[PATCH 3/8] staging/mei: MEI "Link" layer code - MEI Hardware communications.

[Oren Weil <oren.jer.weil@intel.com>]

functions that handle the communication between clients.
e.g. connect/disconnect to/from a client, send MEI message,
read MEI message, flow control handling.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
---
 drivers/staging/mei/interface.c |  440 +++++++++++++++++++++++++++++++++++++++
 drivers/staging/mei/interface.h |  124 +++++++++++
 2 files changed, 564 insertions(+), 0 deletions(-)
 create mode 100644 drivers/staging/mei/interface.c
 create mode 100644 drivers/staging/mei/interface.h

diff --git a/drivers/staging/mei/interface.c b/drivers/staging/mei/interface.c
new file mode 100644
index 0000000..620770b
--- /dev/null
+++ b/drivers/staging/mei/interface.c
@@ -0,0 +1,440 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/pci.h>
+#include "mei.h"
+#include "interface.h"
+
+
+
+/**
+ * mei_set_csr_register - writes H_CSR register to the mei device,
+ * and ignores the H_IS bit for it is write-one-to-zero.
+ *
+ * @dev: the device structure
+ */
+void mei_hcsr_set(struct mei_device *dev)
+{
+	if ((dev->host_hw_state & H_IS) == H_IS)
+		dev->host_hw_state &= ~H_IS;
+	mei_reg_write(dev, H_CSR, dev->host_hw_state);
+	dev->host_hw_state = mei_hcsr_read(dev);
+}
+
+/**
+ * mei_csr_enable_interrupts - enables mei device interrupts
+ *
+ * @dev: the device structure
+ */
+void mei_enable_interrupts(struct mei_device *dev)
+{
+	dev->host_hw_state |= H_IE;
+	mei_hcsr_set(dev);
+}
+
+/**
+ * mei_csr_disable_interrupts - disables mei device interrupts
+ *
+ * @dev: the device structure
+ */
+void mei_disable_interrupts(struct mei_device *dev)
+{
+	dev->host_hw_state &= ~H_IE;
+	mei_hcsr_set(dev);
+}
+
+/**
+ * _host_get_filled_slots - gets number of device filled buffer slots
+ *
+ * @device: the device structure
+ *
+ * returns number of filled slots
+ */
+static unsigned char _host_get_filled_slots(const struct mei_device *dev)
+{
+	char read_ptr, write_ptr;
+
+	read_ptr = (char) ((dev->host_hw_state & H_CBRP) >> 8);
+	write_ptr = (char) ((dev->host_hw_state & H_CBWP) >> 16);
+
+	return (unsigned char) (write_ptr - read_ptr);
+}
+
+/**
+ * mei_host_buffer_is_empty - checks if host buffer is empty.
+ *
+ * @dev: the device structure
+ *
+ * returns 1 if empty, 0 - otherwise.
+ */
+int mei_host_buffer_is_empty(struct mei_device *dev)
+{
+	unsigned char filled_slots;
+
+	dev->host_hw_state = mei_hcsr_read(dev);
+	filled_slots = _host_get_filled_slots(dev);
+
+	if (filled_slots == 0)
+		return 1;
+
+	return 0;
+}
+
+/**
+ * mei_count_empty_write_slots - counts write empty slots.
+ *
+ * @dev: the device structure
+ *
+ * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise empty slots count
+ */
+int mei_count_empty_write_slots(struct mei_device *dev)
+{
+	unsigned char buffer_depth, filled_slots, empty_slots;
+
+	dev->host_hw_state = mei_hcsr_read(dev);
+	buffer_depth = (unsigned char) ((dev->host_hw_state & H_CBD) >> 24);
+	filled_slots = _host_get_filled_slots(dev);
+	empty_slots = buffer_depth - filled_slots;
+
+	/* check for overflow */
+	if (filled_slots > buffer_depth)
+		return -EOVERFLOW;
+
+	return empty_slots;
+}
+
+/**
+ * mei_write_message - writes a message to mei device.
