mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
To: Dan Williams <dan.j.williams@intel.com>,
	Vinod Koul <vinod.koul@intel.com>,
	linux-kernel@vger.kernel.org
Cc: qi.wang@intel.com, yong.y.wang@intel.com, joel.clark@intel.com,
	kok.howg.ewe@intel.com, toshiharu-linux@dsn.okisemi.com,
	Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Subject: [PATCH V2 5/5] pch_dma: Support new device ML7223 IOH
Date: Mon,  9 May 2011 12:48:05 +0900	[thread overview]
Message-ID: <1304912885-6747-1-git-send-email-tomoya-linux@dsn.okisemi.com> (raw)

Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub).
The ML7223 IOH is for MP(Media Phone) use.
The ML7223 is companion chip for Intel Atom E6xx series.
The ML7223 is completely compatible for Intel EG20T PCH.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
 drivers/dma/Kconfig   |   12 +++++++-----
 drivers/dma/pch_dma.c |    8 ++++++++
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index a572600..6eb353c 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -200,16 +200,18 @@ config PL330_DMA
 	  platform_data for a dma-pl330 device.
 
 config PCH_DMA
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH DMA support"
+	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223)"
 	depends on PCI && X86
 	select DMA_ENGINE
 	help
 	  Enable support for Intel EG20T PCH DMA engine.
 
-	  This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
-	  Output Hub) which is for IVI(In-Vehicle Infotainment) use.
-	  ML7213 is companion chip for Intel Atom E6xx series.
-	  ML7213 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+	  Output Hub), ML7213 and ML7223.
+	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
+	  for MP(Media Phone) use.
+	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
 
 config IMX_SDMA
 	tristate "i.MX SDMA support"
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 2c052bb..466954d 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -956,6 +956,10 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev)
 #define PCI_DEVICE_ID_ML7213_DMA2_8CH	0x802B
 #define PCI_DEVICE_ID_ML7213_DMA3_4CH	0x8034
 #define PCI_DEVICE_ID_ML7213_DMA4_12CH	0x8032
+#define PCI_DEVICE_ID_ML7223_DMA1_4CH	0x800B
+#define PCI_DEVICE_ID_ML7223_DMA2_4CH	0x800E
+#define PCI_DEVICE_ID_ML7223_DMA3_4CH	0x8017
+#define PCI_DEVICE_ID_ML7223_DMA4_4CH	0x803B
 
 static const struct pci_device_id pch_dma_id_table[] = {
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 },
@@ -964,6 +968,10 @@ static const struct pci_device_id pch_dma_id_table[] = {
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA2_8CH), 8}, /* PCMIF SPI */
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA3_4CH), 4}, /* FPGA */
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA4_12CH), 12}, /* I2S */
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA1_4CH), 4}, /* UART */
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA2_4CH), 4}, /* Video SPI */
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA3_4CH), 4}, /* Security */
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA4_4CH), 4}, /* FPGA */
 	{ 0, },
 };
 
-- 
1.7.4


             reply	other threads:[~2011-05-09  3:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-09  3:48 Tomoya MORINAGA [this message]
2011-05-09  4:05 ` Joe Perches
2011-05-09  5:33   ` Tomoya MORINAGA
2011-05-09  6:01     ` Joe Perches
2011-05-09  6:41       ` Tomoya MORINAGA

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1304912885-6747-1-git-send-email-tomoya-linux@dsn.okisemi.com \
    --to=tomoya-linux@dsn.okisemi.com \
    --cc=dan.j.williams@intel.com \
    --cc=joel.clark@intel.com \
    --cc=kok.howg.ewe@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=qi.wang@intel.com \
    --cc=toshiharu-linux@dsn.okisemi.com \
    --cc=vinod.koul@intel.com \
    --cc=yong.y.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®