new feature of asynchronous scsi probe
was more than appealing.
Two problems:
1. Somehow, if the machine is boot all its cpus the boot hangs[1]. It
succeeds only when maxcpus=1 [2].
2. async scsi probing does not seem to speed things at all[3].
Thank you
raz
[1]
[ 1.540000] Pid: 1, comm: swapper Not tainted 2.6.38-2.vSMP #1
[ 1.540000] Call Trace:
[ 1.540000] <NMI> [<ffffffff81045c31>] ? intel_pmu_handle_irq
+0x471/0x480
[ 1.540000] [<fffffgfff81045c31>] ? intel_pmu_handle_irq+0x471/0x480
[ 1.540000] [<ffffffff81074bec>] ? warn_slowpath_common+0x8c/0xc0
[ 1.540000] [<ffffffff81074cf6>] ? warn_slowpath_fmt+0x56/0x60
[ 1.540000] [<ffffffff81041cca>] ? x86_perf_event_update+0x5a/0xc0
[ 1.540000] [<ffffffff81043093>] ? x86_perf_event_set_period
+0xe3/0x180
[ 1.540000] [<ffffffff81045c31>] ? intel_pmu_handle_irq+0x471/0x480
[ 1.540000] [<ffffffff81044d31>] ? perf_event_nmi_handler+0x41/0xb0
[ 1.540000] [<ffffffff81092315>] ? notifier_call_chain+0x45/0x90
[ 1.540000] [<ffffffff810923ed>] ? notify_die+0x2d/0x40
[ 1.540000] [<ffffffff81035a94>] ? do_nmi+0x64/0x220
[ 1.540000] [<ffffffff815eafb0>] ? nmi+0x20/0x30
[ 1.540000] [<ffffffff812d6810>] ? delay_tsc+0x0/0x80
[ 1.540000] [<ffffffff8103c570>] ? native_read_tsc+0x0/0x20
[ 1.540000] <<EOE>> [<ffffffff812d685a>] ? delay_tsc+0x4a/0x80
[ 1.540000] [<ffffffff815e4625>] ? native_cpu_up+0x495/0x770
[ 1.540000] [<ffffffff815e3b80>] ? do_fork_idle+0x0/0x20
[ 1.540000] [<ffffffff815e62a7>] ? cpu_up+0xf7/0x140
[ 1.540000] [<ffffffff81b57b58>] ? kernel_init+0x238/0x350
[ 1.540000] [<ffffffff810350e4>] ? kernel_thread_helper+0x4/0x10
[ 1.540000] [<ffffffff81b57920>] ? kernel_init+0x0/0x350
[ 1.540000] [<ffffffff810350e0>] ? kernel_thread_helper+0x0/0x10
[ 1.540000] ---[ end trace 4eaa2a86a8e2da22 ]---
[2] This machine has 84 processors.
[3] each disk boots about 30 seconds. entire boot take is allways over
210 seconds.The bellow is a snippet of boot dmesg.
[ 162.243568] sd 4:0:1:0: [sdj] Attached SCSI disk
[ 163.600064] ioc5: LSISAS1068E B3: Capabilities={Initiator}
[ 163.606298] mptsas 0000:52:00.0: setting latency timer to 64
[ 193.544630] scsi5 : ioc5: LSISAS1068E B3, FwRev=00192f00h, Ports=1,
MaxQ=266, IRQ=48
[ 193.596180] mptsas: ioc5: attaching ssp device: fw_channel 0, fw_id
0, phy 0, sas_addr 0x5000c5001735fbb5
[ 193.607870] scsi 5:0:0:0: Direct-Access SEAGATE ST9146803SS
FS04 PQ: 0 ANSI: 5
[ 193.618903] sd 5:0:0:0: Attached scsi generic sg10 type 0
[ 193.625086] sd 5:0:0:0: [sdk] 286749480 512-byte logical blocks: (146
GB/136 GiB)
[ 193.634607] mptsas: ioc5: attaching ssp device: fw_channel 0, fw_id
1, phy 1, sas_addr 0x5000c50017360b61
[ 193.645609] sd 5:0:0:0: [sdk] Write Protect is off
[ 193.650740] sd 5:0:0:0: [sdk] Mode Sense: b3 00 10 08
[ 193.651233] scsi 5:0:1:0: Direct-Access SEAGATE ST9146803SS
FS04 PQ: 0 ANSI: 5
[ 193.660595] sd 5:0:0:0: [sdk] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 193.671527] sd 5:0:1:0: Attached scsi generic sg11 type 0
[ 193.677776] sd 5:0:1:0: [sdl] 286749480 512-byte logical blocks: (146
GB/136 GiB)
[ 193.687686] mptsas 0000:62:00.0: PCI INT A -> GSI 53 (level, low) ->
IRQ 53
[ 193.695322] mptbase: ioc6: Initiating bringup
[ 193.700204] sd 5:0:1:0: [sdl] Write Protect is off
[ 193.705304] sd 5:0:1:0: [sdl] Mode Sense: b3 00 10 08
[ 193.705355] sdk: sdk1 sdk2 sdk3
reply other threads:[~2011-04-07 13:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302179027.11185.15.camel@raz.scalemp.com \
--to=raz@scalemp.com \
--cc=arjan@infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®