+ *
+ * @dev: the device structure
+ * @header: header of message
+ * @write_buffer: message buffer will be written
+ * @write_length: message size will be written
+ *
+ * returns 1 if success, 0 - otherwise.
+ */
+int mei_write_message(struct mei_device *dev,
+			     struct mei_msg_hdr *header,
+			     unsigned char *write_buffer,
+			     unsigned long write_length)
+{
+	u32 temp_msg = 0;
+	unsigned long bytes_written = 0;
+	unsigned char buffer_depth, filled_slots, empty_slots;
+	unsigned long dw_to_write;
+
+	dev->host_hw_state = mei_hcsr_read(dev);
+
+	dev_dbg(&dev->pdev->dev,
+			"host_hw_state = 0x%08x.\n",
+			dev->host_hw_state);
+
+	dev_dbg(&dev->pdev->dev,
+			"mei_write_message header=%08x.\n",
+			*((u32 *) header));
+
+	buffer_depth = (unsigned char) ((dev->host_hw_state & H_CBD) >> 24);
+	filled_slots = _host_get_filled_slots(dev);
+	empty_slots = buffer_depth - filled_slots;
+	dev_dbg(&dev->pdev->dev,
+			"filled = %hu, empty = %hu.\n",
+			filled_slots, empty_slots);
+
+	dw_to_write = ((write_length + 3) / 4);
+
+	if (dw_to_write > empty_slots)
+		return 0;
+
+	mei_reg_write(dev, H_CB_WW, *((u32 *) header));
+
+	while (write_length >= 4) {
+		mei_reg_write(dev, H_CB_WW,
+				*(u32 *) (write_buffer + bytes_written));
+		bytes_written += 4;
+		write_length -= 4;
+	}
+
+	if (write_length > 0) {
+		memcpy(&temp_msg, &write_buffer[bytes_written], write_length);
+		mei_reg_write(dev, H_CB_WW, temp_msg);
+	}
+
+	dev->host_hw_state |= H_IG;
+	mei_hcsr_set(dev);
+	dev->me_hw_state = mei_mecsr_read(dev);
+	if ((dev->me_hw_state & ME_RDY_HRA) != ME_RDY_HRA)
+		return 0;
+
+	dev->write_hang = 0;
+	return 1;
+}
+
+/**
+ * mei_count_full_read_slots - counts read full slots.
+ *
+ * @dev: the device structure
+ *
+ * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise filled slots count
+ */
+int mei_count_full_read_slots(struct mei_device *dev)
+{
+	char read_ptr, write_ptr;
+	unsigned char buffer_depth, filled_slots;
+
+	dev->me_hw_state = mei_mecsr_read(dev);
+	buffer_depth = (unsigned char)((dev->me_hw_state & ME_CBD_HRA) >> 24);
+	read_ptr = (char) ((dev->me_hw_state & ME_CBRP_HRA) >> 8);
+	write_ptr = (char) ((dev->me_hw_state & ME_CBWP_HRA) >> 16);
+	filled_slots = (unsigned char) (write_ptr - read_ptr);
+
+	/* check for overflow */
+	if (filled_slots > buffer_depth)
+		return -EOVERFLOW;
+
+	dev_dbg(&dev->pdev->dev, "filled_slots =%08x\n", filled_slots);
+	return (int)filled_slots;
+}
+
+/**
+ * mei_read_slots - reads a message from mei device.
+ *
+ * @dev: the device structure
+ * @buffer: message buffer will be written
+ * @buffer_length: message size will be read
+ */
+void mei_read_slots(struct mei_device *dev,
+		     unsigned char *buffer, unsigned long buffer_length)
+{
+	u32 i = 0;
+	unsigned char temp_buf[sizeof(u32)];
+
+	while (buffer_length >= sizeof(u32)) {
+		((u32 *) buffer)[i] = mei_mecbrw_read(dev);
+
+		dev_dbg(&dev->pdev->dev,
+				"buffer[%d]= %d\n",
+				i, ((u32 *) buffer)[i]);
+
+		i++;
+		buffer_length -= sizeof(u32);
+	}
+
+	if (buffer_length > 0) {
+		*((u32 *) &temp_buf) = mei_mecbrw_read(dev);
+		memcpy(&buffer[i * 4], temp_buf, buffer_length);
+	}
+
+	dev->host_hw_state |= H_IG;
+	mei_hcsr_set(dev);
+}
+
+/**
+ * mei_flow_ctrl_creds - checks flow_control credentials.
