mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joerg Roedel <joerg.roedel@amd.com>
To: <iommu@lists.linux-foundation.org>,
	Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
	Joerg Roedel <joerg.roedel@amd.com>
Subject: [PATCH 1/5] PCI: Move ATS declarations in seperate header file
Date: Fri, 8 Apr 2011 10:17:06 +0200	[thread overview]
Message-ID: <1302250630-8183-2-git-send-email-joerg.roedel@amd.com> (raw)
In-Reply-To: <1302250630-8183-1-git-send-email-joerg.roedel@amd.com>

This patch moves the relevant declarations from the local
header file in drivers/pci to a more accessible locations so
that it can be used by the AMD IOMMU driver too.
The file is named pci-ats-pri.h because support for the PCI
PRI capability will also be added there in a later
patch-set.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 drivers/pci/intel-iommu.c |    1 +
 drivers/pci/iov.c         |    1 +
 drivers/pci/pci.h         |   37 --------------------------------
 include/linux/pci-ats.h   |   52 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 54 insertions(+), 37 deletions(-)
 create mode 100644 include/linux/pci-ats.h

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 7da3bef..fdb2cef 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,6 +39,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/tboot.h>
 #include <linux/dmi.h>
+#include <linux/pci-ats.h>
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
 #include "pci.h"
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 553d8ee..42fae47 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -13,6 +13,7 @@
 #include <linux/mutex.h>
 #include <linux/string.h>
 #include <linux/delay.h>
+#include <linux/pci-ats.h>
 #include "pci.h"
 
 #define VIRTFN_ID_LEN	16
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a6ec200..4020025 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -250,15 +250,6 @@ struct pci_sriov {
 	u8 __iomem *mstate;	/* VF Migration State Array */
 };
 
-/* Address Translation Service */
-struct pci_ats {
-	int pos;	/* capability position */
-	int stu;	/* Smallest Translation Unit */
-	int qdep;	/* Invalidate Queue Depth */
-	int ref_cnt;	/* Physical Function reference count */
-	unsigned int is_enabled:1;	/* Enable bit is set */
-};
-
 #ifdef CONFIG_PCI_IOV
 extern int pci_iov_init(struct pci_dev *dev);
 extern void pci_iov_release(struct pci_dev *dev);
@@ -269,19 +260,6 @@ extern resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev,
 extern void pci_restore_iov_state(struct pci_dev *dev);
 extern int pci_iov_bus_range(struct pci_bus *bus);
 
-extern int pci_enable_ats(struct pci_dev *dev, int ps);
-extern void pci_disable_ats(struct pci_dev *dev);
-extern int pci_ats_queue_depth(struct pci_dev *dev);
-/**
- * pci_ats_enabled - query the ATS status
- * @dev: the PCI device
- *
- * Returns 1 if ATS capability is enabled, or 0 if not.
- */
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return dev->ats && dev->ats->is_enabled;
-}
 #else
 static inline int pci_iov_init(struct pci_dev *dev)
 {
@@ -304,21 +282,6 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
 	return 0;
 }
 
-static inline int pci_enable_ats(struct pci_dev *dev, int ps)
-{
-	return -ENODEV;
-}
-static inline void pci_disable_ats(struct pci_dev *dev)
-{
-}
-static inline int pci_ats_queue_depth(struct pci_dev *dev)
-{
-	return -ENODEV;
-}
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return 0;
-}
 #endif /* CONFIG_PCI_IOV */
 
 static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
new file mode 100644
index 0000000..655824f
--- /dev/null
+++ b/include/linux/pci-ats.h
@@ -0,0 +1,52 @@
+#ifndef LINUX_PCI_ATS_H
+#define LINUX_PCI_ATS_H
+
+/* Address Translation Service */
+struct pci_ats {
+	int pos;        /* capability position */
+	int stu;        /* Smallest Translation Unit */
+	int qdep;       /* Invalidate Queue Depth */
+	int ref_cnt;    /* Physical Function reference count */
+	unsigned int is_enabled:1;      /* Enable bit is set */
+};
+
+#ifdef CONFIG_PCI_IOV
+
+extern int pci_enable_ats(struct pci_dev *dev, int ps);
+extern void pci_disable_ats(struct pci_dev *dev);
+extern int pci_ats_queue_depth(struct pci_dev *dev);
+/**
+ * pci_ats_enabled - query the ATS status
+ * @dev: the PCI device
+ *
+ * Returns 1 if ATS capability is enabled, or 0 if not.
+ */
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return dev->ats && dev->ats->is_enabled;
+}
+
+#else /* CONFIG_PCI_IOV */
+
+static inline int pci_enable_ats(struct pci_dev *dev, int ps)
+{
+	return -ENODEV;
+}
+
+static inline void pci_disable_ats(struct pci_dev *dev)
+{
+}
+
+static inline int pci_ats_queue_depth(struct pci_dev *dev)
+{
+	return -ENODEV;
+}
+
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PCI_IOV */
+
+#endif /* LINUX_PCI_ATS_H*/
-- 
1.7.1



  reply	other threads:[~2011-04-08  8:18 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-08  8:17 [PATCH 0/5] ATS support for AMD IOMMU driver Joerg Roedel
2011-04-08  8:17 ` Joerg Roedel [this message]
2011-04-08 15:25   ` [PATCH 1/5] PCI: Move ATS declarations in seperate header file Jesse Barnes
2011-04-08 18:33   ` Rolf Eike Beer
2011-04-11  6:20     ` Roedel, Joerg
2011-04-08  8:17 ` [PATCH 2/5] x86/amd-iommu: Select PCI_IOV with AMD IOMMU driver Joerg Roedel
2011-04-08  8:17 ` [PATCH 3/5] x86/amd-iommu: Flush device IOTLB if ATS is enabled Joerg Roedel
2011-04-08  8:17 ` [PATCH 4/5] x86/amd-iommu: Add flag to indicate IOTLB support Joerg Roedel
2011-04-08  8:17 ` [PATCH 5/5] x86/amd-iommu: Add ATS enable/disable code Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1302250630-8183-2-git-send-email-joerg.roedel@amd.com \
    --to=joerg.roedel@amd.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®