From: pavan_savoy@ti.com
To: greg@kroah.com, linux-kernel@vger.kernel.org
Cc: pavan_savoy@sify.com, Pavan Savoy <pavan_savoy@ti.com>
Subject: [PATCH 1/3] drivers:misc:ti-st: handle delayed tty receive
Date: Fri, 8 Apr 2011 04:57:42 -0500 [thread overview]
Message-ID: <1302256664-23688-2-git-send-email-pavan_savoy@ti.com> (raw)
In-Reply-To: <1302256664-23688-1-git-send-email-pavan_savoy@ti.com>
From: Pavan Savoy <pavan_savoy@ti.com>
When certain technologies shutdown their interface without waiting for
the acknowledgement from the chip. The receive_buf from the TTY would be
invoked a while after the relevant technology is unregistered.
This patch introduces a new flag "is_registered" which maintains the
state of protocols BT, FM or GPS and thereby removes the need to clear
the protocol data from ST when protocols gets unregistered.
This fixes corner cases when HCI RESET is sent down from bluetooth stack
and the receive_buf is called from tty after 250ms before which
bluetooth would have unregistered from the system.
OR - when FM application decides to close down the device without
sending a power-off FM command resulting in some RDS data or interrupt
data coming in after the driver is unregistered.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
drivers/misc/ti-st/st_core.c | 23 +++++++++++++----------
include/linux/ti_wilink_st.h | 3 ++-
2 files changed, 15 insertions(+), 11 deletions(-)
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 486117f..f91f82e 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -43,13 +43,15 @@ static void add_channel_to_table(struct st_data_s *st_gdata,
pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
/* list now has the channel id as index itself */
st_gdata->list[new_proto->chnl_id] = new_proto;
+ st_gdata->is_registered[new_proto->chnl_id] = true;
}
static void remove_channel_from_table(struct st_data_s *st_gdata,
struct st_proto_s *proto)
{
pr_info("%s: id %d\n", __func__, proto->chnl_id);
- st_gdata->list[proto->chnl_id] = NULL;
+/* st_gdata->list[proto->chnl_id] = NULL; */
+ st_gdata->is_registered[proto->chnl_id] = false;
}
/*
@@ -104,7 +106,7 @@ void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
if (unlikely
(st_gdata == NULL || st_gdata->rx_skb == NULL
- || st_gdata->list[chnl_id] == NULL)) {
+ || st_gdata->is_registered[chnl_id] == false)) {
pr_err("chnl_id %d not registered, no data to send?",
chnl_id);
kfree_skb(st_gdata->rx_skb);
@@ -141,14 +143,15 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
unsigned char i = 0;
pr_info(" %s ", __func__);
for (i = 0; i < ST_MAX_CHANNELS; i++) {
- if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
- st_gdata->list[i]->reg_complete_cb != NULL)) {
+ if (likely(st_gdata != NULL &&
+ st_gdata->is_registered[i] == true &&
+ st_gdata->list[i]->reg_complete_cb != NULL)) {
st_gdata->list[i]->reg_complete_cb
(st_gdata->list[i]->priv_data, err);
pr_info("protocol %d's cb sent %d\n", i, err);
if (err) { /* cleanup registered protocol */
st_gdata->protos_registered--;
- st_gdata->list[i] = NULL;
+ st_gdata->is_registered[i] = false;
}
}
}
@@ -475,9 +478,9 @@ void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
{
seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
st_gdata->protos_registered,
- st_gdata->list[0x04] != NULL ? 'R' : 'U',
- st_gdata->list[0x08] != NULL ? 'R' : 'U',
- st_gdata->list[0x09] != NULL ? 'R' : 'U');
+ st_gdata->is_registered[0x04] == true ? 'R' : 'U',
+ st_gdata->is_registered[0x08] == true ? 'R' : 'U',
+ st_gdata->is_registered[0x09] == true ? 'R' : 'U');
}
/********************************************************************/
@@ -504,7 +507,7 @@ long st_register(struct st_proto_s *new_proto)
return -EPROTONOSUPPORT;
}
- if (st_gdata->list[new_proto->chnl_id] != NULL) {
+ if (st_gdata->is_registered[new_proto->chnl_id] == true) {
pr_err("chnl_id %d already registered", new_proto->chnl_id);
return -EALREADY;
}
@@ -563,7 +566,7 @@ long st_register(struct st_proto_s *new_proto)
/* check for already registered once more,
* since the above check is old
*/
- if (st_gdata->list[new_proto->chnl_id] != NULL) {
+ if (st_gdata->is_registered[new_proto->chnl_id] == true) {
pr_err(" proto %d already registered ",
new_proto->chnl_id);
return -EALREADY;
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 7071ec5..b004e55 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -140,12 +140,12 @@ extern long st_unregister(struct st_proto_s *);
*/
struct st_data_s {
unsigned long st_state;
- struct tty_struct *tty;
struct sk_buff *tx_skb;
#define ST_TX_SENDING 1
#define ST_TX_WAKEUP 2
unsigned long tx_state;
struct st_proto_s *list[ST_MAX_CHANNELS];
+ bool is_registered[ST_MAX_CHANNELS];
unsigned long rx_state;
unsigned long rx_count;
struct sk_buff *rx_skb;
@@ -155,6 +155,7 @@ struct st_data_s {
unsigned char protos_registered;
unsigned long ll_state;
void *kim_data;
+ struct tty_struct *tty;
};
/*
--
1.7.0.4
next prev parent reply other threads:[~2011-04-08 9:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-08 9:57 [PATCH 0/3] shared transport robustness fixes pavan_savoy
2011-04-08 9:57 ` pavan_savoy [this message]
2011-04-08 9:57 ` [PATCH 2/3] drivers:misc:ti-st: remove rfkill dependency pavan_savoy
2011-04-08 9:57 ` [PATCH 3/3] drivers:misc:ti-st: fix skip remote baud logic pavan_savoy
2011-04-23 0:00 ` Greg KH
2011-04-09 19:30 ` [PATCH 2/3] drivers:misc:ti-st: remove rfkill dependency Valdis.Kletnieks
2011-04-10 11:01 ` Pavan Savoy
2011-04-14 12:24 ` [PATCH 0/3] shared transport robustness fixes Pavan Savoy
2011-04-14 17:15 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302256664-23688-2-git-send-email-pavan_savoy@ti.com \
--to=pavan_savoy@ti.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pavan_savoy@sify.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®