+ *
+ * @dev: the device structure
+ * @file_ext: private data of the file object
+ *
+ * returns 1 if mei_flow_ctrl_creds >0, 0 - otherwise.
+ */
+int mei_flow_ctrl_creds(struct mei_device *dev, struct mei_cl *file_ext)
+{
+	int i;
+
+	if (!dev->num_mei_me_clients)
+		return 0;
+
+	if (file_ext == NULL)
+		return 0;
+
+	if (file_ext->mei_flow_ctrl_creds > 0)
+		return 1;
+
+	for (i = 0; i < dev->num_mei_me_clients; i++) {
+		if (dev->me_clients[i].client_id == file_ext->me_client_id) {
+			if (dev->me_clients[i].mei_flow_ctrl_creds > 0) {
+				BUG_ON(dev->me_clients[i].props.single_recv_buf
+					 == 0);
+				return 1;
+			}
+			return 0;
+		}
+	}
+	BUG();
+	return 0;
+}
+
+/**
+ * mei_flow_ctrl_reduce - reduces flow_control.
+ *
+ * @dev: the device structure
+ * @file_ext: private data of the file object
+ */
+void mei_flow_ctrl_reduce(struct mei_device *dev, struct mei_cl *file_ext)
+{
+	int i;
+
+	if (!dev->num_mei_me_clients)
+		return;
+
+	for (i = 0; i < dev->num_mei_me_clients; i++) {
+		if (dev->me_clients[i].client_id == file_ext->me_client_id) {
+			if (dev->me_clients[i].props.single_recv_buf != 0) {
+				BUG_ON(dev->me_clients[i].mei_flow_ctrl_creds
+						<= 0);
+				dev->me_clients[i].mei_flow_ctrl_creds--;
+			} else {
+				BUG_ON(file_ext->mei_flow_ctrl_creds <= 0);
+				file_ext->mei_flow_ctrl_creds--;
+			}
+			return;
+		}
+	}
+	BUG();
+}
+
+/**
+ * mei_send_flow_control - sends flow control to fw.
+ *
+ * @dev: the device structure
+ * @file_ext: private data of the file object
+ *
+ * returns 1 if success, 0 - otherwise.
+ */
+int mei_send_flow_control(struct mei_device *dev, struct mei_cl *file_ext)
+{
+	struct mei_msg_hdr *mei_hdr;
+	struct hbm_flow_control *mei_flow_control;
+
+	mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
+	mei_hdr->host_addr = 0;
+	mei_hdr->me_addr = 0;
+	mei_hdr->length = sizeof(struct hbm_flow_control);
+	mei_hdr->msg_complete = 1;
+	mei_hdr->reserved = 0;
+
+	mei_flow_control = (struct hbm_flow_control *) &dev->wr_msg_buf[1];
+	memset(mei_flow_control, 0, sizeof(mei_flow_control));
+	mei_flow_control->host_addr = file_ext->host_client_id;
+	mei_flow_control->me_addr = file_ext->me_client_id;
+	mei_flow_control->cmd.cmd = MEI_FLOW_CONTROL_CMD;
+	memset(mei_flow_control->reserved, 0,
+			sizeof(mei_flow_control->reserved));
+	dev_dbg(&dev->pdev->dev, "sending flow control host client = %d, ME client = %d\n",
+	    file_ext->host_client_id, file_ext->me_client_id);
+	if (!mei_write_message(dev, mei_hdr,
+				(unsigned char *) mei_flow_control,
+				sizeof(struct hbm_flow_control)))
+		return 0;
+
+	return 1;
+
+}
+
+/**
+ * mei_other_client_is_connecting - checks if other
+ *    client with the same client id is connected.
+ *
+ * @dev: the device structure
+ * @file_ext: private data of the file object
+ *
+ * returns 1 if other client is connected, 0 - otherwise.
+ */
+int mei_other_client_is_connecting(struct mei_device *dev,
+				struct mei_cl *file_ext)
+{
+	struct mei_cl *file_pos = NULL;
+	struct mei_cl *file_next = NULL;
+
+	list_for_each_entry_safe(file_pos, file_next, &dev->file_list, link) {
+		if ((file_pos->state == MEI_FILE_CONNECTING) &&
+			(file_pos != file_ext) &&
+			file_ext->me_client_id == file_pos->me_client_id)
+			return 1;
+
+	}
+	return 0;
+}
+
+/**
+ * mei_disconnect - sends disconnect message to fw.
+ *
+ * @dev: the device structure
+ * @file_ext: private data of the file object
+ *
+ * returns 1 if success, 0 - otherwise.
+ */
+int mei_disconnect(struct mei_device *dev, struct mei_cl *file_ext)
+{
+	struct mei_msg_hdr *mei_hdr;
+	struct hbm_client_disconnect_request *mei_cli_disconnect;
+
+	mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
+	mei_hdr->host_addr = 0;
+	mei_hdr->me_addr = 0;
+	mei_hdr->length = sizeof(struct hbm_client_disconnect_request);
+	mei_hdr->msg_complete = 1;
+	mei_hdr->reserved = 0;
+
+	mei_cli_disconnect =
+	    (struct hbm_client_disconnect_request *) &dev->wr_msg_buf[1];
+	memset(mei_cli_disconnect, 0, sizeof(mei_cli_disconnect));
+	mei_cli_disconnect->host_addr = file_ext->host_client_id;
+	mei_cli_disconnect->me_addr = file_ext->me_client_id;
+	mei_cli_disconnect->cmd.cmd = CLIENT_DISCONNECT_REQ_CMD;
+	mei_cli_disconnect->reserved[0] = 0;
+
+	if (!mei_write_message(dev, mei_hdr,
+				(unsigned char *) mei_cli_disconnect,
+				sizeof(struct hbm_client_disconnect_request)))
+		return 0;
+
+	return 1;
+}
+
+/**
+ * mei_connect - sends connect message to fw.
+ *
+ * @dev: the device structure
+ * @file_ext: private data of the file object
+ *
+ * returns 1 if success, 0 - otherwise.
+ */
+int mei_connect(struct mei_device *dev, struct mei_cl *file_ext)
+{
+	struct mei_msg_hdr *mei_hdr;
+	struct hbm_client_connect_request *mei_cli_connect;
+
+	mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
+	mei_hdr->host_addr = 0;
+	mei_hdr->me_addr = 0;
+	mei_hdr->length = sizeof(struct hbm_client_connect_request);
+	mei_hdr->msg_complete = 1;
+	mei_hdr->reserved = 0;
+
+	mei_cli_connect =
+	    (struct hbm_client_connect_request *) &dev->wr_msg_buf[1];
+	mei_cli_connect->host_addr = file_ext->host_client_id;
+	mei_cli_connect->me_addr = file_ext->me_client_id;
+	mei_cli_connect->cmd.cmd = CLIENT_CONNECT_REQ_CMD;
+	mei_cli_connect->reserved = 0;
+
+	if (!mei_write_message(dev, mei_hdr,
+				(unsigned char *) mei_cli_connect,
+				sizeof(struct hbm_client_connect_request)))
+		return 0;
+
+	return 1;
+}
diff --git a/drivers/staging/mei/interface.h b/drivers/staging/mei/interface.h
new file mode 100644
index 0000000..1bac32a
--- /dev/null
+++ b/drivers/staging/mei/interface.h
@@ -0,0 +1,124 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+
+
+#ifndef _MEI_INTERFACE_H_
+#define _MEI_INTERFACE_H_
+
+#include <linux/mei.h>
+#include "hw.h"
+
+
+#define HBM_MINOR_VERSION                   0
+#define HBM_MAJOR_VERSION                   1
+#define HBM_TIMEOUT                         1	/* 1 second */
+
+
+#define HOST_START_REQ_CMD                  0x01
+#define HOST_START_RES_CMD                  0x81
+
+#define HOST_STOP_REQ_CMD                   0x02
+#define HOST_STOP_RES_CMD                   0x82
+
+#define ME_STOP_REQ_CMD                     0x03
+
+#define HOST_ENUM_REQ_CMD                   0x04
+#define HOST_ENUM_RES_CMD                   0x84
+
+#define HOST_CLIENT_PROPERTIES_REQ_CMD      0x05
+#define HOST_CLIENT_PROPERTIES_RES_CMD      0x85
+
+#define CLIENT_CONNECT_REQ_CMD              0x06
+#define CLIENT_CONNECT_RES_CMD              0x86
+
+#define CLIENT_DISCONNECT_REQ_CMD           0x07
+#define CLIENT_DISCONNECT_RES_CMD           0x87
+
+#define MEI_FLOW_CONTROL_CMD               0x08
+
+
+#define AMT_WD_VALUE 120	/* seconds */
+
+#define MEI_WATCHDOG_DATA_SIZE         16
+#define MEI_START_WD_DATA_SIZE         20
+#define MEI_WD_PARAMS_SIZE             4
+
+
+enum mei_stop_reason_types {
+	DRIVER_STOP_REQUEST = 0x00,
+	DEVICE_D1_ENTRY = 0x01,
+	DEVICE_D2_ENTRY = 0x02,
+	DEVICE_D3_ENTRY = 0x03,
+	SYSTEM_S1_ENTRY = 0x04,
+	SYSTEM_S2_ENTRY = 0x05,
+	SYSTEM_S3_ENTRY = 0x06,
+	SYSTEM_S4_ENTRY = 0x07,
+	SYSTEM_S5_ENTRY = 0x08
+};
+
+enum me_stop_reason_types {
+	FW_UPDATE = 0x00
+};
+
+enum client_connect_status_types {
+	CCS_SUCCESS = 0x00,
+	CCS_NOT_FOUND = 0x01,
+	CCS_ALREADY_STARTED = 0x02,
+	CCS_OUT_OF_RESOURCES = 0x03,
+	CCS_MESSAGE_SMALL = 0x04
+};
+
+enum client_disconnect_status_types {
+	CDS_SUCCESS = 0x00
+};
+
+
+void mei_read_slots(struct mei_device *dev,
+		     unsigned char *buffer, unsigned long buffer_length);
+
+int mei_write_message(struct mei_device *dev,
+			     struct mei_msg_hdr *header,
+			     unsigned char *write_buffer,
+			     unsigned long write_length);
+
+int mei_host_buffer_is_empty(struct mei_device *dev);
+
+int mei_count_full_read_slots(struct mei_device *dev);
+
+int mei_count_empty_write_slots(struct mei_device *dev);
+
+int mei_flow_ctrl_creds(struct mei_device *dev, struct mei_cl *file_ext);
+
+int mei_wd_send(struct mei_device *dev);
+int mei_wd_stop(struct mei_device *dev, bool preserve);
+void mei_wd_host_init(struct mei_device *dev);
+void mei_wd_start_setup(struct mei_device *dev);
+
+void mei_flow_ctrl_reduce(struct mei_device *dev,
+			 struct mei_cl *file_ext);
+
+int mei_send_flow_control(struct mei_device *dev,
+				 struct mei_cl *file_ext);
+
+int mei_disconnect(struct mei_device *dev,
+			  struct mei_cl *file_ext);
+int mei_other_client_is_connecting(struct mei_device *dev,
+				     struct mei_cl *file_ext);
+int mei_connect(struct mei_device *dev,
+		       struct mei_cl *file_ext);
+
+#endif /* _MEI_INTERFACE_H_ */
-- 
1.7.1

---------------------------------------------------------------------
Intel Israel (74) Limited

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.